|
|
Automatic bending plant, used with all hydraulic and pneumatic
Hi-tech models.
Complete with automatic ejector. |
|
With its 2160 mm or 2560 mm working length on 2 mm mild steel and 203 mm box height capacity, the RAS folding center is a highlight in flexible sheet metal production. Highly dynamic servo-motors, an ultra fast tool changer, scratch free folding technology and flexible folding beam tools emphasize the RAS MULTIBEND-CENTER's pole position within folding technology.
Using an automated tool clamping system for the upper beam and folding beam, roto-foot corner tools, tab tools and the unique and patented UpDown tools, the MULTIBEND-CENTER folds parts with unmatched design flexibility and accuracy. This allows to produce workpieces with tapered shapes, folds inside the part or offset bends. Distinctive features which make customer parts more versatile and unique.
The MULTIBEND-CENTER is so sophisticated that it will allow to bend an in-credible mix of parts, from the most basic to the most complex. It can process parts in a complex kit production with the same ease as it would run a simple batch production. With its ability to manipulate blanks to 1/1000th degree around a complete 360 degree arc, rectangles and even tapered workpieces can be pro-duce with ease. |
|
UpDownBend folds the part up and down and revolutionizes the entire folding sequence. There is no need any more for the operator to flip the part. This unique folding system reduces cycle times and eliminates the need for a second operator.
The new gauging system automatically adjusts its size to the current folding posi-tion. When parts are small or narrow the table surface area decreases. On large sheets this surface unfolds to its maximum dimension.
The system offers its maximum folding capacity of 4 mm (9 gauge) mild steel on 3200 mm (126") working length with segmented tools as tall as 204 mm (8"). Versatile upper beam tool segments, maximum 150 mm (5.92”) wide with side gripping pockets allow for an easy tool change.
The machine is complete with the revolutionary Touch & More control. The con-trol automatically creates a program, the finished part and the actual bend se-quence all with the touch of the control screen. |
|
Hydraulic 3 rolls plate bending machine, double pre-bending, electronic parallelism.
Bending capacity:
Length: 2000 up to 6000 mm
Thickness: 15 up to 80 mm |
|
Hydraulic 3 rolls plate bending machine, double pre-bending.
Bending capacity:
Length: 2000 up to 4000 mm
Thickness: 4 up to 20 mm
|
|
Bending and Edging Machines -
Quality and Repeatability
For efficient production, high process safety and fully reproducible quality, our bending and edging machines have a proven track record with customers worldwide.
As is the case with any machine built by WEGENER, the bending machine excel with respect to durability, longevity, technological advantage, easy handling and excellent cost/performance ratio. Whether you require the bending of individual pieces or high yolume production, WEGENER offers a model suitable for any application. Two base models and a variety of options allow the tailoring of a machine to your specific needs.
Should your requirements be extraordinary, the modular design and construction permits adaptability to customized solutions. |
|
MBR 1050x1,0mm
MBR 1050x1,5mm
MBR 1050x2,0mm
MBR 1270x1,5mm
MBR 1050x3,0mm
MBR 2050x1,5mm
EBR 1050x1,5mm
EBR 1050X2,2mm
EBR 1050x3,0mm
EBR 1270x1,5mm
EBR 1270x2,5mm
EBR 2050x1,0mm
EBR 2050x1,5mm |
|
The production of elbow parts for air ducts starts with a rollforming proc-ess. This operation seams the blank and creates one part for the lock. In the second step the internal and outside elbow duct cheeks will be rounded on the requested radius.
Traditional rounding machines use one part rolls. Since the part comes with the rollformed seam, traditional rounding machines can offer only some poor and costly compromises. Setting the rolls to the seam thickness results in poor radii. Stronger settings will damage the seam and in the long term also the rolls.
The RAS VENTIrounder for the air duct production rounds sheet metal elbow cheeks with pre-formed Snap Lock or Pittsburgh seams. The result are perfect workpieces without the need of additional spacer parts.
After having moved the rounding rings along the working length and set them to the approximate blank width, you can start rounding the blank. The rings round the sheet metal without touching the seams. Therefore the seams keep their geometry during the rounding process. A gear-brake motor with variable speed can be operated from a single phase outlet. |
|
EB Express Bender
Automated Bending Cell adds to the productivity of your sheet metal working process
In many cases the press brake, the standard technical solution for the bending of sheet metal components, is not only the typical but also the most conventional manufacturing method.
Yet, there are many manufacturing situations where an automated bending cell offers benefits far superior in terms of
total manufacturing cost
component quality
automation level.
FINN-POWER's new EB bending cell is your optimal solution for bending
large components
from thin sheets
in long series
automatically.
With FINN-POWER EB the machine operation cycle is fully automatic and includes the following stages:
loading, rotation during the bending sequence, bending, and unloading. |
|
Automatic bending plant for thin thickness.
Complete of:
- motorized decoiler
- straightening machine
- punching press
- shear machine
- feeding table
- 2 rolls plate bending machine HI-TECH
- automatic ejector |
|
| Grinding machine for corrugated plates, 3 and 4 rolls. |
|
DIMECO range includes more than 80 straighteners for strips from 0,1mm to 10 mm thickness and up to 2000mm wide.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (threading table, lateral guides...).
Maintenance programs are cut thanks to lifelong lubricated bearings (or centralized automatic lubricating system), and to the head crocodile opening for roll cleaning.
DIMECO straighteners own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
All our straigtheners are delivered with adjustable speed feature. When combined with a DIMECO roll feeder, DIMECO straightener speed is automatically tuned to the press rate and to the feeder output.
Also available in combined straightener-feeder machine. |
|
DIMECO FMS "FLEXILINES" integrate cutting-edge technologies into your tailor made manufacturing line.
FLEXILINES provide incomparable flexibility and productivity to industries producing a highly diverse range of models: lighting, white goods, heating, furniture, shelving, building, electrical appliances...
NC PUNCHING: FLEXIPUNCH range uses DIMECO's proprietary multi-step technology, which allows punching of complex patterns from coil. Hydraulic or mechanical press processes strips up to 4mm gauge. Various part models can be chained without any stop or scrap.
FLEXIBLE ROLLFORMING: Roll forming now becomes flexible!. New features like N.C. feeding & width adjustment, cassette holder design make roll forming easy to integrate into F.M.S.
N.C. BENDING: N.C. wing folding stations DIMEFORM moves bending to in-line manufacturing. Fully flexible, it can fold simultaneously 2 or 4 sides of thin metal parts up to 2 m long. |
|
To achieve this, defects such as curvature, camber, torsion, scuff marks and ripples must be removed by the use of levelling machines. Defects result due to coiling in the rolling mill, due to slitting lines or due to the punching process. Depending on the application, these defects have negative effects on further processing.
Special characteristics are:
- Patented EcoPlan® drive system
- Easy-to-clean leveling unit
- Quick-change system for leveling rolls |
|
| ... products without technical information |
| |
|
|
see the results for the following category
