|
|
The synchronization of press brake adopt the technology of full loop electro hydraulic servo control, the positioning signal of the upper beam are feed back by raster (light-ruler) to CNC system and CNC system will check the opening size of synchronizing valves, adjusting the inlet oil amount, to realize the synchronizing movements of the upper beam (Y1, Y2) and keep the worktable are always in parallel situation. Following the situation of sheet metal to be bended, CNC system control automatically the amount of the crowning compensation of worktable to realize that angle being bended of workpiece can keep same a long the full workpiece length.
PLEASE WRITE ALL ENQUIRIES ONLY IN ENGLISH!
|
|
|
|
|
|
AD-S SERIES
CNC Synchro Press Brakes
The S is available in up to eleven axis configurations. It is a machine truly designed to decrease setup time. The powerful yet simple control will automatically calculate the bend sequence, bend angle, back gauge retraction, bend allowance, and features collision protection. The ram positioning system allows real time monitoring and complete control of all ram speeds, positions, and dwell times. Imagine when handling large sheets, the operator can actually program the pressing speed down to a point where whip up and part dishing are virtually eliminated. Once the bend target has been reached, a short and slow speed return point can be programmed; giving the operator a better way of handling it after the bend is made. Programmable ram tilts, which are useful in conical or fadeout work, are also a feature of this machine. The automatic calibration and + - 0,01 mm positioning accuracy make S a great partner for the production of precision components, both large and small.
Standard Equipment
CNC Controlled Motorised Crowning
Numerical Control Cybelec ModEva 10S Windows with Software
or Delem DA-66W%u2022 Y1, Y2, X, R (4-Axis)
European Clamping system
Servo Motorized 2 axis Back gauge ( can be differ on big sizes)
Sliding sheet support Arms with T-Canal and Tilting stop
Note : E series CNC 3 axis Press Brakes is also in the product line of DURMA.
|
|
As the specialist in press braking thin sheet metal, Safan offers the most sophisticated range of press-brakes, from the lightest-duty SAFAN E-Brake with a pressure force of 35 tons and a working length of 1.25 metres to the heaviest-duty SAFAN H-Brake with a pressure force of 480 tons and a 7.50-metre working length.
The revolutionary SAFAN E-Brake is the first servo-electronic press-brake in the world and was developed by Safan as an entirely new concept. A revolutionary feature is its servo-electronic drive system based on the pulley principle, which ensures a very even distribution of forces. This means that in 98% of cases no crowning table is required.
The servo-hydraulic SAFAN H-Brake stands out because of its fast hydraulics, robust construction - with independently mounted measuring frame for optimum accuracy - and its fast and accurate backgauge systems.
|
|
CAPACITY RANGE
Bending tonnage : from 350 to 10000 kN
Bending length : from 1250 mm to 6100 mm
Special size press brakes in capacities other than the standard are also
available in our production.
MAIN FEATURES
- Downstroke bending beam on two cylinders which are fully supported in low-friction slideways.
- Rigidly welded, monoblock steel frame for minimum deflection under load.
- Full electronic synchronisation with a proportional valve technology
- Maximum bend accuracy and repeatability assured through constant monitoring and correction of beam parallelism by a CNC system.
- Stroke-depth measurement through high precision linear scales
- CNC-controlled ballscrew backgauge systems with AC or DC drives
- Compactly-wired electrical cabinet with ventilation
- All-European hydraulics and electrical / electronic components.
|
|
|
|
|
|
CNC and conventional hydraulic press brake
BuBend
BuBend has maximum precision in bending process. Because, BuBend series pres brakes are designed to solve the problems occured during sheet metal bending process.
High resistance body provides many abilities and also to work in small tolerances.
BuBend hydraulic pres brakes are completely equipped with customer prefrence and the basic principles are human safe and comfort.
Butek Machinery is designing and manufacturing special purpose metal working machines for international companies. Now, we represent the state of the art machine series BuBend hydraullic press brakes with years of experince in sheet metal forming technology.
uring manufacturing process all details are examined by technical staff according to usage conditions.
In CNC machines, high accuracy linear encoders are used to increase synchronization and user domination on the machine.
On the other hand, Butek Machinery improves own technology and manufacturing hydraulic cylinders itself.
Heat treated and hard chrome coated hydraulic cylinders are tested under overload and than assembled.
Angle measuring control unit is best solution to increase productivity. According to your request BuBend will equipped with angle measuring control unit.
The main problem in bending of sheet metal is different angles in middle and end sides.
|
|
Ursviken OptiForm - the easy-operated, smart press brake
UMV has developed a new press brake with high productivity and exceptional technical performance at a competitive price. It is appreciated by customers who do not want to lower the standards of quality, accuracy or safety just because they want an easy to operate machine at a low price.
The OptiForm is a model which is simple to program and use and is well suited for customers who wish to upgrade from a manual to a CNC-controlled press brake.
OptiForm has control system Cybelec DNC 880, 2-axis back gauge, manual or CNC-controlled crowning, manual or CNC table brackets and manual or hydraulic clamping of upper tools.
The press table has slots in the table for single V tool with manual clamping. As safety equipment, choose between light curtain and Lazersafe
|
|
G BEND
Standard equipment
- Stroke 250mm - Daylight 515mm.
- Industrial control Cybelec ModEva 10S with graphical simulation.
- Y1, Y2 independent hydraulic cylinders, proportional valve technology.
- Extra welded frame on the sides.
- Ram guidance with double roller bearings.
- Efficient, low noise, high speed, superior accuracy hydraulic system.
- 2 axis high speed back gauge system (500mm/s X) X+R with double
- linear quides.
- Standard CNC controlled anti deflection system.
- Standard heavy duty front gauges on linear guide.
- Mechanical upper tool clamping with fast tool change horizontalvertical loading & unloading.
- Mechanical lower tool clamping.
- Standard Laser safety Fiessler
- German origin, automatic height adjustment, CE certified.
- Wide selection of extra equipment.
|
|
| ... products without technical information |
| |
|
CNC routers by MultiCam are legendary for their ease-of-use and versatility. Successful companies around the world rely on MultiCam routers to automate production in countless different industries. Whether being used to create intricate 3D architectural moldings and furniture, large-scale outdoor lighted signage or premier-quality acoustic guitars, MultiCam routers work hard to create high-quality and consistent results. To learn more about MultiCam's CNC Router systems click the navigation to the left or an image below.
|
|
The F Series, articulating five axes Machiníng Centres, are designed and built with rigidity, agility and flexibility in mind.
F Series specially feature an extra rigid construction with opposing slide ways on the Z axis and the reinforced cross beam to ensure straightness and squareness precision is maintained even with its extra long Y-V-axes.
|
|
Item No. : NC-0503
Product Name : CNC Router
1) PC based CNC Control.
2) Graphic conversational input function.
3) Powerful vacuum suction table.
4) Variable spindle speed controlled by frequency inverter.
5) Air cylinder counter-balance on z-axis for high machining accuracy.
6) Heavy gauge steel frame of machine is tempered for deformation-free.
7) Linear guide ways on 3 axes.
8) 3 Axes traverses are transmitted by high precision ball screws, and driven by servo motors.
9) The spindle accommodates router bit and shaper cutter.
10) 20,000 rpm high spindle speed.
11) AIR COOLING FOR SPINDLE.
|
|
The B Series is the most robust, precise and productive machine in the complete Muitiax line of CNC Routers.
Designed and built to run 24/7 for the most demanding CNC users in the wood, N/F metals, plastics and composites industries.
The B Series features a heavy duty construction, oversized, to deliver long-iife reliability and consistent high precision.
|
|
|
|
|
|
|
Flexibility and customisation are the key elements in the Arrow routing centres. The machine can be used to process solid wood furniture, kitchen units, office and bedroom furniture, and is mainly destined for use by large and medium industries. Specialisation in specific machining operations, reliability when working with single, large, thick pieces and in nesting operations, these are the main characteristics of the Arrow processing centre. Thanks to its high level of customisation and its versatility the Arrow router machine is suitable to carry out the widest possible range of machining operations, from solid wood door and window frames to all those operations requiring fast panel feed-through rates. Arrow is available with a flat table or with a bar table, interchangeable with two working units and two different types of tool change device. The structure is extremely rigid, comprising a monolithic base and a beam designed to deal with the highest levels of strain and dynamic stress imposed by the machining operations. The machine is offered with a doubled table so as to carry out loading operations during masked time, without slowing down the manufacturing process. The Arrow line uses extremely powerful electrospindles, up to 13.5 kW if air-cooled and 15 kW if liquid-cooled.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
