Precision cylinders

Stroke : 0.125 in - 16 in
Bore: 0.56 in - 4 in
Pressure: 200 psi

... application is tight on space, a Bimba Flat-1® is the answer. With 19 recent design enhancements this compact and reliable cylinder is now “Blue and Improved” in each of the eight available bore sizes. The new “F Series” ...

Force: 1,200 N - 104,900 N
Speed: 1 m/s - 1.6 m/s
Max acceleration: 50 m/s²

Electromechanical cylinders EMC: hygienic, variable, flexible, energy efficient • High-precision ball screw assemblies: for high performance with maximum cost-effectiveness • Complete building system ...

Stroke : 10 mm - 100 mm
Bore: 10 mm - 32 mm
Pressure: 100 psi

... FDF and FDXS Series double-acting cylinders are an excellent choice. The cylinders’ twin rods deliver two times the thrust while the non-rotating design and standard magnetic piston ensure precise positioning. ...

Stroke : 30 mm - 200 mm
Bore: 30 mm - 84 mm
Pressure: 100 bar

... hydraulic cylinders, with a special locking system between the cylinder rod and body. Round-shaped, these double-effect cylinders can be configured for linear-movement strokes, both ...

Stroke : 50 mm - 1,500 mm
Force: 25,000 N
Speed: 1.33 m/s

The EC5 Series provides our most robust line of electric cylinders for very heavy thrust loads. Precision-rolled ball screw types yield quiet operation, low backlash and high accuracy, with a selection ...

Stroke : 100 mm - 1,500 mm
Force: 13 kN - 100 kN
Speed: 500 mm/min - 10,000 mm/min

The electromechanical screw rams ALS is a universally applicable drive for a wide range of mechanical engineering applications. The system is particularly suitable for individual drive applications for linear drive tasks.  The ALS/R ...

Stroke : 0 in - 1,437.008 in

... requirements. The Tolomatic double purchase pulley actuator can double the stroke and velocity of a double acting cable cylinder with considerable cost-saving advantages. Double purchase pulley actuators can also be ...

Stroke : 0 mm - 6,000 mm
Speed: 0.2 m/s - 2 m/s

... with locking unit. with integrated guides 90° / Extruded profile in aluminium 25- 50 mm. / Stroke to 6 m. / Heavy duty precision series. / Rigid ball bearing system. / Carriage slide on ball bearings. / Translation ...

Stroke : 100 mm - 1,000 mm
Force: 2.5 kN
Motor power: 550 W

The heavy duty electric cylinders of this production series are built to impress even under toughest conditions. Whether there is intense heat or cold, dust, moisture, or shocks and vibrations, the accuracy in positioning ...

Stroke : 25 mm

SA 50 SHOT PIN Monobloc pneumatic cylinder with integrated robust precision guiding for the push rod. Housing made from high-strenght aluminum material, round cylinder dia. 50. Double ...

... high or low ambient temperatures. The Hydropa HYKS series of hydraulic cylinders exhibit a sturdy welded/bolted construction with honed and seamless cylinder barrels and ground, precision ...

Pressure: 200 bar - 250 bar
Speed: 0.5 m/s
Ambient temperature: -25 °C - 80 °C

Our new range of Series 1000 cylinders are specially designed for applications where a wide spectrum of versatility, functionality, and easy assembly is required in the application to be installed. With a precision ...

Stroke : 1,000 mm
Force: 100 kN
Speed: 0.1 m/s

... patented valve circuit on the cylinder Optimal response without delay and high dynamics Reliable load-holding valves directly on the cylinder Implementation of different steering strategies ...

CXSM Dual Rod Pneumatic Air Cylinder This kind of cylinder is double cylinder structure with high precision and dual output force,no rotation,better performance against ...

Force: 31.08 kN - 94.6 kN

SEOAM produces a high quality, high precision series of hydraulic cylinders designed to realize high-rotating speeds while maintaining a compact, slim, light-weight design.

Stroke : 50 mm - 1,000 mm
Force: 1,600 N - 33,300 N
Speed: 1.6 m/s

Stroke : 75 mm - 350 mm
Force: 60 N
Torque: 60,000 Nm

A complete range of very high precision brushless electric cylinders 3 sizes available Speed up to 800 mm/s High precision 25 µm Satellite roller screws Integrated brushless motorization Extreme ...

Stroke : 50 mm - 1,500 mm
Force: 60 kN
Torque: 35 Nm - 45 Nm

... control and precision torque control is transformed into precise speed control, precise rotation control and precise thrust control. This is a new revolutionary product for high precision linear motion ...

Stroke : 0.5 in - 8 in
Force: 2.22, 1.55 N

... position. The kits feature Airpot’s borosilicate glass cylinder and graphite piston material technology which allows the use of extremely tight tolerances to achieve a high precision fit and control of ...

Stroke : 0 mm - 300 mm
Force: 20 kN - 1,714 kN

Capacity from 10 to 550 Tn, stroke up to 300 mm. For push and pull applications. For heavy duty applications, high precision and involving high cycle life. Guide and sealing system of highest quality. ...

Stroke : 2 in - 12 in
Force: 889 N
Speed: 0.23 in/s - 2.2 in/s

When it comes to precision designed and superiorly engineered actuators, Venture’s name appears as most the prominent in the market. The stock of wide range of actuators (both available as standard and customized model) ...

1. Axis does not rotate, high positioning accuracy. 2. Compact, lightweight, space-saving design.

Screw-in Cylinders The intelligent force A new generation of great potential •Patented screw-in construction with exactly defined start of thread and mounting torque, eliminates the use of counter nuts •High manufacturing ...

Stroke : 0 mm - 40 mm
Force: 4.5 kN

capacity: 4,5 kN stroke: 40 mm - 120 mm depending of model DAF press cylinders are ready-to-use building blocks for plant and special machine construction. DAF press cylinders have a modular design ...

Master, Slave and Wheel Cylinders Simply put, the master cylinder generates hydraulic pressure that is transmitted via the brake fluid to either the wheel cylinder, in drum brakes, or ...