|
|
Hazardous Location Differential Pressure Gauges
Hazardous location differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications, they are a low cost alternative to bourdon tube and bellows designs.
These hazardous location differential pressure instruments are used in environments containing hazardous vapors, gases or particulates. The switches and electrical connections are housed in special UL, CSA, FM and ATEX approved enclosures. The cast aluminum housings have two mounting lugs, a 3/4" NPT electrical conduit port, and meet the following specifications: Class 1, Gr. B, C, & D; Class II, Gr., E, F, & G; and Class III. They also meet NEMA 3, 4X, 7, 9, & 12 specifications.
|
|
|
|
|
|
DIAL SIZE
1½”, 2", 2½”, 4"
Liquid Fillable Gauges P-1550 Series
Overview
Series 1550 liquid filled gauges combine low cost and high accuracy with a rugged stainless steel case and brass internals for corrosive and high vibration environments.
Typical applications include: pumps, compressors, HVAC, petrochemical
processing, and power generation.
Series 1550 gauges are available in stem (Model 1555 & 1559) or panel mount (Model 1558) configurations with brass socket; phosphor bronze Bourdon tubes are supplied to meet specific customer requirements.
Series 1550 gauges come in 18 vacuum, compound, and gauge pressure ranges (see specifications). Glycerin is standard fill fluid, with silicone or mineral oil available on request. Dry (unfilled) gauges can also be supplied, off-theshelf, by your local stocking U.S. Gauge distributor.
SPECIFICATIONS
DIAL SIZE
1½", 2", 2½", 4"
RANGES
Vacuum 30"-0 Hg VAC (counterclockwise rotation with increasing vacuum) Compound: 30" Hg VAC 0, 15, 30, 60, 100 psi Gauge: 0-15, 30, 60, 100, 160, 200, 300, 600, 1000, 1500, 2000, 3000, 6000 psi ACCURACY: ±1.6% FS
LIQUID FILL
Glycerin is standard but silicone and mineral oil are available. Dry (unfilled) gauges are available as off-the-shelf stock through local distributors
|
|
|
Micro-pressure gauges are used to measure inert gases in the gauge, vacuum and differential pressure domain. These instruments have high measuring sensitivity and resolution (scale length up to 4000 mm). With the aid of the mirror ring and knife-edge pointer, measured values can be read accurately and free from parallax error. The micro-pressure gauges can be built into control panels.
|
|
|
|
|
|
XR81 Series
AMETEK's XR-Series All-welded Gauge and Seal offers customers a lower cost alternative to an individual gauge and diaphragm seal with the added benefit of a reduction in potential leaks. Our high quality, rugged SOLFRUNT® 1981 (SST internals) SOLFRUNT® 1986 (Monel® internals), gauge are mounted and welded onto our M&G XR Diaphragm
1500 Series
The Models 1530 and 1535 are feature ±1% of span accuracy and utilize 300 series stainless steel case. These heavy duty 2", 2-1/2" and 3-1/2" pressure gauges are specifically designed to withstand the corrosive atmospheres, such as salt air, sour gas, and other industrial gases
1900 Series SOLFRUNT®
SOLFRUNT gauge cases feature an integral wall between the measuring element and the window, and a pressure relieving back for increased safety. They are available in various styles, case materials, and mounting arrangements, and wetted parts are available in bronze, stainless steel, and MONEL®.
508/1409 Series Portable Test Gauges
U.S. Gauge 3" test gauges combine high accuracy, rugged construction and portability for a wide range of field and production testing applications. Instruments are available in chrome plated brass Series 508 and chrome plated ABS Series 1409 case designs
659 Series SOLFRUNT®
When safety is your top priority, AMETEK U.S. The Model 659 provides users with a solid-front and pressure-relieving back design in all stainless steel construction
|
|
Square Gauges
Axial 1/8" ABS 0 - 2,5 40 x 40 360A770
Axial 1/8" ABS 0 - 16 40 x 40 360A774
Round Gauges
Axial 1/8" ABS 0 - 10 Diam. 25 880A114
Axial 1/4" ABS 0 - 16 Diam. 50 880A325
Gauges for panel mounting
Axial 1/8" Steel 0 - 10 Diam. 40 880C214
Axial 1/4" Steel 0 - 25 Diam. 63 880C426
Round Vacuum Gauges
Axial 1/8" ABS Vacuum Diam. 50 880A319
Axial 1/4" Steel Vacuum Diam. 63 880B429
|
|
General Service Gauge
Dial Sizes: 1-1/2", 2", 2-1/2", 3-1/2" & 4-1/2"
Superb quality, economical price
Pressure ranges to 5000 psi
Marsh Instruments General Service Steel Case Gauges are an economical, general purpose gauge for pressure measurement from vacuum/compound through 5,000 psi. Suited for use with water, oil, air, gas, or other non-corrosive media.
Typical applications include FRLs, compressors, pumps, boilers, regulators, dryers as well as commercial and industrial equipment
|
|
Properties:
Design ==> Positive pressure measuring range without glycerine filling Connection ==> Bottom connection
Connection 1 ==> BSP cylindrical outer thread
Seal type ==> flat seal with pin Notes
|
|
Swagelok Pressure Gauges
Swagelok gauges provide accurate pressure measurement for industrial and ultrahigh-purity applications. They are offered in a wide range of pressure ranges, dial sizes, connections, mountings, and options to support a wide range of customer requirements.
|
|
Bourdon tube pressure gauges for refrigerants MAN-T
All Stainless Steel Pressure Gauges MAN-R
All St. St. Pressure Gauges with analogue output MAN-Z
Differential Pressure Gauge MAN-D
Digital Pressure Gauge MAN-SD/-LD
Digital Pressure Gauge PDC
Digital Pressure Gauge MAN-SF
Diaphragm Seal
Bourdon Tube Test Pressure Gauges MAN-F
Capsule Element Pressure Gauges MAN-K
Accessories for Pressure Gauges
Diaphragm Pressure Gauges MAN-P
Pressure Gauges for paper industry MAN-RF..D
Bourdon Tube Pressure Gauges MAN-R
Contact options for manometers
Options for Pressure Gauges
Hand-Held Pressure Gauge HND-P
|
|
Pressure gauges in our standard range. Nominal sizes ND 80 und ND 100; connection position bottom, radial or back, central.
Pressure gauges of the comprehensive standard can be used in all applications where liquid and gaseous media are not highly viscous or do not attack copper alloys or crystallize.
All standard pressure gauges comply with general international recommendations for measuring systems and take requirements for specific applications and technical standards into consideration (EN 837-1). The rear central connection enables simple conversion to the panel mounted version.
|
|
- Accuracy: ±1.6% of full scale
- Dimension: ø4"
- Operating Temperature: -10 to 60°C
- Over Pressure: 120* full scale
- Process Connections: 1/2" NPT Male, standard
- Connection Material: SS316L
- Micro switch type
|
|
Description & Features:
• Solid front blowout back for the ultimate in gauge safety
• Full rotary movement and micrometer pointer for ease in calibration
• Stainless steel
• Safety glass lens
• CRN registered
• 5 year warranty
Applications:
• Used where operator safety is a must
|
|
● Instrument Connection: female thread 1/4" to 1/2" BSP or NPT
● Process Connection: 1",1½",2"(ISO2852); 25,32,40,50(DIN32676)
● Temperature Limited: -40~+150ºC
● Pressure Range Limited: (for pressure gauge)
● Material: Body-SS316(standard), option:SS316L, Hastelloy C276, and others available on request
● Membrane: SS316L(standard), options-Hastelloy C276, tantalum and others on request
|
|
The Ashcroft® PLUS!™ Performance option, a revolutionary method of dampening the effects of pulsation and vibration, is now available on Ashcroft® sanitary gauges.
PLUS!™ Performance provides the benefits of liquid fill in a dry gauge. Gauges with this remarkable feature offer the resistance to vibration and pulsation formerly available only in costly liquid-filled gauges.
PLUS!™ Performance is unique to Ashcroft gauges and is patent pending. It extends the life of your dry gauge by 50%, lessening the amount of time and money you spend replacing gauges. The feature keeps pointers steady for superior readability. It eliminates all the problems associated with liquid-filled gauges such as leakage and reduces shipping costs. The PLUS!™ option is available on all ranges, including vacuum, and is currently being offered on gauges with a 2 1/2", 3 1/2" and 4 1/2" dial size.
Fast shipping within 5 working days is available with Gold Service(SM) delivery.
|
|
Description & Features:
• ±0.75% full scale accuracy
• Built to withstand the harshest of sanitary applications
• Food grade glycerin filling standard
• Re-zero feature standard
• Crack/breakage-resistant polycarbonate lens standard
• Clean-In-Place design
• Steam-In-Place design
• Autoclavable
• CRN registered
• 5 year warranty
Applications:
• Demanding pharmaceutical applications requiring strict sanitary instrumentation features and 3A approval
|
|
KL 100_417 2008/ 01 E
Application:
Suitable for corrosive enviroments and gaseous or liquid media that will not obstruct the pressure system. With liquid filled case for applications with high dynamic pressure pulsations or vibrations.
Suitable for chemical industry, petro-chemical industry, mining industry, mechanical engineering, enviromental technology and plant construction.
|
|
Models-631,632,633,634.
Stainless Steel Case & Stainless Steel Internals
Case
AISI 304 Stainless Steel
Bezel Stainless Steel (Bayonet type).
Weatherproof Construction
Socket + Element
AISI 316 Stainless Steel
Thread
1/8", 1/4", 3/8", 1/2" NPT, BSP, BSPT
Movement
Stainless Steel
Dial
White Aluminium (Black Printing)
Pointer
Black Aluminium
Window
Sheet Glass
Standard Size
63, 100, 150mm (2.1/2", 4", 6")
Accuracy class
+-1%
|
|
Description & Features:
• High quality, heavy duty gauge ideal for corrosive environments
• Stainless steel
• 1/2” NPT bottom
• Stainless steel wetted parts
• Heavy duty movement and Bourdon Tube
• Restrictor screw standard
• 5 year warranty
Applications:
• Outdoor and severe ambient and process conditions
• Where harmful vibration and pulsation are present
• Designed to the specific needs of oil field equipment
|
|
Bourdon Tube Pressure Gauges Models RSCh / RSChG / RSK / RSKG
This model is suitable where high safety standards are required, e.g. for oxygen service acc. to EN 837-2.The highly chemical resistant stainless steel case is provided with a solid front between measuring system and dial and a full blow-out safety back, according to S3 of EN 837-1.
Different case sizes are availabel: 63 mm (2½"), 100 mm (4") and 160 mm (6").
Electrical accessories and chemical sealscan be mounted. Numerous options are available to suit the pressure gauge optimized for almost all kinds of industrial applications.
|
|
Absolute Pressure Gauges with Diaphragm Models APCh / APSChG
These pressure gauges with horizontal diaphragm are developed for pressure ranges 0-60 mbar up to 0-2500 mbar related to absolute zero.
The filled version is provided with a solid front case with full blow-out safety back and a pressure equalizing membrane.
The flange diameter depends on the pressure range: up to 250 mbar diam. 160 mm (6"), and for higher ranges 100 mm (4").
|
|
Differential Pressure Gauges with Diaphragm Models DiP1Ch / DiP1ChG / DiP2Ch / DiP2ChG
Differential pressure gauges model DiP1Ch / DiP1ChG are used for direct indication of low differential pressures (0-40 mbar or 0-16 inches water and above) at high static pressure (max. PN 40 bar (600 psi) or PN 100 bar (1500 psi)).
|
|
Pressure Gauges
Pressure indication instrument, built in cast steel or stainless steel, ideal for applications in corrosive fluids and/or areas which match this material, chemical and petrochemical processes, food industry or special gases.
|
|
|
|
|
|
ServiceJunior without yarn.
Little genius of the diagnosis
Description:
- Transmission without yarn of the data.
- Possibility of data acquisition on the long term.
- Digital display with lighting.
- Conceived for remote control.
- Kit containing the JuniorWin software for PC.
- Function selected of peak (posting with bars and function actuated needle).
- Measurement of the points of pressure at rate of 10 ms reading (function max. min/).
- Range 50 m minimum.
- Whole Posting of the scale.
- Simplicity of handling by 4 keys.
- Integrated Battery: lifespan 1.500 hours.
- Index of protector IP54.
- Beach of pressure: -1... 16 bar/0... 100 bar/0... 400 bar/0... 600 bar.
Advantages:
- "Intelligent" Management of the memory.
- Is based on technology without wire, no connection by cable towards the PC is not necessary.
- A faster transfer of the data Allows the PC.
- Direct and simple Connection of ServiceJunior on the hydraulic system.
- No other portable apparatus nor another sensor and cable are necessary.
- Simple Use with lower costs for better results.
- Robust Enclosure not dirtying.
Applications:
- Machine tools
- Mobile Machines
|
|
Function : Pressure, air velocity and air flow with Pitot tube
- Manual self calibration
- Adjustable climatic parameters for air velocity compensation
Measuring ranges :
> MP 100 - MP 120 : from 0 to ±1000 Pa
> MP 101 : from 0 to ±1000 mH2O
> MP 105 : from 0 to ±500 mbar
> MP112 : from 0 to 2000 mbar
Supplied with calibration certificate.
Join our distribution network all over the word....Contact us !
|
|
Serie 2000, C300/310/320, HMG1
portable handheld digital pressure gauges:
Für precise measurement of pressure, vacuum and differential pressure.
Ranges 0/25 mbar, 0/130 mbar, 0/500 mbar, 0/1 bar, 0/2 bar, 0/7 bar, 0/10 bar and 0/2 bar absolute.
Accuracy 0.15% of reading +0.15% of full scale value 1 digit.
Easy operation, great performance, rigid housing IP 67, overrange protection, autoranging displays for precise readings, selectable auto switch-off.
Three versions are available:
Basic version, extended version with Min/Max storage and selectable pressure unit and version with data logging and leak testing functions.
Zeroing simply by pressing one key.
Other types (C300/C310/C320, LPM3, HMG1) also available.
|
|
KIMO specially designed and developed MP200 for pressure, air velocity and airflow control.
Simple, accurate and intuitive, MP 200 has a large colored display and easy browsing is done thanks to its joystick on keypad.
Multi-probes, innovative and evolutive, it can be equipped with :
- 5 differents pressure module : from 0 to ±1000 Pa, from 0 to ±1000 mmH2O, from 0 to ±500 mbar, ±2000 mbar, from 0 to ±10 000 Pa.
It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument.
- Thermocouple temperature probes (until 4 inputs simultaneously).
- CO probe for air quality control
- Pitot tubes and Debimo blades to realize velocity and airflow measurements from 2 to 100 m/s and from 0 to 99 999 m3/h.
MP200 can measure, store up to 8,000 values and restore on PC (wireless communication).
Join our distribution network all over the word....Contact us !
|
|
Flex-Tube® U-Tube Manometer - Series 1221/1222/1223
Ranges from 8 to 36" w.c. (200 to 1000 mm)
Flex-Tube® U-Tube Dual Range Inclined Manometer - Series 1227
Vertical Range 0-16" w.c. (0-400 mm), Inclined Range -0.2 to 2.6" w.c. (-5 to 70 mm)
Flex-Tube® Well-Type Manometer - Series 1230/1235
Ranges from 8 to 36" w.c.
Gas Pressure Manometer - Series 1213
Range from 0 to 15" w.c.
Slack Tube® Manometer/Gas Pressure Kit - Series 1211/1212
Ranges from 8 to 120" w.c. (50 to 100 cm)
|
|
Inclined Tube Manometer
Inclined tube manometers are reliable traditional pressure meters for measuring small over pressure, underpressure or differential pressure. For example, the model MM200600 is ideal for monitoring air filters for contamination.
|
|
|
|
|
|
With the KIMO liquid column manometers it is possible to carry out precise measurements of slight variations in pressure, depression, differential pressure of air or gas.
They are mainly used in the treatment of air, heating, ventilation, air conditionning and dust removal to monitor pressure of filters, clean rooms, chimney flues and ventilation networks.
The Kimo liquid column manometers are produced by machining 15 or 20mm thick PMMA better known by the trademark Altuglas®
Adjustement : the zero point can be set by adjusting the scale after setting the horizontal position of the manometer, using the integral spirit level.
Accuracy : the accuracy is +/-2% of the full scale for the inclined models and +/-1% for the vertical models at a temperature of 20°C with a minimum tolerance of +/-1 scale graduation. Maximum static pressure 6 bars. Operational range from -30°C to +60°C depending on the liquid used.
Standard equipment : standard manometers are fitted with two n°487 connections and are supplied complete with PVC wall bracket, manometric fluid, screws and raw plugs.
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
The new ergonomically formed professional pressure measurement instruments series S2600 from AFRISO were developed for the accurate measurement of vacuum, pressure, differential and relative pressure of gaseous, non-aggressive media.
The small but robust instruments are well protected against dirt, blows and shocks by an additional outer soft plastic protective housing with a magnet integrated in the back, which offers the user hands-free operation. On the large LC-display two measurement values are displayed simultaneously; LCD transflective technology and on/off switch for back lighting ensures easy-to-read operation in low light environments as well as in direct sunlight. Measured values can be displayed in units of mbar, Pa, hPa, kPa, mmHg, inHg or psi by depressing the key "UNIT". The "HOLD" function enables actual values to be held on display, via "ZERO" it is possible to adjust the zero point any time and as often as necessary. In the operation mode "AUTO" the best possible display of the measured value is pre-adjusted automatically and with an increasing measurement value, the resolution is adjusted accordingly.
The instruments are suitable for medium temperatures from 0 °C to +40 °C and available in three (Differential) pressure ranges as Type S2601 (range 150 mbar, resolution 0.01 mbar), Type S2610 (1.000 mbar, 0.1mbar) with 8 mm standard connections and as Type S2650 (5.000 mbar, 1mbar) with a 3 mm Festo connection. Supply is via two standard 1,5 V Mignon batteries.
The instrument Series S2600 is certified according to EN 50379-2 and therefore particularly suitable for all official measurements. There are a multitude of applications for these attractively styled and handy instruments in industry, laboratories and in the HVAC sector. The measuring instruments are for instance used for the testing of filters and gas pipes, for checking ventilation systems and liquid tanks or for chimney draught and vacuum measurements.
|
|
|
|
