|
|
| ... products without technical information |
| |
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry |
|
for heavy loads up to 565 tons!
All-purpose and can be combined with different hydr. pumps.
All cylinders comply to the demanding ASME B30.1 standard and are proof tested to 125% of capacity before leaving the factory.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance! |
|
for heavy loads up to 30 tons!
GKS-hydr. jacks for professional applications - worldwide approved and robust design.
- Prominent features like high-quality material, safty cock ('overload protection'), wast-wax cast safety toe, quick release professional connector for external pump and stable swivel professional feet incl. solid professional rubber professional tires.
- Our hydraulic jacks manufacturers approved from a German technical inspection authority and bear German test mark ‚CE'/'GS' and American ‚ANSI/ASME'.
- Every single jacks passes through a sequences of tests before it is delivered and it is supplied with a test report and professional label indicating the date for its next GKS-inspection.
|
|
for heavy loads up to 565 tons!
We are offering high pressure hydraulic tools and equipment like cylinders, pumps, shop equipment, professional bearing maintenance etc.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance! |
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc. |
|
Strip of Sub-Miniature Sockets:
100 x H3155-01 Sockets on polyester strip
Cut/Stackable:
Can be cut to any length
Finish:
Selective Gold (also Gold)
|
|
- No minimum order quantities
- Same day ship on in-stock products |
|
| 2PACK double point double sided industrial presses are the result of a long and fruitful cooperation with our customers. A welded and stress-relieved monobloc frame, a generously dimensioned drive and a long high-precision ram guiding system ensure perfect mechanical operation. The absence of structure below floor level avoids the need for special masonry work, while still providing an ergonomic working height. The tool zone is designed to receive an enormous diversity of tools, especially follow-on tools. |
|
High speed professional presses with dynamic balancing ideal for blanking with manufacturer of carbide tools, particularly designed for the production of laminations and coins.
The eccentric shaft is designed to guarantee a high stiffness to deflection and it is so dimensioned as to assure its unlimited life during the time. |
|
... see all the products in the category
Presses
|
| Compression professional profile that professional seals the joints against wetness and dirt through its pre-tension. V-shaped incision on the surface dictates clearly the folding direction, which creates a clean, harmonic impression over the entire length. |
|
Joint strip
Joint strip is used in expansion joints in accordance
with the materials description in Swedish professional building
regulations Hus AMA 72. It is also used to provide
wind-proofing and a vapour professional barrier.
• EPDM cellular rubber with its established benefits,
i.e. ease of use, resistance to ageing, sealing
ability, etc.
• Does not produce toxic fumes in the event of fire.
• Hollow, soft and elastic – accommodates
movements in joint.
• Made from black EPDM cellular rubber. |
|
| Wide selection of sizes, high thrust capacities and broad range of mounting flexibility. Maximum dynamic thrust capacities range from 125 lbs to 4700 lbs. Strokes in any incremental length up to 60 inches depending on body size. Conform to both NFPA and ISO industry mounting standards. |
|
| The Clampco adjustable diameter clamp provides a larger diametrical adjustment range than standard T-bolt vices. The clamp is available with a standard T-bolt latch or with a saddle quick release latch. Standard band and trunnion materials are 300 series stainless steel. |
|
DESCRIPTION:
This aircraft is equipped with 2 felts assembled on in-depth adjustable plates. It makes it possible to clean and lubricate strip iron before cutting.
FEATURES:
Code 710180:
Width: 180 mm
Maximum thickness: 4 mm
Weight: 8 kg
Code 710300
Width: 300 mm
Maximum thickness: 4 mm
Weight: 15 kg |
|
The MEMOLUB HPS system is an autonomous single/multi point electro-mechanical lubricating. It's high lubricant ejection pressure of 25 bar opens up a new wide range of applications not possible with conventional systems.
MEMOLUB can be used remotely up to 8 meters from the lube point. Remote installation avoids dangerous or difficult access points. Machine stoppage for lubrication can be avoided by using MEMOLUB HPS systems. Combined with progressive distributor blocks, MEMOLUB systems are a simple and economical way of reducing maintenance costs.
MEMOLUB is a refillable lubrication system : simple and easy repleacable cartridge packs are available in three sizes, 120cc, 240cc and 480cc. |
|
| ... products without technical information |
| |
Continuous level measurement over a measuring range of up to 8 meters
The Tower-Sens is a rod detector based on the well-known level gauging system LB 490 Uni-Probe. It has been designed specifically to monitor large measuring ranges.
With only one electronic unit and only one flameproof-housing, the Tower-Sens is significantly more economical than systems comprising several short, cascading detectors. Moreover, the wiring efforts and the risk of complete system failure are drastically reduced.
The combination of good value, reliability, accuracy and low source activity make the Tower-Sens the ideal solution for measuri |
|
Bühler Liquid-level control for external mounting NS 10/...-AM
The control of liquid level in reservoirs, gear boxes or other complex constructions often requires the use of controls than can be mounted externally with a visual indication of level.
The NS 10... range of level controls has been designed specifically for these applications. The visual level indicator is a standard item and has excellent visibility from any direction. The indicator itself is guided in a transparent tube and is moved by the magnetic field of the unsinkable float inside the stand pipe . The electrical contacts or a continuous level transmitter are mounted to the indicator scale. The contacts can be adjusted to any position.
The connection to the main structure can be by means of standard professional pipe fittings or flanges. Contact types MKS-1/W-L-24V are equipped with an LED.
compact dimensions
sight glass does not contain fluid
visual indicator
unsinkable float
infinitely variable adjustment
rugged design
optional continuous analogue signal 4-20 mA |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
