|
|
• Quality welded frame for maximum strength and stability
• Optimum daylight and bed width
• With hand pump, air or electric driven power source
• Single or double-acting GOLDEN RING DESIGN cylinders
• Standard glycerine filled gauge with dual scale reading in
kN and bar
• Moveable pump table on presses with electric pump
allows for easy side loading for large workpieces
• Height adjustment of lower bed on 25 ton press with a
winch
• Unique “Hydrajust” bed positioning device on 50, 100 and
200 ton press with doube-acting cylinder allows
adjustment of the lower bed |
|
- Pullers/ spreading wedge/ nut
- Spliters/ workshop presses
|
|
Type WSP 60
Capacity 60 ton
Stroke 400 mm
Power 3 kW
Voltage 400/3~
Frequency 50/60
Delievery flow(Lt/min) 3,3/13,5
Oil tank capacity (dm)* 20
*(Tellers 46)
Pressing speed 4 mm/s
Approaching speed 9,2 mm/s
Return speed 12,6 mm/s
Pressing force 588 (KN)
Pressure max. 235 (bar)
Weight 685kg |
|
Hydraulic Press for Bending, Blanking and Dies
strong hydraulic cylinder and two heavy-duty circular guides ensure uniform and precise feeding during press operation
also suitable as try-out press
ram plate and large work table with T-slots for tool clamping
firmly bolted work table
adjustable end stop |
|
... see all the products in the category
Presses
|
INTERTEC cabinets and shelters are designed as sandwich constructions with inner and outer skins made from very strong GRP skins - or other materials such as aluminium sheet or stainless steel - and a core of closed cell light weight and insulating PU foam. This construction ensures high strength and rigidity and is unaffected by environmental influences.
The design spectrum covers nearly every application case, from an insulated cable distribution cabinet through Analyser House or Radar Equipment Shelter to a complete - even multi-storey - utility building with attached office. Whether in aggressive industrial atmosphere or extreme environmental conditions of the arctic or the desert - there are nearly no limits.
|
|
CR SERIES
Intended for secondary distribution on construction sites, for the different areas of the construction trade and for dispatching power to different floors of buildings being constructed or renovated. |
|
AS SERIES
Control panels designed for larger construction sites. The ASI series is particularly well suited to industrial construction sites: 400V neutral-free three-phase network. |
|
| ... products without technical information |
| |
It's not surprising that users and manufacturers of construction machinery prefer DEUTZ diesel engines. Not only are they compact and extremely quiet, but they also feature a wide choice of integrated auxiliary power take-offs. The legendary durability and reliability of our proven engines are world renowned. So is the high degree of economy they offer by keeping maintenance and operating costs down. This is achieved by long service intervals, low fuel consumption, and easy access to all service points.
|
|
When our construction customers said that they wanted smaller, quieter, more powerful engines for micro and mini designs we brought them 400 Series. The range has been specifically tailored to micro / mini-excavators, skid steer applications, and the smaller sized dump trucks. For the top end of these smaller machines the 800 Series brings the same refinement, but adds more power.
The 1100 Series family of engines provides an engine platform that caters for different emissions legislation in world markets. The 1100A is suitable in non-regulated markets, the 1100D for Tier 3 / Stage IIIA legislation, and the 1100C range satisfying Tier 2 / Stage II. This approach makes life much simpler for manufacturers who wish to sell globally without spiralling re-engineering costs.
1100 Series contains models that can be tailored to Telehandlers, Large dumper trucks, Backhoe loaders and Wheeled or tracked excavators. Similar envelope size, mounting points, fuel, coolant, electrical and gaseous connection positions means a more efficient, lower cost design and installation process for equipment manufacturers. All the important end user benefits of improved NVH, cost of ownership, and productivity are maintained. |
|
* QST30 Powers the biggest construction equipment, and tackles the biggest jobs. Advanced electronics deliver exceptional performance and durability with low maintenance and operating costs. Ratings range from 1200-1500 hp.
* QSK23 Whether you are powering new equipment or repowering an excavator, loader or road paver, the QSK23 delivers high performance and long-range durability with low maintenance and operational costs, every day. Ratings range from 760 to 950 hp.
* QSK19 These powerful engines with state-of-the-art electronics are designed to give every bulldozer, grader and excavator maximum performance with minimum maintenance. Ratings range from 525 to 800 hp.
* QSX The unique dual overhead cam design of the QSX allows the engineers at Cummins to optimize combustion efficiency. Ratings range from 350-660 hp.
* QSL With a torque rise of up to 50% and a peak torque of 1150 lb-ft., the QSL handles the toughest loads and the roughest work conditions. A High-Pressure Common Rail (HPCR) fuel system helps deliver better fuel economy, with better cold starting capability and a 50% reduction in noise output. Ratings range from 280-350 hp.
* QSC Makes every construction zone a more efficient work zone. A High-Pressure Common Rail (HPCR) fuel system delivers for performance at every rpm, while quieter operation (up to 50% less noise) improves communications and operator comfort. Ratings range from 240-340 hp.
* QSB When your equipment has to handle a wide range of operating conditions and load factors, you need the precision and flexibility of full-authority electronic controls. Cummins 4-cylinder and 6-cylinder QSB engines make every piece of equipment work harder, longer and better. Ratings range from 110-275 hp.
* C8.3 The C8.3 with mechanical fuel injection is one of the most versatile and successful engines in every kind of construction equipment, in use everywhere around the globe. Ratings are available from 185-260 hp.
* B Series Our mechanical B series engines are small enough to fit the equipment but big enough to handle the job. Three different models are available, the four-cylinder B3.9 and B4.5 plus the 6-cylinder B5.9. Ratings range from 110-173 hp.
* B3.3 From forklifts to compactors to skidsteers, Cummins B3.3 engine brings toughness and reliability to every piece of equipment. Its in-line 4-cylinder design has a compact footprint for easy installation. Ratings range from 60-85 hp, with mechanical fuel injection and a choice of naturally aspirated or turbocharged versions.
* A Series From portable lighting to power generators to air compressors, Cummins A Series engines work round-the-clock and never take a break. These compact 3- and 4-cylinder diesels deliver strong performance with a minimum of maintenance. 5 models are available, with ratings ranging from 31-60 hp. |
|
| Stainless Steel rod end with injection-molded, reinforced nylon race. Low maintenance, self-lubricating and moisture resistant for versatility. Stainless steel ball, body and optional stud are suited for many applications requiring high wear and corrosion resistance such as marine, recreational, construction and trucks/off highway vehicles. |
|
| 3 piece stainless steel and steel varieties with optional PTFE liner. Used mainly for precision motion control applications such as performance racing, automotive and specialized industrial equipment. |
|
The Safety Net Fan is available as a Fall Arrest, Fall Protection or Street Protection Fan.
- Fall Arrest Fan: The Fall Arrest Safety Net Fans allows for falls of up to 6 metres.
- Protection Fan: Designed as a catch net for falling objects and debris.
- Street Protection Fan: To provide pedestrians protection from falling objects. |
|
Nets per square meter
Standard Protective nets: 5 m width
|
|
| ... products without technical information |
| |
- Hanging Platform: Creates a working platform around the edge of roofs and structures.
- Cantilever Platform: Used to provide a working platform and walk way around wall forms and partition walls. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Two-storey office
Office below platform
Modular structure: 4 m x 4 m, 6 m x 4 m, 8 m x 4 m
Cover trim on each panel joint providing cable run
Easy installation
Delivered as kit or installed by us
|
|
| ... products without technical information |
| |
THE DISPLAY SYSTEM MODUL 5200 -
flexible furnishing, flexible display
MODUL 5200
new tasks, new procedures, changing forms of organisation and the use of electronic media have completely transformed the professional office landscape as well as the office in the home.
mobility and flexibility are therefore the two most important requirements for the culture of work in the future
these were the considerations which gave rise to the MODUL 5200, the variable display and furnishing system for offices and shops as well as the home.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category