|
|
SCHMIDT® PneumaticPress
Direct Acting Presses
No. 20 to 29
Force range 1.6 to 43 kN
Various cylinder chamber options
Toggle Presses
No. 32 to 36
Force range 15 to 60 kN
For assembly these presses are the finest in the field. A modular system,
consisting of cylinders, pneumatic and safety technology, allows for two
hand operations. These EC-type approved presses can be integrated into
fully automated production lines.
Pneumatical and mechanical adjustment of
- stroke, force, speed
High Flexibility
- fast and repeatable tool changeover
- quick and repeatable height and stroke adjustment
Precision alignment
- smaller than 0.05 mm due to precision ram and table bore
- accurate ram guiding
Low maintenance, low noise levels, optimized for air saving |
|
| The Waterbag presses for rubber belts with their modular design and a bag containing water as pressure system are worldwide famous under the name "Kleber Press". These presses are particulary suited for long and wide splices like on steel cord belts or for finger splices. |
|
ERmet : Modular Pressfit Tools: For Male Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules.
ERmet : Modular Pressfit Tools: For Female Connectors
ERmet connectors can be end to end mounted in modular layout. To be able to pressfit the selected connector layout for your application in a rationalized way, we have designed the necessary pressfit tools to be modular too. This is true of the tools both for male connectors and for female connectors. The tool bases, also termed anvils, are fixed in a tool holder. Each connector module requires an appropriately sized tool module.
The standard tool holders are designed for two 50 mm modules (modules A, B, L and M), pressfitting a total module length of 100 mm. Due to the modular tool configuration, pressfitting can be carried out in any order. Using filler elements, it is also possible to pressfit just individual modules. |
|
These presses are suitable when constant precision and force are required throughout the entire stroke of the pin.
They are used for the Assembly of bushings and bearings, deformation of sheets, assembling, etc. |
|
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free |
|
Pressure capacity: from 1000N (100Kg) up to 80KN
(8,000Kg)
Position repeatability: +-0.005mm
Sensor function: Set position stop, Set load stop, Set
distance stop,
Const. Load / Set Timed Stop
Const. Load / Set Stop Position
External input/output: 17 input, 16 output
Clean class: Class 10
|
|
SCHMIDT® ServoPresses 405 to 460
- suited for forces from 15 N to 150 000 N
- free positioning accuracy of 0.01 mm (with full speed under changing loads)
- variable drive profiles
- simultaneous force and distance close loop control
- patented compensation of dynamic bending effects in real time
- real time process monitoring and quality evaluation
- robust and precise mechanical design
- operator safety by dual channel integrated safety circuits
Machine and process safety
- automatic lubrication
- forced cooling
- built-in mechanical clutch for increased reliability.
Cost effective assembly often requires using parts with significant
tolerances. The goal is to automatically compensate these part
tolerances to create precision sub-assemblies.
The SCHMIDT® ServoPress range is a synonym for such intelligent
assembly processes. The ServoPress modules are available for automatic
assembly lines as well as stand alone working cells, EC type approved. |
|
NEW! Versatile hydraulic multipurpose press designed to perform drawing operations, punching, embossing and hydromechanical forming. The four column press is designed with a one piece welded steel frame. It is manufactured based on FEA stress analysis. The slide is equipped with an 8-point gib guiding system. The cushion and third cylinder can be selected as options and are available in sizes that correspond to the available press forces.
Press force range: 1000-3150 kN.
Press bed range: 1000-1600 mm. |
|
Thermal Presses heat the staking post/insert while applying pressure axially to permanently set the parts. Advantages of the thermal heat staking/inserting process include:
Reliable permanent inserts
No particulates or noise
Multiple level inserting/heat staking
Multiple size inserts
No whitening when degating
Better cosmetic appearance when heat staking and swaging
High tolerance to mold release, colorants and other additives
Tolerant of resin grade variations and regrind percentages
Low initial equipment cost
Ease of operation and assembly
Handles slippery thermoplastics
Easier maintenance in a low-tech environment |
|
The various PCK-press models are designed to cope with the severest demands in the production field. The design of these presses combines strength and simplicity of use. They are easy to operate, easy to maintain, and carry all required safety monitoring devices for the safety of the machine and the personnel. The PCK-press can be used as a stand-alone press or can be incorporated into an automated production line.
Basic equipement, common to the whole range:
• Capacities from 630 to 3 200 kN.
• C-frame made of flame cut welded steel plate.
• Electro pneumatic clutch-brake combination.
• Variable stroke (semi-automatic adjustment).
• Motorised ram height adjustment.
• Hydraulic overload safety device.
• EC-approved.
Optional equipement:
• Modified dimensional specifications.
• Tool-clamps and die lifters.
• Tool loading arms.
• Pneumatic blank holder.
• Electronic roll-feeder or other feeding devices.
• Force indicator.
• PLC-control.
• Feed line.
• Finished part packaging and handling.
• Soundproof housing.
• Custom made modifications and designs. |
|
| The body is welded with steel plate to gain good rigidity and stable precision. The crankshaft is placed vertically, so the structure is compant and the contour is beautiful. Using the combined pneumatic friction clutch and brake, so the engagement is smooth, the action is agile and the noise is low. Gear pair adopts the flooding system lubrication. The slide block is six-face rectangle with longer guide track whose face is bronze panel. Meanwhile an import hydroulic dverload protector can be installed in the slide block with imported air pump and ring seal. Its action isagile and reliable. There set lifting balance cylinder at the slide block with imported ring seal. The air pipeline is controlled by safety dublex value, The press can be equipped with air cushion, automatic feed shaft, photoelectric protector, and various automatic equipments. The die set is adjusted by motor over KLPC press. This kind of press conforms to the safety standard of press. |
|
This model of press has been engineered for a big aircraft company to straighten wings and others parts.
The cylinder is fitted with a digital follow meter which indicates its position throughout its travel. On contact with the part to be straightened, the operator positions the zero point and from here uses this operation to follow the lowering of the cylinder on the meter. A bottom dead center can be programmed. |
|
Our hydraulic compression presses are of the arch or pillar type. These presses can be fitted with electrical, superheated water, steam or oil heating systems.
System break-down :
- Thrust force: 675 tonnes.
- Slide travel: 1000 mm.
- Maximum distance between tables : 2200 mm.
- Platform dimensions: 1150 x 970 mm.
- 4 heating plates (2 on each platform of the press and 2 in an intermediate position).
- Cartridge type electrical heating system.
- Maximum temperature: 250°C.
- Pressure check.
- Heating programming and check.
- Contrôle et programmation de la chauffe
- Recording of the parameters by PC and printing out of the curves.
- A lifting table for loading by the operator. |
|
| The technicality and experience of our design offices enables us to handle the most diverse requests and to develop machines to special specifications. |
|
| The press is used for splitting adjusting, maintenance and try-out operations on dies and molds (thermoplastics, die casting, thermosetting, rubber and blanking) and it is possible to inject special waxes, at low pressure, into the mold. |
|
Our electronic mold spotting try-out presses are innovative and unique. Appreciated world-wide for their high quality and precision, they continue to provide maximum reliability years after purchase. Consistently the Millutensil presses offer outstanding advantages to all die and mold manufacturers.
ADVANTAGES:
- Quality dies and molds are produced quickly
- Fast checking, adjustment and die and mold injection testing
- Remarkable savings in labour costs
- Easy to use; error proof operation
- Movements can be repeated with absolute precision
- The upper half of the die or mold can be rotaded 100° or 180° (option)
- The lower half of the die or mold can be shifted and turned 70° to either the left or the right.
|
|
| 2PACK double point double sided presses are the result of a long and fruitful cooperation with our customers. A welded and stress-relieved monobloc frame, a generously dimensioned drive and a long high-precision ram guiding system ensure perfect mechanical operation. The absence of structure below floor level avoids the need for special masonry work, while still providing an ergonomic working height. The tool zone is designed to receive an enormous diversity of tools, especially follow-on tools. |
|
| Thanks to its generously dimensioned frame with main plates that lock into each other in order to relieve the welds from shear stress, the PACK-press is very attractive and can suit many purposes. Its rational design allows its use in a lot of blanking and drawing applications. The single point geared PACK-presses are provided with all requested equipment to sustain the most severe production conditions. |
|
Eccentric Presses
KLP300
300 tone eccentric presses, which are 1300 x 1400 table sizes,
appropriate for high quantity production. |
|
The main feature of our electric press is the coaxiality of the engine, the reducer and the pin of hafting.
The characteristic of the system can be summarized as follows:
- High-output absolute coder Engine
- Planetary Reducer
- Screw with satellite rollers which makes it possible to support loads raised under the most severe conditions. This one is maintained by 4 oblique bearings assembled in opposition thus making it possible to support the efforts in the two directions
- Pin guided by a casing with circulation of balls which ensures also the anti-rotation one.
This system limits the losses of power due to frictions and ensures the correspondence between the power developed and that available on the pin.
Such characteristics associated with CN which manages the force as well as the position make it possible to carry out cycles with many variations speeds, race and power.
The press can work as well horizontally as vertically. |
|
Electro-hydraulically driven Blanking Press, Model 150-50/100
For producing tensile specimens and circular blanks of ferrous and non-ferrous metals. Tensile test specimens in accordance with the specifications of various standards or conforming to individual requirements can be produced using appropriate blanking tools. The blanking stroke is initiated by two-hand controls combined with a press safety relay. A force display unit is integrated into the front panel and records the blanking forces. The blanks are discharged onto a chute and are accumulated on the left of the instrument. The blanking press is available in two versions. |
|
| For the extrusion press industry we offer a complete programme - from the proven and reliable extrusion press through to the automatic delivery and handling equipment, furnace equipment, surface coating plants or production control and monitoring systems. Whether new construction or modernisation, we supply everything from a single source. |
|
| The PM presses have been designed to cope with the most severe demands and the very specific conditions in the world of forging and die-stamping. The compact structure of the frame ensures a very high stiffness that reduces distortion during forging. These machines are fitted with huge flywheels providing the energy for forging with only moderate speed loss. Special care has been taken in the design of the ram. The ram is guided by 8 very long hardened bronze high precision guides, adjustable in each direction by non-reversible shims. The forging and die stamping press bolster is fitted with a mechanism for accurately adjusting the height between the bolster and the ram plate. |
|
Modern open-die forging plants consisting of the forging press and one or two rail-bound manipulators are highly dynamic production plants.
Apart from the pure production speed, the main focus today is on the achievement of minimum forging tolerances and a consistently high level of quality. Furthermore, the logging of the production process and possible deviations from the specifications is demanded, in particular for products for energy engineering and for the aircraft and aerospace industries.
To meet these demands, SMS Meer has developed the new optimisation program ForgeBase. It is based on the experience gained with the forging programs MD-DATAFORGE® and COMFORGE®. Before the merger of the open-die forging departments of Mannesmann Demag Metallurgy and SMS Eumuco GmbH, these pro-grams had been developed and offered separately by the two companies. |
|
Our Food Presses and Fresher Under Pressure ® technology unleashes the power of High Pressure Processing (HPP), using water pressure to make food safer, to last longer and to taste better.
Fresher Under Pressure systems destroy many food-borne pathogens, so foods are safer. Other organisms that cause foods to spoil can't take the pressure either, so many foods will stay fresher, longer. Because HPP doesn't expose foods to the potentially damaging effects of high temperatures, foods retain more of their fresh taste, texture, color and nutrients.
Please explore the http://www.avure.com site to learn more about high pressure processing of food using Food presses. Every day, progressive companies are recognizing Fresher Under Pressure as the optimum long term, profitable, consumer-friendly solution. Freshness, taste, texture, nutrition, safety, convenience, shelf life, quality - it's all there for the benefit of processors, distributors, retailers and consumers. |
|
CPA Technology (Controlled Punch Adapter)
permits the production of complex sintered parts in net-shape technology, particularly for use in the automotive industry
Hybrid CNC powder presses
combination of mechanical and hydraulic presses, for the achievement of high production capacities |
|
| Our tryout presses are designed for rapid and efficient die tryout. Special attention has been paid to protecting the machine from abrasive projections from grinders used by the operators. |
|
Type WSP 60
Capacity 60 ton
Stroke 400 mm
Power 3 kW
Voltage 400/3~
Frequency 50/60
Delievery flow(Lt/min) 3,3/13,5
Oil tank capacity (dm)* 20
*(Tellers 46)
Pressing speed 4 mm/s
Approaching speed 9,2 mm/s
Return speed 12,6 mm/s
Pressing force 588 (KN)
Pressure max. 235 (bar)
Weight 685kg |
|
Table-Top Platen Presses Type T :
Table-top presses are used for small pressing samples. With their tabletop design they can be set up easily and quickly.
For simple processes: Type P 200 T
For higher temperatures: Type P 200 E /P 300 E
For complex processes: Type P 200 P |
|
... see all the products in the category
Presses
|
|
|
