|
|
|
|
|
|
EP137
- Fiber reinforced thermosetting preimpregnated materials for aircraft parts(e.g.passenger floor).
- Woven fabric of E-glass filament yarn Style 0180, 48 g/m2, plain weave, preimpregnated with 40% epoxy resin EP137 (125°).
- Low-smoke, highly toughened and self-extinguishing epoxy resin system
- Very good FST behaviour
- Excellent adhesion to core materials
- Improved storage conditions at -5°C
EP137-03-40 consists of a E-glass fabric Style 0180, impregnated with the epoxy resin EP137. The highly-toughened resin matrix is a 125°C curing system with a high flameretardancy and low smoke behaviour at fire and provides excellent properties such as high interlaminar shear strength, adjustable tackiness and retarded flow during processing.
The prepreg is perfectly suitable to complement high performance light-weight composite structures meeting the highest requirements of structural interior applications as such as the passenger floor where it is used as a top layer to avoid electro-galvanic corrosion of carbon structure with aluminium and improve overall impact behaviour of the panels.
Both monolithic and sandwich structures can be easily manufactured with this prepreg. The curing can be performed by press, vacuum and autoclave moulding at a temperature range between 120°C and 155°C and a pressure of at least 0.07 MPa.
Such composite structures can be exposed easily to temperatures in the range of -55°C up to +90°C.
|
|
|
|
|
|
ST 70FR - Fire Retardant Glass Structural SPRINT®
- Award winning SPRINT® matrix
- BS476 parts 6 & 7 - best possible “Class 0” Rating
- BS6853 Annex B2 - R = 0.90 - 1.20
- Low smoke toxicity
- Suitable for rail, marine and civil engineering structures
- Self extinguishing
- Halogen-free
- 70C Curable
- Suitable for Lloyds and MCA Compliant Structures
- Suitable for monolithic and sandwich structures
- Long outlife at room temperature
- Excellent laminate quality, from vacuum-only processing
- Fire retardant : meets FAR25.853 12 second & 60 second vertical burn
: meets MVSS 302
ST70FR is part of the range of SPRINT® products. This unique product range provides technically and commercially competitive engineering materials, ideal for use either solely, or in conjunction with other products from within the product range along with other SP products from Gurit.
ST70FR is a fire retardant hot melt, Diuron free epoxy SPRINT®. This is ideally suited to the manufacture of thick sections requiring fire protection. It can be cured at temperatures as low as 70°C, but can also be used for the rapid manufacture of components through its 25-minute cure at 120°C. All of this can be achieved together with an outlife of 28 days at 21°C.
ST70FR is designed for vacuum bag processing and offers excellent mechanical performance on glass fibre reinforcements. Currently ST70FR is manufactured into a Single Sided SPRINT® structure primarily with fibreglass reinforcements such as woven WRE581T, WRE850T fabrics and multiaxial XE905 and QE1174 stitched fabrics. Other styles will be available to order.
|
|
|
L-501 is a 250°F (121°C) curing, high peel strength, flame retardant, epoxy prepreg available on fiberglass fabrics such as 7781 style or other styles as requested. L-501 is intended to be used as a single ply or multiple ply skin for aramid/phenolic honeycomb, aluminum honeycomb or PVC foam core sandwich panels.
|
|
Nelcote Advanced Composite Prepregs
> Global manufacturing and supply chain management experience - Park's 50 years in Advanced Materials
> Structural design databases, including FAA accepted AGATE design allowables for key composite materials
> Nelcote composite materials are available in a variety of reinforcements and product forms including broadgoods, unidirectional tapes, biased tapes and molding compounds
> A broad range of resin chemistries are available including epoxy, polyester and phenolic resins
> Customer focused company with a history of proven successes with large and small customers
> Quality Management System Based on ISO 9002 and AS 9000 standards and procedures
> Extensive technical, research and development resources
|
|
Nelcote Advanced Composite Prepregs
> Global manufacturing and supply chain management experience - Park's 50 years in Advanced Materials
> Structural design databases, including FAA accepted AGATE design allowables for key composite materials
> Nelcote composite materials are available in a variety of reinforcements and product forms including broadgoods, unidirectional tapes, biased tapes and molding compounds
> A broad range of resin chemistries are available including epoxy, polyester and phenolic resins
> Customer focused company with a history of proven successes with large and small customers
> Quality Management System Based on ISO 9002 and AS 9000 standards and procedures
> Extensive technical, research and development resources
|
|
|
Hexcel has produced more than 700 varieties of honeycomb over the past 60 years. Today, HexWeb® honeycomb is available in a wide range of materials and cell configurations, and additional products are continually developed in response to new uses for honeycomb sandwich construction.Hexcel not only supplies honeycomb in blocks or sheet form. We also supply honeycomb sandwich panels for aerospace and industrial applications. Hexcel also supplies Engineered Core honeycomb parts, manufactured to customer specifications in tight tolerances using Hexcel's honeycomb expertise.
|
|
|
|
|
|
3-dimensional fibreglass reinforcements, Nida-Fusion STO complexes are composed of a sheet of closed-cells foam covered with a reinforcing fibre layer on each side. These three elements are linked together by fiberglass bridging strands, which go through them obliquely, forming triangulations Truss Network.
For a very competitive price, Nida-Fusion STO complexes allow you to build sandwich constructions offering :
Very good flexural strength,
Excellent fatigue and delaminating resistance,
Good high temperature and fire resistance,
Shaped structures with thickness variations,
Excellent thermal insulation
Nida-Fusion STO is patented and is offered in 2 variations :
Nida-Fusion STO complexes made of rigid foam and used for the production of planar structures without thickness variation,
Nida-Fusion STF complexes made of flexible foam and used for shaped structures with thickness variation..
Nida-Fusion STO complexes can be tailored exactly to your needs (Foam, choice and weight of reinforcements, orientation and spacing of the triangulations), and are made to order.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Simultaneous resin & fibreglass spray-up is nowadays employed in a great variety of applications.
Matrasur Composites proposes a series of spray-up machines which cover a wide flow rate range, from small complex parts to large parts.
These machines can be equipped with 6 different spray-up guns and 4 different fibre choppers.
Contact us in order to determine together the chopper unit that adapts the best to your application. Rollers and other accessories complement our chopper systems.
|
|
|
Insulating fiber glass braided sleeving with acrylic coating; temperature CLASS F, 155°C, dielectrical strenght 3kV
|
|
Glass fibre braided sleeving with polyurethane varnish; Class F
155°C
|
|
|
Glass fibre braided sleeving coated with silicone rubber
|
|
Single-Ply, Silicone-Coated Woven Fiberglass Hose
Applications of Flexfab's single ply silicone coated woven fiberglass hose...
Recommended for low pressure handling of higher and lower temperature air, dust or fumes
Ideal for heating applications where minimum weight is required, and where air flow and friction requirements are not severe
Good for heater applications
Not recommended for handling liquids or abrasive materials.
Construction of Flexfab's single ply silicone coated woven fiberglass hose...
Flexible. Chemically treated, helically wound, bronze plated, spring steel wire reinforcement. Silicone-coated woven fiberglass fabric covering. Continuous filament fiberglass cord between coils. Heat-vulcanized for maximum rubber-to-wire bond. Lightweight, non-kinking, easy installation. Meets commercial low temperature flexibility. Temperature range -65°F to +450°F (-54°C to +232°C).
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
POLYTHERM® is the best system we offer. It is a fiberglass jacketed, polyurethane foam insulated piping system for above and belowground distribution of liquids from -320°F to 250°F.
POLYTHERM® is a fiberglass jacketed, spray applied polyurethane foam insulated piping system for above and below ground distribution of liquids from -320°F to 250°F. PERMA-PIPE's multi-directional filament winding process produces a high strength fiberglass reinforced polyester resin jacket over the insulation for maximum protection from the environment. This high-strength fiberglass jacket is applied to systems having an outside diameter as large as 48 inches. Electric heat tracing is an option with this system.
POLYTHERM®'s spray insulation process assures void-free insulation. By applying insulation before the jacket is applied, complete visual inspection of the insulation is performed. This process assures void-free insulation and therefore, maximum thermal efficiency to provide optimum performance of cryogenic and heat thermal distribution systems. The POLYTHERM® system is fully engineered to job specifications, thereby reducing field costs by providing custom made, factory-fabricated fittings which reduce the number of field connections as compared to the field kit method.
- Temp Range: -320ºF to 250ºF
- Max Pressure: Determined by the carrier pipe selected
- Pipe Sizes: Nom. Diameter 1/ 2" - 36" (standard), Nom. Length 20' and 40'
|
|
| ... products without technical information |
| |
Straight Flute Routers for superior material removal in plexiglass and stacked material applications
RobbJack routers and cutters set the industry standard for close tolerances and consistent performance. This quality is achieved by a continuing dedication of resources to research and development. In fact, we’ve been a leader in machine development and manufacturing techniques, for over 40 years . . .
|
|
|
Routers for Fiberglass and Non-Metallic Materials in Fractional and Metric...Quality selection of Wood Routers
|
|
Specially for: transport and industrial environments.
BK is made by the hot pressmoulding process.
- 3 sizes available
- Rigid and self-supporting
- Quick and easy to load / unload
|
|
Hot press moulding process enabling a complete range of functions and also a variety of fittings to be produced.
K² is suitable for routing cables over stretches with a complex configuration.
- 9 widths, 3 heights: 19 sizes in stock
- Unrivalled speed of installation by interlocking
- Complete system of fittings
|
|
Our stacking door technology has been proven in practical use throughout the past 30 years.
While opening, the door panels stack into a pack just behind the lintel so effectively, that lighting devices, lifting platforms, crane runways and other fittings located on the ceiling are not affected.
All functional components (guide wheels, electrical feed lines, anti drop device, etc.) use minimal space and are well protected in the lateral tracks. Fibreglass is mainly used for the cladding of the doors. Our fibreglass is manufactures in an in-house developed process and provides a light transmission of up to 78 %. This provides light-flooded working areas which reduces energy consumption in the daytime and creates a pleasant working ambience.
The twin-walled fibreglass elements provide excellent thermal insulation - the all around sealing of the door prevents unnecessary energy losses and draughts in the building.
|
|
The SPACELITE HTU is an exceptional sectional door that combines the opening principle of a standard sectional door with the advantages of a Butzbach stacking door in terms of product features and material used.
The translucent fibreglass door panels are connected hinge-free. Components such as hinges, steel ropes and helix cables that are prone to failure and require frequent maintenance are not used in the door design.
|
|
|
|
|
|
OVERVIEW
X.FIBER® is a laminated material, designed and patented by Daniel GASTEL.
This composite material comes in the form of woven fiber sheets, which can be manufactured in several different ways:
- glass, carbon, aramide, ceramic fibers or
- any combination of two or more of these different fibers.
The sheets are held together by a heat-hardened resin, the resulting material delivers both very high technical performance and excellent peelability.
ADVANTAGES
Lightness
When the demand is for lighter materials, X.FIBER® proves itself by far the lightest of laminated materials (5 1/2 times lighter than steel!).
Strength
Being both lighter and stronger, it can be used to great advantage as a replacement for carbon and stainless steels..
Endurance
It is comparable with laminated metals, and can be used to replace INTERCOMPOSITE® in use at temperatures above 266°F (130°C).
Its mechanical properties remain unaffected by the rise in temperature.
Rapidity
The sheets can be peeled by hand, without the need for tools of any kind.
Ingenuity and Economy
Once they have been peeled, the sheets remain flat and free of deformation. They remain fully re-useable.
|
|
|
|
see the results for the following category : 
