|
|
Calibration Hand Pumps (Pressure & Vacuum)
Types 2911, 2941, LPP 30, LPP 700 and LPP 1000
LPP 30:
Pneumatic up to 35 bar, switcheable to vacuum -0.95 bar
LPP 700 and LPP 1000:
Hydraulic up to 700 resp. 1000 bar
Together with our electronic pressure calibrators you get a "calibration laboratory" in a case.
All Calibration Handpumps supplied with test tube.
|
|
For comparison calibration of pressure measuring instruments, in the field, but also in workshops and laboratories.
The LPP-KITs consists of a pressure/vacuum source (calibration hand pump LPP 30) and a high precision reference pressure measuring instrument, supplied in a carrying case.
There are several types and models with different accuracies, ranges and features available, see datasheet.
For higher pressure ranges the LPP-Kit comes with the hydraulic calibration handpump LPP 700 or LPP 1000 (up to 1000 bar / 14500 psi)
|
|
|
The Diaphragm Comparator is a versatile control circuit component for both fluidic and pneumatic signal levels. The comparator performs many functions including those of an analog pressure comparator, an analog pressure repeater and a digital signal isolator. Maximum pressure is 25 PSI.
|
|
The Fast, Portable, Low Cost, Easy-to-Operate, Gauge Calibration Solution.
- self contained precision hydraulic pressure comparator for the calibration of pressure gauges rated up to 700 bar or 10,000 PSI
- with a simple turn of the handle, it takes less than ten minutes with 5 to 10 test points
- comparator can be filled with water, oil or isopropyl alcohol allowing for clean and safe calibration of almost any type of gauge
- can be used without fluid and FastCalXP 2.0 to calibrate DP transmitters to 300 inches of H2O
- faster to use than a deadweight tester or an automated pressure controllers but costs much less
- ideal to calibrate low cost gauges that are overlooked for ISO9000 compliance
- can be bench mounted
- light weight, compact and portable
- unique design eliminates damage to mechanical pressure gauges
Pressure is Our Business!
|
|
|
From small pneumatic 'bicycle' type pumps to a hydraulic pump that generates up to 15,000 psi (1,000 bar). These are durable pumps with features such as vernier valves, vent valves, manifold connections and swivel fittings, making the pumps ready for your calibration applications.
|
|
Beamex's calibration accessories complete your investment into calibration equipment. Utilizing calibration accessories means an ability to extend configuration possibilities. For instance, by using the external pressure modules you are able to calibrate a wide pressure range with one calibrator.
|
|
Scandura has a complete line of pressure/vacuum generators
PNEUMATIC LINE:
- series BA, vacuum up to 7 bar
- series GPP, vacuum up to 40 bar
HYDRAULIC LINE :
- field use: GHM series, ranges up to 300, 400 e 700 bar
- lab use: GHH, series, ranges up to 700 bar
Scandura’s BA series Pressure Generators play their role at the optimum level.
Its high performances are associated with an excellent price to performance ratio, including long terms performance stability and operating reliability as the market leaders only can ensure.
For large quantity supplies Original Equipment Manufacture (OEM) Agreements are possible with any Distributor/Provider of and Maintenance Process Control Equipment
What are you waiting for, surf in our web-site, visiting the incredible Scandura world!
|
|
|
|
|
|
HTP1 Pressure Test System
1000 bar, 15 000 psi Hydraulic Pressure (compatible with most fluid media) HTP1-700 and HTP1-1000 are lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi. HTP1 is well suited for calibrating pressure transmitters, pressure transducers, pressure switches and pressure gauges.
Features & Benefits:
Hydraulic Pressure up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi!
Sealed Construction - NO LEAKS ! NO RUST !
Lightweight, hand held and easy to use.
Optional over pressure protection system (via adjustable relief valve)
Quick priming and pressure generation using scissor action pump.
High pressure / priming selector.
Fine adjustment control.
Pressure release valve.
Large see-through reservoir with a capacity of over 100cc.
Compatible with many different liquids. e.g. mineral oil, distilled water. ('Skydrol' / Brake fluid option also available).
Optional accessories include a carrying case, a set of adaptors and a flexible hose with quick fit connectors suitable for many applications.
|
|
|
|
|
|
The hand pump with fine adjustment is a pneumatic compression device for a pressure output from 0 to 16 bar and is operable by hand.
The hand pump is especially suitable to check or to calibrate pressure measuring instruments, as for example load cells, pressure sensors and gauges. The pump is portable because of its compact construction and is to serve handily and easily. A fine automatic controller at the pump enables a fine regulation of the pressure output. The pressure pump was developed for a fast and simple pressure calibration.
The hand pump consists of a cylinder, a piston, a pressure release valve, a fine adjustment and the handles. Over the two available internal threads the pump can be attached to the test normal and the test sample, in order to check or calibrate. The handles have to be pressed and released by hand a few times. As result an initial pressure within an area from 0 to 16 bar or -780 to 0 mbar is produced.
Connect test normal and the instrument which is supposed to be calibrated with the pump by using the flexible hose and the supplied connections. During inflating you close the opening valve in clockwise direction. For pressure relief you turn the opening valve against clockwise direction. Before the calibration of the pressure measuring device each connection should be checked for tightness. After the calibration make sure that the pressure is relieved before unscrewing the instrument (otherwise danger of injury exists).
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :