|
|
|
Transfer SpeedFeeder has been developed especially for automatization of presses with multi-tool sets. Easy to operate with a hand-held terminal and AP&T's software LOGOS. Very high stiffness is reached with parallel motion of motors, this gives possibility to use high accelerations during clamping and lift motion.
|
|
Transfer systems for the transport of parts with the help of gripper rails in the complete sector of non-cutting shaping.Our transfer systems combine both the individual tools of a transfer press, as well as linking individual presses.
In accordance with the existing technical capabilities and customer needs are different sizes and variants feasible.
The equipment are based on our approved mechanical subgroups and a modern control and drive technique. The control control systems are preferably equipped with integrated Siemens components. By request are other control units available, for example by Allen Bradley.
Our transfer systems are fee-programmable which means that the positions and the displacement courses of the gripper rails (closing, lifting and transport) can be determined by the program within the limits of the technical data. According to the application or the specification the individual servodrives are synchronised either to each other or to the press run.
|
|
|
The Leanmaster, the economic solution for filling tablet containers, was designed to permit the integration of various functions such as deburring and de-dusting, metal detection and in-process control. The tablets are discharged into their containers by vertically and horizontally pivoting conveyor belts. The fully automatic discharge can use up to 99 containers, which can, for instance, allow fast and easy removal on pallets. The Leanmaster is operated through the familiar user interface at the press terminal.
|
|
PMT: transfer line for quick EPS or EPP moulding of simple and complex items.
Ideal for large series (home appliance bases with film coupling, etc.)
The system holds three half-moulds that allow for simultaneous operations in masked times, like loading and unloading on one side while moulding on the other.
This series offers a wide range of mould area sizes, from 925x725 to 1200x1600 mm. The PMT supports multiple optional accessories and automation for loading (films, inserts...) and unloading of the processed items.
Alessio is about to introduce a new PMT model specially designed to load thermoformed caps and complex inserts, for the helmet market and others. This new solution will offer multiple advantages:
- Double production capacity of complex items
- No down times for load/unload
- Zero cost for special tools
- Total operator safety
- EPS moulding with inserts and complex geometries
|
|
|
Electromechanical NC joining systems systems offer significantly more advantages than hydraulic presses. NC drive control allows accurate positioning or force-controlled joining and force-displacement evaluation in both the compression and the tension direction. The new generation of NC joining modules is outstanding for its extremely compact design with integral piezoelectric sensor.
|
|
The electro mechanical assembly units of the PREFERENCE SERIES are available in a large selection of force ranges and nominal strokes. Due to their modular construction, the units can be integrated in automated assembly lines as well as in manual work-places. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
- Round steel housing with mounting flange
- Ball / Roller gear drive
- Force transducer
- Axial bearing
- Press ram
- AC-servomotor
|
|
Pressure capacity: from 500N (50Kg) up to 120KN
(12,000Kg)
Position repeatability: +-0.005mm
Sensor function: Set position stop, Set load stop, Set
distance stop,
Const. Load / Set Timed Stop
Const. Load / Set Stop Position
External input/output: 17 input, 16 output
|
|
| ... products without technical information |
| |
The automatic strapping machine mod. 078 is ideal to vertically strap pallets or stacks of corrugated carboard that need to be kept compact and together during transport and storage.
It can either be combined with automatic lines in which it exchanges input and output signals or it can work separately.
|
|
|
The Power master 10481 is a high performance strapping press of the most recent generation, manufactured in our plant in Wuppertal. With an infinitely adjustable compression automatic height seeking of incoming loads for faster troughput and numerous variations of pallet and load handling equipment for feed, center and turn the Sander power master can be integrated very easy in automatic packing lines. As a special feature the electric motor driven compression platen includes a permanent accurate compression sensing which is a requirement in the corrugated and paper industry. This ensures an intermittent further compression cycle. Both PET or PP strapping material can be used with the machine. The Sander GS-41 strapping head guarantees a solid vibration seal joint without any emissions of vapors.
|
|
JN-85PBTAPN
Features:
- Suitable for bigger carton/ paperboard or pre-transported forming-case strapping.
- Equipped with 2 sets of photocell and light-duty air-pressing bar.
|
|
Precise tension control is essential in maintaining accurate register and reducing paper waste during make- ready and production.
MEGTEC infeeds deliver maximum productivity by providing stable web tension over wide operating ranges.
MEGTEC infeeds are available as independent units or integrated into MEGTEC pasters.
Shafted and shaftless technology is available to suit all applications from book printing, newspaper printing, to high-volume offset printing.
|
|
| ... products without technical information |
| |
The two twin-channel PME modules (MP85 and MP85DP) from HBM provide the optimum solution for monitoring press-fit and assembly operations.
Almost any commercially available transducer can be connected to the amplifiers which operate synchronously and in parallel. The industrial design and the standardized CANopen and Profibus DP interfaces, or digital I/Os alternatively ensure optimum connectivity to the automation environment.
Features and benefits:
Twin-channel amplifier
Comfortable integration into automation system via field bus interfaces
Intelligent signal conditioning and powerful algorithms for monitoring of the fitting process
Results can be saved directly in SPC format
Industrial design.
|
|
|
|
|
|
The PRO Module was developed for the monitoring of assembly and test applications. Its electronics are housed in a compact enclosure that is DIN rail mountabel for easy installation. The Ethernet port allows for easy communication back to the Promess application software running on a standard PC. Multiple PRO modules can also be network to a central data collection point. The PRO Module is powerful yet simple to use making it perfect for monitoring assembly applications such as press-fit, staking, crimping or riveting. On the other hand the system is powerful enough to tackle more demanding test applications where accurate hight speed data collection and advanced analysis are reuqired. Promess provides the complete system including electronics, software, sensors.
Promess will assist in the design and selection of the sensors best suited for your specific application as well as in the initial start-up.
Features
- In-process quality verification
- Part traceability
- 2 high speed 24 bis analog inputs per module
- 1 encoder input per module
- Compact modular design
- Defined database
- Data export funtions
- Fieldbus options
- Auto calibration for sensors
- Diagnostics for setup and trouble shooting
- Network multiple systems
|
|
Tool Change Rack - DUNKES Check-Lift System
Tool weight:
* up to 5000 kg
Plants/Systems
* Combined presses for blanking and drawing methods inc. tool ba and automatic loading and unload
|
|
The PPS can be mounted to the back or side of the press. In many cases it is fixed permanently, but swing-aside and even mobile versions are also available. Configuration and layout are flexible, allowing the system to be adapted to virtually any environment
* die Xchange time 15mn
* accurate, repeatable positioning
* stroke up to 2,40 m
* built-in safety mechanism using sensors to monitor movements
* ready for full electric control, optionally with appropriate switching module
|
|
PL Terminal
Paperless documentation is a valuable improvement, particularly in pharmaceutical production.
Rital Terminal
Fette has developed a specially modified terminal for the 102i galenic press.
Wireless Terminal
Autonomous, wireless operation of the press from outside the production room is a key requirement for products that are toxic and hazardous to the operator.
Terminal with printer
This terminal is the standard version delivered with Fette tablet machines.
|
|
| ... products without technical information |
| |
|
Ortlinghaus supplies also long-range accessories beside the press clutches for many years for the efficient control and monitoring of the press drive: hydraulic control units with press relief valve and soft dome and - brake characteristic of hydraulic aggregates turning introductions electronic slip controls of questions it us after aud your press optimally co-ordinated accessories.
|
|
Clutch capacities to:
516,000 lb·in
58.260 N·m
Brake capacities to:
336,200 lb·in
37.960 N·m
Airflex FSPA packages feature drum type CB or VC air applied clutches fastened to standard bearing-mounted flywheels. These clutch/flywheel assemblies are then combined with drum type CS and CTE or disc type DBA spring-applied, air released brakes. Although designed primarily for punch press use, they have found application on all types of cyclic equipment. Airflex press controls feature two independent circuits electrically interlocked and monitored to provide two-hand protection.
|
|
... safe, precise, dynamic.
The creativity and many years of experience of our engineers form the basis for innovative products.
HOERBIGER press systems allow you to achieve synchronous positioning accuracies in the µ-range and increased productivity, while guaranteeing the highest demands on operational safety.
Modular systems for most variable requirements:
When exact positioning is required - Systems for CNC-press brakes.
Economical and efficient - Systems for conventional press brakes.
|
|
Precise tension control is essential in maintaining accurate register and reducing paper waste during make- ready and production.
MEGTEC infeeds deliver maximum productivity by providing stable web tension over wide operating ranges.
MEGTEC infeeds are available as independent units or integrated into MEGTEC pasters.
Shafted and shaftless technology is available to suit all applications from book printing, newspaper printing, to high-volume offset printing.
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
|
|
