|
|
| ... products without technical information |
| |
Dalmec offer a wide range of manipulators, designed and manufactured for the weightless handling of reels and bobbins.
Simple to use, they allow the operator to move reels quickly, accurately and safely within the operating area.
The type, design, dimensions and picking systems incorporated in these manipulators are tailored to suit the specific requirements of the user and the varying environmental conditions available.
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the float mode control or hands on manipulation, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machines sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
The great versatility of these manipulators, their ease of use, the presence of tailor made configurations to suit every customer%u2019s special requirements, as well as the complete safety against the free fall of the load make of Liftronic Systems a practical and cost effective material handling solution for a great deal of manual handling applications on assembly, packaging and production lines and in every field of industry.
|
|
Pneumatic arm manipulator with pneumatic expander for bobbins.
Thanks to the quick connection of special adaptors, it is possible to handle bobbins with the internal hole from 76 to 200 mm or more.
90 tilting device by pneumatic actuator.
Max capacity 280 kg.
Max work radius 3.7 m.
Max vertical stroke up to 2100 mm.
|
|
| ... products without technical information |
| |
| Hannay Reels provides manual, spring and power rewind cable reels for a variety of industrial applications, including rescue and haz-mat operations, grounds maintenance and repair, video inspection, portable lighting, and broadcast and entertainment industry applications. Hannay also manufactures reels to handle arc welding cable, static grounding cable and electrical cable for power tools, lights, machinery and generators. All Hannay reels can be mounted on walls, ceilings and worktables. |
|
The Tecreel range of self-retracting hose reels provides an efficient means of conveying hydraulic power from fixed to moving points on cranes, lorry mounted cranes, forklift trucks and other materials handling equipment. An integral coil spring ensures that the hoses remain constantly under tension
Maximum operating pressure 300 Bar (4350 Ibf/in)
Large ports provide efficient flow characteristics
Siamese 1/4in, 5/16in, 3/8in or 1/2in bore thermoplastic hoses
Cassette loaded coil spring for safety and easy removal
Left or right hand mounted, easily changeable on site
|
|
Reel with automatic recall by spring. Seal turning double high quality, guaranteed constant passage.
Structure epoxy covered steel. Hydraulic pipe special reel. |
|
Designed to retract the hose with the assistant of an electrical high-torque motor.
We recommend this reel for truck service shop applications where hose and nozzles can be heavy and overhead cranes have to move. |
|
The name for Wichita's ModEvo tension control brake is derived from 'modular' and 'evolutionary', terms that describe it perfectly. Modular - because braking systems to suit diverse tensioning applications can be assembled from a minimal number of modules common to the entire ModEvo range. Evolutionary - because continuous development of new materials, improved design and manufacturing techniques have enabled Wichita to develop ModEvo to match all customers' tension needs at affordable cost
The advantages of the new ModEvo brake lie in the versatility of the modular system, ensuring that the requirements of a wide range of printing and converting unwind tension applications can be met from just a handful of parts common to the ModEvo range. This in turn brings cost benefits, as users can choose just the options they require and add to or upgrade these as their needs change, while carrying a minimum of spare parts.
|
|
... see all the products in the category
Brakes
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The PITSTOP configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output. |
|
DLC 5000 Match Speed Splicer
Standard equipment & features:
Match speed splicer with split arms to load 2 full rolls
Core acceleration and braking by 4 quadrant AC motors
Control and regulation by PLC
Modem for remote diagnositics
Splice pattern straight-across, V or W
Black pasting tabs with photo cell detection
Simultaneous cut & paste under tension
Local push-button panel and WEBVIEW
Simple roll loading directly from floor
Arm automatic positioning
Auto load pre-position and auto chucks
Automatic roll alignment before splicing (aligns on operator side)
Normal and Symmetric arrangement for centre loading
MEGTEC motorized web-up device or provision for press system with web-up assist
Motorized cocking roller adjustment to assist running deformed rolls
Independent frames, no mechanical connection to the press
Fully assembled, pre-wired, pre-piped and tested for easy installation
Splice efficiency data counter
CE compliant
Versions at additional cost:
Remote control panel for sidelay, web tension and brakes
WEBCOM (WEBVIEW + interface for press communication i.e. Ethernet, Profibus, Serial Link)
Integrated DSA Infeed 180daN (for 67" (1700 mm) width) or 210daN (for 82" (2080 mm) width)
Automatic roll-load system/interface
Arm web feedback (splicer sidelay interfaced to web guide)
UL508A certification
6-roll web-over assembly (MEGTEC standard design)
QUALIROLL Paper Management System
Load bearing splicer (press supporting) |
|
| The wide range of standard press feed line equipment we have developed, enables us to offer "turnkey" production lines. Based on this experience we also supply individual pieces of equipment such as decoilers, straighteners, feeders, shearing units, etc. |
|
Decoiler Unwinder for Yarn
Constructed in 5 largenesses with capacity from 1 to 5 tons
Autoregolabile speed from balerino analogic
Screw reducer with built-in limiter
AC motors fed from inverter
Suit of protectors anti industrial accident researches
Vertical, also at call ribaltabile axis of 90
Tiny speed max till 100 meters/
It guarantees an feeding of the yarn without tears |
|
| ... products without technical information |
| |
Widely used in bridge, tank and structural steel work, ship building and other industry where powerful, all-position mechanical jacks are required.
|
|
Lightweight, durable bladder chucks make running large and/or various sized cores quick, easy, and safe.
|
|
| DX type expanding shafts are made of aluminium with an extruded profile or may optionally be made of steel or ERGAL, a special aluminium alloy which allows a 30% approximately increase in the shaft's capacity without increasing its weight. |
|
| ... products without technical information |
| |
| Hannay Reels provides rugged and durable welding reels to protect valuable hose and cable while improving efficiency and safety in arc welding, gas welding and cutting operations. The most prominent include power and manual rewind arc welding reels; dual arc welding reels; portable manual rewind welding reels; narrow-frame gas welding reels; and reels to handle longer lengths of oxygen and gas hose. |
|
Opened drum reel, automatic recall by spring.
With detent pawl (ratchet) for manual blocking of the drum.
Pipe twinned oxygen-acetylene. Center & seal turning brass, 10 bars.
Construction steel with protector paint (blue), high industrial quality, drum assembled on ball bearing.
With guide pipe with rollers to facilitate rolling up and unfolding.
With twinned pipe, fittings & swell of stop assembled on pipe.
Option: swivelling mural fixing code 14/7000-BZ. |
|
| ... products without technical information |
| |
Reeling drum for grounding, earth application
for Ex, Atex, Hazardous Zone with Earth Ex, Atex clip
Payout 5 to 30m
new version with pivot |
|
Reel for earthing of tanker, mobile machine, cart, oil terminal, drum, station gasoline, gas oil station, tank etc
Delivered with pliers of earthing. |
|
MOTORIZED COILER
ART. OE-VE
Mobile handy cable coiler , CE marked, for coils up to 1000mm. Complete with metercounter for cables up to 60mm, electronically controlled variable speed single or three-phase motor , available for delivery with optional extras on demand to get a best performance.
|
|
| ... products without technical information |
| |
APPLICATION Suitable for OPP/Cellophane adhesive tape with auto tabbing.
FEATURES Centralized control panel: All operation controls. For this machine are centralized in a control panel.
Three-step length setting: This length setting provides extremely smooth rewinding operation to gives accurate rewinding length.
Using 4-axis automatic exchange coiling, continuous rolling and enhance efficiency.
Pneumatic brake: Brings the machine to an immediate halt for accurate positioning and labeling.
Automatic labeling device: This operation will be installed in the tail end automatic paper affixed to the machine's largest production capacity.
MAIN TECHNICAL PARAMETERS:
Working Width 1350mm 1000mm
Max. Diameter of rewinding 120mm 120mm
ID. of paper core 76.2mm 25.4-76.2mm
Unwind Diameter 600mm (Max.)
Min. Slitting Width 12mm
Machine Speed 18M/min |
|
APPLICATION Suitable for OPP adhesive tape/glass paper tape.
FEATURES Centralized control panel: All operation controls. For this machine are centralized in a control panel.
Three-step length setting: This length setting provides extremely smooth rewinding operation to gives accurate rewinding length.
Automatic shaft change: Once the rewinding operation is accomplished, the machine will automatically perform shaft changes for convenient and efficient operations.
Crowned stretch Roll: The stretch roll is specially designed to eliminate tape wrinkling during extension and feed.
Pneumatic brake: Brings the machine to an immediate halt for accurate positioning and labeling.
MAIN TECHNICAL PARAMETERS:
Valid width @@1350 mm @@1000 mm
Max. diameter of rewinding @@120 mm @@120 mm
Max. diameter of unwinding @@600 mm @@600 mm
Min. slitting width @@12 mm @@12 mm
Diameter of paper core @@76.2 mm @@25.4-76.2 mm
Slitting machine @@0-180 M/min @@0-180 M/min
Main motor @@5 HP @@5 HP |
|
|
