|
|
|
|
|
|
Badotherm seals are available in stainless steel AISI316 as standard. They can also be manufactured in all known exotic materials. Naturally, our seals can be supplied with 3.1.B and other material identification certificates. The smallest diaphragm diameter offered is 23 mm / 1” and the biggest diaphragm is 89 mm / 3½”. At these dimensions the lowest possible measurement for a chemical seal mounted to a gauge pressure transmitter is 10 mbar and we can even reach as low as 2 mbar for a DP measurement. We offer a temperature range from –140 °C to a maximum temperature of 400 °C. With a wide choice of system fill fluids and diaphragm materials, the Badotherm chemical seal range is the most flexible and extensive available in the industry.
Badotherm seals can be added to virtually any pressure measuring device. Pressure gauges, transmitters, sensors and switches are all compatible. The purpose of a chemical seal is to protect instrumentation from extreme temperatures, and from aggressive, highly viscous, corrosive, heterogeneous abrasive, and toxic media’s. Chemical seals enable not only, hygienic connection of measuring instruments in the process industry, but can also be used for simple wastewater applications or more highly sophisticated process- and petrochemical applications
|
|
Applications:
- Biochemical and pharmaceutical industry
- Sterile process technology
- Food and beverage industry
Special Features:
- Neumo BioControl® connection
- No dead space
- Hygienic design
- Materials and surface finish according to the guidelines and standards of the pharmaceutical industry
- 3-A certified and FDA approved
|
|
● Instrument Connection: female thread 1/4" to 1/2" BSP or NPT
● Membrane Size: ø45,ø75 available
● Process Connection: 1/4" to 1/2" thread BSP or NPT
● Temperature Limited: -40~+150ºC cooling element or capillary line up to 350ºC
● Pressure Range Limited: maximum up to 40kg/cm²; minimum -760mmHg~0(ø75 membrane), -1~3kg/cm²(ø45 membrane)
● Material: upper & lower housing SS316(standard), others on request
● Membrane: SS316L(standard), options-Hastelloy C276, tantalum and others on request
|
|
plane, special materials, 40 bar max
plane, stainless steel and special materials, 400 bar max
plane with assemblage wafer, stainless steel and special materials, 160 bar max
|
|
Ashcroft® pressure gauges can be found in hundreds of industries and on millions of products. They are used in industries such as oil, chemical, wastewater, pharmaceutical, food, semiconductor and more. Ashcroft pressure gauges are available in dial sizes from 23 mm to 12 inches; in ranges from inches of water to 100,000 psi; in dozens of different case types and materials; and with thousands of options.
Along with pressure gauges, Dresser Instruments offers a wide variety of Ashcroft diaphragm seals and instrument isolators to meet the needs of processing plants and facilities. Customers can select from a variety of configurations from capsule type, welded or bonded and clamped designs with threaded, flanged and flushing connections just to name a few. Diaphragm seal materials are available for all types of applications and have been designed to work seamlessly with other Ashcroft products.
|
|
Diaphragm Seals with Thread or with Flange Connection, Models MDM 7210, 7211 and 7280
Chemical seals models MDM 7210 and 7211 consist of three separate parts: the upper housing with welded diaphragm, the lower housing and the attachment flange.
Different materials can be combined, and different connection types and sizes. This way, our chemical seals series MDM 72.. are available in suitable variations for innumerable applications and media.
The construction and function of these models are similar, but the allowed minimum and especially the maximum pressures differ.
MDM 7280 is constructed for higher pressure (400 or 600 bar). It has no separate attachement flange as the other models, but the upper and the lower housing are tied directly together by 6 bolts M 20.
|
|
- Extensional diaphragm seal type
- Flange rating: 1"~4"
- Material: SS316, H.C.
- Range: On request
|
|
|
The fully automatic side sealer Universa 400 is the answer to (almost) all packaging requirements. Its name reveals the concept and objective for this universal film packaging machine. The encoder control by KALLFASS based on the Siemens S7 was realized for the first time in serial machine production. Complicated and time consuming fine tuning of timers with different product length or speeds are history. End users with constant product change-over appreciate the advantages of encoder controls. Manufacturing plants with a wide product range, as well as industrial service - and contract packagers, profit highly from a simplified production process.
|
|
Compacta EMS
The entry level model full overwrap machine for automatic wrapping. Working in line this photocell controlled machine can be fed either manually or automatically. Using cente folded film a pack having a seal on three sides is produced. Because of the constantly heated sealing system all heat sealabels films from Polyetylene to Polyolefin may be used.
Technical Data
Approximate format: 450 mm
Sealing width: 500 mm
Passage height: 150 mm
Additionally possible: up to 200 mm
Film width: 650 /650 mm
Speed: up to 60 T/min.
|
|
SYNTH
SEMI-AUTOMATIC HEAT SEAL CHAMBER SHRINKING MACHINE
- Capable to utilize PVC - PP - Polyolefin
- Extractable film carriage provided of two micro perforators
- Film: Inner core 3%u201D %u2013 Ext. Diam. 300 mm. %u2013 Max. Width 550 mm.
- Sealing bar dimensions 550 L. x 400 W. mm.
- Max. Product height 200 mm.
- Stainless steel insulated chamber
- Adjustable sealing height with 4 different heights
- Teflon Covered Sealing bar
- Magnet to hold-down the chamber while shrinking
- Electronic digital control board, easy extractable, with:
- Sealing time and temperature adjustments
- Automatic chamber release timer adjustable
- Two working programmes: Sealing and subsequent shrinking / Sealing only
- Casters standard fitted
- Installed power 3,650 kW
- Heating Resistances 2800 W with electronic adjustments
|
|
Model 50 Plastic Tube Sealer
This plastic tube sealer is perfect for small batch runs research and lab use or start up operations. It’s easy safe and economical to operate. This machine seals one rack of tubes in the time it takes to prepare a second rack. An external air supply is required to run this pneumatic sealer.
|
|
SC 200
Automatic side seal machine for shrink films as well as not shrink films. Medium-high performance level.
The automatic SC side seal machines have been designed to pack all type of products whatever may be the length, with shrink and non shrink films, for productions of up to 85 cycles / min.
Versatile machine with simple regulations, it is quickly adaptable to the different products to be wrapped.
Side sealed packs avoid seals over and under, giving clear products with or without shrinking.
The SC 200 has been specially designed to achieve high productions, even with frequent format changes, including devices that allow for fast and easy changes without the need of tools.
An industrial PC control system includes a simple and quick communication system through touch sensitive screen which provides constantly a complete diagnostics of the status machine and the control parameters.
|
|
Model 630CH Constant Heat Sealer
- The 630CH Constant Heat Sealer incorporates all the features you need to make this sealer an integral part of your medical product validation process. Full Digital temperature Control via PID with +/- 1 degree process controls provide the confidence all process parameters are maintained Seal-to-Seal.
|
|
F20 Plus Shuttle Sealer
The F20 plus is available in Single shuttle or dual shuttel models. Industry leading half ton press with 16" x 22" seal area. Seal product from the left side or right side or double production with the optional dual shuttle. The new F20 plus accepts all Sencorp original F20 tooling. Tray loading is effortless witht the unique shuttle roller bearing guidance system. Arrange your manufacturing space more efficiently, save valuable floor space with the efficient table top design, or add the optional machine cart cart so you can easily move the sealer where you need it. The F20 plus thermal impulse clamshell sealer allows you to seal the most challenging materials.
|
|
HDMP3 Heavy Duty Vacuum Sealer 20-35"
The Heavy Duty Multi-Purpose Series Sealers have the Power and Control it takes to handle virtually any sealing, vacuum sealing or modified-atmosphere packaging application. Dual side or single side heating and high pressure seal bars from 20" to 60". Wide Body 35", 40", 50" and 60". Small Body 20", 25", and 30".
|
|
Model 530 Plus High Temperature Sealer
Model 530 High Temperature Medical Impulse Heat Sealer. Designed for heat sealing FEP Cryo bags and peelable packaging systems for the Cryopreservation of Tissues and Cells. Reliable, repeatable heat seals, every time. Validatable heat sealer meets 11607 requirements.
|
|
Model 30 Pneumatic Impulse Heat Sealer
This pneumatic jaw pressure sealer is the best all around bag sealer on the market and our top model for volume production. It combines performance with value in a machine that adjusts for most film sealing situations.
|
|
Model 20 Manual Accu-Sealer
This heavy duty heat sealer machine is the one we recommend when a manual, yet rugged bag sealer is needed. This portable tabletop unit can be used for low volume production as well as situations that require heavier film thickness.
|
|
HDMP3 Heavy Duty Vacuum Sealer 35-60"
The Heavy Duty Multi-Purpose Series Sealers have the Power and Control it takes to handle virtually any sealing, vacuum sealing or modified-atmosphere packaging application. Dual side or single side heating and high pressure seal bars from 20" to 60". Wide Body 35", 40", 50" and 60". Small Body 20", 25", and 30".
|
|
Model 635 Gas/Vacuum Sealer
The model 635 is the perfect solution for packaging moisture and oxygen sensitive products in critical environments. The 635 Gas-Vac model offers the user the flexibility of selecting one of five multiple process operating modes via the "Smart Pad" control center. Ask for the validatable option.
|
|
| ... products without technical information |
| |
Single seals for 13mm (1/2") or 16mm 5/8" plastic strap
with manual sealers or manual hand tools
Stacked seals for 13mm (1/2"), 16mm (5/8"), 19mm (3/4")
plastic or steel strapping with magazine tools.
Swiss-Made quality for highest seal and joint strength
|
|
| ... products without technical information |
| |
Plastic corrosion-resistant pumps
Pumps for processing chemically-aggressive liquids made from corrosion-resistant thermoplastics: PP, PVC, PVDF, PE-HD. No metal parts in contact with pumped liquid. Chemical process pumps designed around system specifications and chemical resistance.
Horizontal pumps model OMA
These centrifugal close-coupled horizontal pumps allow the transfer, recirculation and distribution of chemicals contained in storage tanks or process vats, the loading-unloading of tank trucks...
They are quipped with mechanical seal.
Their particular constructive features guarantee superior resistance to chemical aggression and an extended operating life.
Installations: flooded suction or with priming chamber (SP series). In this latter case the pump intake capacity is influenced by vapor pressure, foam, and temperature.
|
|
UCN-L SERIES
TECHNICAL SPECIFICATIONS
Materials PP/PVDF/PFA
Flow rate 80 mc/h
Head 65 m
Temperature range da -15 °C a 120 °C
Allowable pressure rating max 20 bar
Viscosty 400 cSt
Impeller type Chiusa
Motors 0.75 - 18,5 Kw
ATEX 1-2G
Velocity range 1450 - 3500
Pass solids Max 150 micron, 2 % in peso, 800 Vk max
Inlet outlet port ISO 2858
Standard DIN 24256 (EN22858)
|
|
Rubber-Lined cast Iron:
Pump body made of vulcanite coated cast steel Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP)
Closed centrifugal pump impeller Very good efficiency
Max. flow rate up to 57 m3/h
Max. pump-out height up to 47 m
Impeller back-balanced on drive shaft with gasket Carbide / carbide gasket, very resistant to wear
Integrated electric motor Reduced dimensions
Synthetic materials:
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser Very good efficiency
Max. flow rate up to 48 m3/h
Max. pump-out height up to 25 m
mpeller back-balanced on drive shaft with gasket Carbide / carbide gasket, very resistant to wear
Integrated electric motor Reduced dimensions
Automatic repriming Pump-in height up to 2 m
|
|
Seal Puller SP 50
Novel tool for the dismounting of oil seals and sealings of all sizes.
The toolkit SP 50 provides a simple method for dismounting rotary shaft seals in a wide variety of applications. It consists of a sliding hammer, 2 extensions and 50 spare screws. With this basic equipment 50 seals can be dismounted.
■ 50 special screws for removing rotary shaft seals
■ 20 spacer sleeves
■ Slide hammer made of steel
■ 2 extensions
|
|
|
|
see the results for the following category : 
