|
|
Hydraulic pressure source for pressure calibration:
Pressure Comparison pump (spindle pump) LSP
for comparison pressure calibration
Pressure generation up to 1000 bar / 14500 PSI
Two pressure ports (1 x for reference unit, 1 x for test item)
Generates pressure up to 1000 bar with very few force. Fine adjustable.
Other availavel ranges (LSP): 1600 bar, 5000 bar and 7000 bar.
|
|
Calibration Hand Pumps (Pressure & Vacuum)
Types 2911, 2941, LPP 30, LPP 700 and LPP 1000
LPP 30:
Pneumatic up to 35 bar, switcheable to vacuum -0.95 bar
LPP 700 and LPP 1000:
Hydraulic up to 700 resp. 1000 bar
Together with our electronic pressure calibrators you get a "calibration laboratory" in a case.
All Calibration Handpumps supplied with test tube.
|
|
For comparison calibration of pressure measuring instruments, in the field, but also in workshops and laboratories.
The LPP-KITs consists of a pressure/vacuum source (calibration hand pump LPP 30) and a high precision reference pressure measuring instrument, supplied in a carrying case.
There are several types and models with different accuracies, ranges and features available, see datasheet.
For higher pressure ranges the LPP-Kit comes with the hydraulic calibration handpump LPP 700 or LPP 1000 (up to 1000 bar / 14500 psi)
|
|
Electronic Pressure Calibrator as precision reference instrument for pressure comparison calibration purposes:
Ranges: mbar-ranges up to +4000 bar
Gauge Pressure, Absolute Pressure, Vacuum
Accuracy up to ±0.025% FS
For portable or stationary use.
- Type LDM70-K50: Accuracy ±0.5% FS
- Type LDM70-E25: Accuracy ±0.25% FS
- Type TLDMM-A02: Accuracy ±0.2% FS
- Type TLDMM-A01: Accuracy ±0.1% FS
- Type TLDMM: Accuracy ±0.05% FS
- Type LPC 300: Accuracy ±0.025% FS
- Type LPC 200: Accuracy ±0.025% FS or 0.1% of reading
- Type PC4: lowl presure (mbar-ranges)
|
|
Applications:
- National institutes and institutions
- Research and development laboratories
- Industry (laboratory, workshop and production)
- Calibration service companies
Special Features:
- Up to 4 sensors can be integrated
- Pressure ranges: from 0 ... 100 mbar to 0 ... 2500 bar
- Total uncertainty of measurement: 0.025 % ... 0.008 % (certified)
- Over pressure safety (up to 400 bar)
- Easy retrofitting
Remarks:
- modular up to 4 Sensors (different types)
- can be easily retrofitted (module concept)
- optional with barometric reference
- calibration software EasyCal available
|
|
|
The Diaphragm Comparator is a versatile control circuit component for both fluidic and pneumatic signal levels. The comparator performs many functions including those of an analog pressure comparator, an analog pressure repeater and a digital signal isolator. Maximum pressure is 25 PSI.
|
|
Newton is the new Scandura solution for the calibration of pressure and electric devices: transmitters, pressure switches, recorders, controller, manometers, indicators, positioner and converters.
The main features are:
- pressure ranges from -900 mbar up to 700 bar.
- vacuum and pressure generation up to 21 bar
– two channels for the electrical signals
– frequency measurement
– 24 V d.c. to feed the transmitter
– interface to PC through RS-232
– 3 readout visualization
– error calculation
– data storage
– selectable engineering units
– logging function
|
|
MEP, the Scandura electric-pneumatic handheld calibrator, it’s now available with the display embedded. The wide display allows simultaneously to visualise the:
reference pressure value and the related measurement units
transmitter’s output during a calibration (0 ÷ 25 mA)
voltage input signal (0 ÷ 30 V d.c. )
switch status (ON – OFF)
and it can feed also a current loop at 24 Vcc.
Connecting a PDA (with as PalmOS™ sw) to the instrument, by the serial interface, it’s possible to manage the complete calibration cycle till the printing of the reports.
The required software to manage the PDA is supplied into the standard package of the instrument.
Alternatively to the PDA, the device can be connected to a PC by a serial interface unit, so that every terminal can be used. Ranges from 60 mbar up to 700 bar.
|
|
The Fast, Portable, Low Cost, Easy-to-Operate, Gauge Calibration Solution.
- self contained precision hydraulic pressure comparator for the calibration of pressure gauges rated up to 700 bar or 10,000 PSI
- with a simple turn of the handle, it takes less than ten minutes with 5 to 10 test points
- comparator can be filled with water, oil or isopropyl alcohol allowing for clean and safe calibration of almost any type of gauge
- can be used without fluid and FastCalXP 2.0 to calibrate DP transmitters to 300 inches of H2O
- faster to use than a deadweight tester or an automated pressure controllers but costs much less
- ideal to calibrate low cost gauges that are overlooked for ISO9000 compliance
- can be bench mounted
- light weight, compact and portable
- unique design eliminates damage to mechanical pressure gauges
Pressure is Our Business!
|
|
Why carry a toolbox of gauges and modules? When a Crystal 30 series calibrator can do the whole job!
- small enough to fit in your shirt pocket, everything is built in
- aluminum case and stainless steel sensors make it very tough
- gas or liquid compatible
- Calibrate to full vacuum and high pressure up to 5000 PSI (300 bar)
- accuracy of 0.05% of reading, laboratory accuracy to outdoor field conditions
- calibrated in an environment chamber, duplicating field conditions
- intrinsically safe:
CSA: Exia, Class I, Division 1, Groups A, B, C, D, T4
ATEX: II 2 G EEx ia IIC T4
- 9V battery provides 90 hrs of operation
Pressure is Our Business!
|
|
Intrinsically Safe Pressure Calibrator 718Ex
- Built-in pressure/vacuum hand pump, with vernier and bleed valve, Pressure measurement to 0.05% of full span, using an internal pressure sensor, Pressure measurement to 200 bar using any of the 8 intrinsically safe 700PEx Pressure Modules, Wide range of selectable measurement units for pressure, Pressure switch test funktion, Min/Max hold functions
Also available as a standard non-Ex unit!
Intrinsically Safe Pressure Module 700PEx
To measure a wide range of pressure in an explosive endangered area the range of pressure modules is extended with 8 ATEX compliant modes. These models are compatible with the ecom 718Ex intrinsically safe pressure calibrator and the intrinsically safe multifunction process calibrator 725Ex.
Also available as a standard non-Ex unit!
|
|
|
The FlowAnalyser PF-300, PF-301 VAC & PF-302 LOW are highly accurate testing devices, which bi-directionally measure flow, pressure, temperature, humidity and O2 concentrations.
|
|
JOFRA DPC-500 PRESSURE CALIBRATOR
Portable and still efficient like a laboratory instrument
With the high resolution, compact JOFRA DPC-500 documenting pressure calibrator new standards are reached within pressure calibration. Designed for high precision calibration of pressure instruments such as pressure gauges, transmitters, digital manometers, pressure switches and overpressure valves, the DPC-500 offers improved pressure accuracy (± 0.025% FS), better electrical current (± 1.6 ìA) and voltage (± 0.5 mV) accuracy and an extended pressure range of 250 mbar to 1000 bar FS. The DPC-500 also offers absolute pressure measurement from 0.4 to 16 bar absolute.
|
|
CrystalCalXP is a calibration lab in a box! This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester. It eliminates typing and reduces calculation errors. It is specified at 0.1% of Reading accuracy up to 10000 PSI (700 bar) when using Crystal's XP2i digital pressure gauge as reference or at 0.05% of Reading accuracy up to 5000 PSI (300 bar) when using Crystal's 30 Series calibrator as reference. It has an easy to use wizard-based setup. It comes with a weather-proof rolling case that can be used as a portable bench. Weighs just 16 kg/35 lbs.
Watch demo at www.crystalengineering.net/fastcalxp
|
|
PASCAL LAB – P, touch-screen high accuracy pressure calibrator for lab applications:
- modular configuration: up to 4 internal pressure sensor
- connector for external sensors
- uncertainty up to 0,01% f.s.
- ranges: vacuum up to 1000 bar
- display touch-screen with 4 variables simultaneously indicated
- huge memory, bi-direction and real-time communication to PC
- large memory storage for the calibration procedures, data and reports
|
|
|
From small pneumatic 'bicycle' type pumps to a hydraulic pump that generates up to 15,000 psi (1,000 bar). These are durable pumps with features such as vernier valves, vent valves, manifold connections and swivel fittings, making the pumps ready for your calibration applications.
|
|
Beamex's calibration accessories complete your investment into calibration equipment. Utilizing calibration accessories means an ability to extend configuration possibilities. For instance, by using the external pressure modules you are able to calibrate a wide pressure range with one calibrator.
|
|
Scandura has a complete line of pressure/vacuum generators
PNEUMATIC LINE:
- series BA, vacuum up to 7 bar
- series GPP, vacuum up to 40 bar
HYDRAULIC LINE :
- field use: GHM series, ranges up to 300, 400 e 700 bar
- lab use: GHH, series, ranges up to 700 bar
Scandura’s BA series Pressure Generators play their role at the optimum level.
Its high performances are associated with an excellent price to performance ratio, including long terms performance stability and operating reliability as the market leaders only can ensure.
For large quantity supplies Original Equipment Manufacture (OEM) Agreements are possible with any Distributor/Provider of and Maintenance Process Control Equipment
What are you waiting for, surf in our web-site, visiting the incredible Scandura world!
|
|
Primary standards - Pneumatic deadweight testers - Hydraulic deadweight testers - Digital pressure calibrators -Dial gauge comparators - Digital handheld test systems - Pneumatic and hydraulic pumps
Convenient electronic systems ranging from -1 to 700 bar (25 inHg to 10,000 psi) - multiple choices of pressure ranges, pumps, and accuracies, fully temperature- compensated for problem-free and accurate field use.
|
|
Introduction
Beamex's range of portable MC-calibrators for field calibration is known for their accuracy, versatility and also for meeting both high and uncompromised quality standards. Accuracy is assured when you decide to buy any of Beamex's portable MC-calibrators, because they all come with a traceable, accredited calibration certificate.
Benefit from using Beamex calibrators:
* Very high accuracy
* Simple to use
* All-in-one functionality
* Robust casing
* Customization possibilities
* Extensive after-sales services
|
|
|
The CP 400 /420 Dual Sensor Pressure Calibrator provides unmatched pressure measurement flexibility with 0.025%FS accuracy on both internal,isolated,stainless steel pressure sensors. An external pressure module connection supports all BetaPort -P pressure modules for even greater measurement capability. A Pt100 RTD input is provided for temperature measurements accurate to 0.1°C (0.2 °F).In addition,the CP 400 /420 measures 4-20 mA loop current and up to 30 VDC.
|
|
MEP-DC, the SCANDURA portable pressure calibrator, is the perfect solution for the calibration of every pressure device: transducers, manometers, transmitters, converters and switches.
The main features of this calibrator are:
• display of the reference pressure value and the related measurement unit
• maximum pressure value during the measurement process
• leakage indication in a pressure circuit
• current an voltage measurement
• switch status indication
• vacuum and pressure generation up to 21 bar
MEP-DC can feed a supply loop at 24 V d.c. Through a PDA (with a PalmOS™ sw) it manages the complete calibration cycle till the printing of the reports.
|
|
We help you, if you are under pressure!
A suitable pressure calibrator for any application
Pneumatic and hydraulic pressure calibrators of series PM... and PC... distinguish themselves especially by high accuracy of measurement and compact type of construction.
The calibrators are used in the field or laboratory, production and service for inspection or calibration of pressure sensors,
gauges, pressure switches and by-pass valves. Reference pressures of -1 up to 700 bar can be generated in a fast and simple way.
|
|
Portable calibration device KAL 100/200with integrated pressure generator. Measurement ranges from 0 - 100 Pa to 0 - 100 kPa.
Combination pressure transducer and pressure gauge. The desired pressure is set by digital input. No need to connect to an external pressure generator
The KAL 100/200 calibration device, a combination pressure transducer and pressure gauge, can be used to test and calibrate pressure sensors and other low-pressure gauges.
The desired pressure is set by digital input, and pressure is generated quickly and precisely through the use of a closed loop, thereby eliminating the need for an external pressure generator.
With RS 232 serial interface. Easy-to-operate calibration device
with an excellent price/performance ratio.Medium: Air, all inert gases
|
|
|
The FlowAnalyser PF-300, PF-301 VAC & PF-302 LOW are highly accurate testing devices, which bi-directionally measure flow, pressure, temperature, humidity and O2 concentrations.
|
|
A Pitot Static tester is a pressure generator and pressure measurement instrument which can simulate altitude and speed of aircraft on-board equipments.
Flying conditions need to be simulated on on-board equipments when they are manufactured, repaired, or integrated to the aircraft.
ATEQ-OMICRON has developed two kinds of Pitot Static testers:
• For workshop to test on-board instruments when they are manufactured, repaired or calibrated.
• For hangar or tarmac to verify instrument directly on aircraft.
|
|
Digital pressure calibrator HM38
Two individual pressure measuring ranges for gauge, vacuum and differential or absolute pressure
Measuring media: instrument air, inert gases, media compatible sensors available for aggressive / fluid media
11 different selectable measuring units
Datalogging function and RS 232 interface
To measure and generate simultaneously current and voltage
Leak rate, record, ramp, deviation, simulation and trigger function
Incl. free of charge SCS certificate
|
|
Model : HCK
Calibration : 70...700 bar
Other features : available with PC6 PRO
|
|
Model : PCK
Calibration : -1...35 bar
Other features : available with PC6 PRO
|
|
Pneumatic calibrator PK with panel manometer PM
Panel Manometer PM
Electronic and Pneumatic Calibration and Control System
Portable simulation and measurement unit (PK) (can be installed into a 19" laboratory system)
Gauge and vacuum can be generated and regulated with the pneumatic unit
Easy exchangeable measurement range (PM22, PM28)
Measuring media: instrument air, inert gases, media compatible sensors available for aggressive /fluid media
12 different selectable measuring units
Hold function
Datalogging function and RS 232 interface
Measurement for leak rate and tendency
Minimum /maximum values
Incl. free of charge SCS certificate
|
|
|
|