|
|
The DPG8000 series digital pressure gauges offer 1/4% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical test gauges. All stainless steel wetted parts make it suitable for a wide variety of liquid or gaseous media. This product features user-selectable units of measure allowing one gauge to be used for a variety of pressure scales.
The DPG8000 comes standard with many features that are either not available or offered only as options on many competitors’ digital gauges such as backlight, peak hold and a four-digit display.
- Enhanced Value Versus Mechanical Gauges
-1/4% Full Scale Terminal Point Accuracy
- 4 Digit Display with 1/2" High Digits
- Backlight Feature for Enhanced Visibility
- User Selectable Engineering Units
- G1/4 (1/4" BSPP) or 1/4" NPT Threads Available
- Maximum Pressure Indication
- Stainless Steel Wetted Parts
|
|
Digital Displays, Meters, and Manometers: Setra's LCD digital displays can be used in-line or as an integral part of the pressure transducer or transmitter. The Datum 2000 manometer is a complete system, includes choice of Model 204, 204D or 239. In addition, Setra's Datum 2000 meter and manometer feature a user-friendly selectable menu.
Model LD330: The Model LD330 with Liquid Crystal Display (LCD), can be configured in line between Setra's pressure transducer (or transmitter) and a data acquisition system. Value is built in to the design with a rotatable housing for optimum display viewing at any angle.
Datum 2000: Dual Channel Meter or Manometer - The Datum 2000 Dual Channel Meter can be configured externally with one or two pressure transducers or transmitters. The Datum 2000 Manometer is a fully self-contained unit with factory installed pressure transducer or transmitter.
|
|
Model : MN14
DS : 100-150
Mechanical intervention : sliding, inductives, electronic
Intervention number : 1...2
Protection degree : IP 44
|
|
|
|
|
|
XP2i-DP Wet Wet Differential
XP2i-DP Features:
- High accuracy, long term vacuum measurement
- 0.1% of reading wet/wet differential transducer
- 15 and 100 PSI versions rated to 100 PSI static pressures
- Transform your XP2i-DP into an indicator for Torque, Force, Level, or any other unit using the Custom Units Wizard using the free ConFigXP software
- Add special features such as Pressure Safety Valve (PSV) mode to capture valve open/close pressure
- Customizable for panel mounting or portable configurations
- ATEX / IECEx / CSA intrinsically safe
- Optional datalogging capability
- LCD backlit display
- Easy to use buttons
Applications
- Gas filter testing
- Level measurement
- Rotary gas meter testing
- Autoclave vacuum monitor / calibration
Included with every new XP2i-DP Differential Digital Pressure Gauge is an A2LA accredited calibration certificate with test data recorded at 5 different temperatures - proving that it meets published specifications over the entire operating range. You won't get this kind of detailed report anywhere else!
|
|
|
|
|
|
The Best Digital Gauge on the Market, Just Got Better!
The 2nd generation XP2i is a very rugged, intrinsically safe, digital pressure gauge that fits in your palm with 0.1% of reading accuracy.
Unlike Other Digital Gauges:
- New nickel plated aluminum enclosure is sealed to IP67 (waterproof to 1 meter)
- Backlight is twice as bright, but batteries last just as long
- 10% larger LCD window for a larger viewing angle
- Internal pressure is equalized by a GORE-TEX® filter
- All XP2i gauges are now CSA, IECEx and ATEX certified intrinsically safe
- Captures open and reseat values for Pressure Safety Valve (PSV) testing
- Optional pressure datalogging capability
- Torque and force measurement capable
- Simple to use
Unlike Mechanical Gauges:
- Dropping can’t affect accuracy
- Overpressure doesn’t affect accuracy
- Repeatable readings
- No hysteresis
- No temperature or gravity effect.
Unlike Anything Else:
- 0.1% of reading! Like a deadweight tester!
- Calibration report with data at five temperature
- Replace three or more 0.25% standard gauges
- Pressure recording by DataLoggerXP to record pressure and ConFigXP to enable or disable features
- Customize your XP2i for panel mounted configurations or portable applications
- any XP2i can be cleaned for oxygen service
- CE certified and manufactured under a ISO 9001 registered quality system
- Runs on 3 AA alkaline batteries providing up to 1,500 hours of service
Pressure is Our Business!
|
|
Your ATEX Compact Vacuum Meter for 1050 to 1 mbar
The compact vacuum meter VD82 is fully electronic and combine high quality sensors and modern microcontroller technology with a handy design.
Our customers appreciate these easy-to-operate gauges as reliable tools in plant engineering, service and laboratory.
The digital display of your vacuum meter shows the exact absolute pressure. Sensors with temperature compensation and sophisticated evaluation electronics guarantee precise and reproducible measurement results.
Further Advantages
- External sensor
- Display of minimum and maximum pressure
- Automatic switch-off or continuous operation
- High battery lifetime due to clocked measurement
- Operation with battery or mains adapter
- Robust stainless steel flange
- For mobile use or fixed installtion
|
|
Model : MN17/L
DS : 250
Ranges : 0...1/0...1600 bar and vacuum
Working pressure : max 75% of FSV
Accuracy class : 0.1...0.25 as per EN837-1
Protection degree : IP 44
Wetted part : AISI316L, beryllium copper alloy
Other features : anti-parallax dial
|
|
Miniature pressure & vacuum gauges save space. Ideal for use with Beswick pressure & vacuum regulators, valves and fittings.
Material: Brass threads with plastic gauge dial and cover.
|
|
The WT is a Wally box replacement!
The WT version of the XP2i is designed to replicate the dimensions and pressure connections of the most common test gauges mounted in portable cases. It is a drop in replacement for the Wally box.
0.1% of reading accuracy
Batteries and digital communications are accessible from the front
Rugged "Wally Box" gauge can stand dropping
Optional Pressure datalogging capability
Fast delivery
Comes in 6" and 8.5" options
|
|
All Stainless Steel Pressure Gauges MAN-R
All St. St. Pressure Gauges with analogue output MAN-Z
Differential Pressure Gauge MAN-D
Digital Pressure Gauge MAN-SD/-LD
Digital Pressure Gauge PDC
Digital Pressure Gauge MAN-SF
Diaphragm Seal
Bourdon Tube Test Pressure Gauges MAN-F
Capsule Element Pressure Gauges MAN-K
Accessories for Pressure Gauges
Diaphragm Pressure Gauges MAN-P
Bourdon Tube Pressure Gauges MAN-R
Hand-Held Pressure Gauge HND-P
|
|
Capsule
Diaphragm
Differential
Glass tube pressure gauges
Electric contacts
|
|
Swivemas pressure gauge
Incorporates the unique integral 'SWIVEMAS' - joint between valve and instrument which gives the ability to obtain a pressure tight metal-to-metal seal without the use of tape and allows the gauge to be locked in any 360 Degree orientation.
SWIVEMAS Mark-2 versionJjas fixed collar and secondary O ring seal. Available with SWIVEMAS' - gauge to eliminate leak paths by reducing the number of gauge-to-valve joints from the usual three to only one thereby helping to meet environmental concerns by preventing fugitive emissions.
Has trace codes on body with material certificates available for all wetted parts on request.
Valve/Gauge combination unit gives weight and space savings.
Can be supplied to NACE MR-01-75 latest edition.
Pressure joint can be made, broken then remade and still retain full pressure seal integrity.
Bleed hole facility gives warning of incorrect mating of cone faces whilst mechanical integrity is still maintained.
|
|
DPG-1: Bottom-Entry Pressure Gauges
Description:
Series DPG-1 Bottom-Entry Pressure Gauges are used in commercial, residential, and institutional HVAC applications. It features an ABS polymer case, Kostil Polymer window, 1/4 in. NPT connection, and copper alloy Bourdon tube sensing element. Accuracy is ASME, Type B. Available in various pressure rating scales. Dual scale (PSI and kPa).
|
|
Model : SP
DS : 63-100
Ranges : 0...1/0...40 bar and vacuum
Working pressure : max 75% of FSV
Accuracy class : grade A as per ASME B40.1
Protection degree : IP 67
Wetted part : AISI316L
Other features : fillable and filled case
|
|
Pressure gauges and thermometers for chemical or dairy industries
Pressure gauges :
Stainless steel casing Ø63 / Ø100 / Ø150, dry or glycerine filled
BSPP fitting, axial or radial, in Stainless steel or brass
For food industry, Clamp or SMS fitting with stainless steel diaphragm
Bar / Mpa / PSI...
Thermometers :
anodized brass casing, height 150 or 200mm
BSPP fitting, vertical or axial, in brass or stainless steel
...
|
|
Model : MN9/N
DS : 63
Ranges : 0...60/0...600 mbar
Working pressure : max 75% of FSV
Accuracy class : 1.6 as per EN837-3
Protection degree : IP 55
Wetted part : copper alloy
|
|
Pressure Gauges
Utilising its vast experience of providing high quality instrumentation solutions to the worldwide industry, Delta Controls has launched a comprehensive range of instrument gauges.
These guages are produced to the usual high specification and quality that process plant operators, engineering contractors and OEM customers demand and expect from Delta Controls.
By carefully selecting worldwide suppliers that produce to the high quality demanded by Delta, customers can now specify gauges to complement Delta's comprehensive range of pressure process instrumentation.
|
|
MI 150 S/113/1,6
Application:
For all gaseous and low-viscosity liquid media that will not obstruct the pressure system orattack copper alloy parts.
Suitable for industry, heating, water supply,air-conditioning, pneumatics.
|
|
Description & Features:
• StabiliZR™ dampened movement minimizes effects of pulsation and vibration without liquid filling
• Stainless steel case
• Back, bottom, or panel mounted
• 316L stainless steel wetted parts
• CRN registered
• 5 year warranty
Applications:
• Ideally suited for process, chemical and petroleum industry
• Where chemical compatibility and contamination is a concern
|
|
|
|
|
|
The Models 1530 and 1535 are feature ±1% of span accuracy and utilize 300 series stainless steel case. These heavy duty 2", 2-1/2" and 3-1/2" pressure gauges are specifically designed to withstand the corrosive atmospheres, such as salt air, sour gas, and other industrial gases.
These gauges are also used in specialty gauge regulators and gas cabinets, as well as many other applications. The Model 1535 features
all internal wetted surfaces of 316L, making these gauges ideally suited for use with corrosive process media.
The Model P1535 is available in pressure ranges from 30" Hg VAC-0 psi to 0-3000 psi. This precision gauge incorporates rugged case construction with rear pressure relief, and a seamless Bourdon tube with welded joints for heavy duty service.
SPECIFICATIONS
SIZE: 2", 2-1/2", and 3-1/2"
CASE: Drawn stainless steel polished with pressure relief in
back of case
RING AND WINDOW: One piece, threaded polycarbonate
POINTER: Aluminum, adjustable, black finish
DIAL: Aluminum, white background with black markings; dual scale dials available in some pressure ranges
BOURDON TUBE
P-1530: Beryllium copper, silver brazed
P-1535: 316L seamless stainless steel
CONNECTION
P-1530: 1/4-18 ANPT brass
P-1535: 1/4-18 ANPT 316L stainless steel
RANGE: VAC-0-30 psi to 3000 psi
ACCURACY (Grade 1A):
±1% of span for range to but not including 3000 psi
±2% of span for ranges 3000 psi and above
SCALES: psi, bar, kg/cm2, kPa (single or dual scale)
|
|
Full stainless steel made pressure gauges and thermometers for chemical and food industries.
Industrial pressure gauges: ND100 and 63 dials, IP65, BSPP axial and radial conexions, up to 250 bars.
Sanitary diaphragm pressure gauges: ND100 and 63 dials, IP65, Clamp, SMS or DIN conexions, up to 25 bars.
Thermometers: ND100 and 63 dials, 100mm Bulb length horizontal or vertical connexion up to 250°C
|
|
Description & Features:
• Designed for sour gas applications requiring NACE Standards MR0175-2002 (NACE Standards MR0103-2003 available)
• Pressure release disk standard
• Gauge meets minimum hardness requirements
• CRN registered
• 5 year warranty
Applications:
• Sour gas applications requiring gauges that meet NACE International Standards
|
|
Diaphragm pressure gauge NS 160
- Fields: Machine and Process Industry, Power Plants and Distribution, Automotive Industry
- Type: DP-DPO-DPE-DPOE160
- Range of application: Mechanical engineering, energy engineering, plant engineering, system engineering
Diaphragm pressure gauge NS 100
- Fields: Pharmaceutical and Biotechnical Industry
Heating, Ventilation and Air Conditioning, Machine and Process Industry, Power Plants and Distribution, Automotive Industry
- Type: DPC-DPO100-8
- Range of application: Chemical and petrochemical industry, plant engineering, food industry, energy industry
|
|
MM 160G/717/1,6
Application:
For difficult gaseous and liquid media which are viscous, aggressive, includes element or pollute. With liquid filled case for applications with high dynamic pressure pulsations or vibrations.
Suitable for chemical industry, petro-chemical industry, mining industry, mechanical engineering, enviromental technology and plant construction .
|
|
- Extensional diaphragm seal type
- Flange rating: 1"~4"
- Material: SS316, H.C.
- Range: On request
|
|
● Pancake Type
● Instrument Connection: female thread 1/4" to 1/2" BSP or NPT
● Process Connection: 2" to 4" flange, JIS, ANSI, DIN available
● Temperature Limited: -40~+350ºC
● Pressure Range Limited: please refer to catalogue.
● Material: Body-SS316(standard), others on request
● Membrane: SS316L(standard), options-Hastelloy C276, tantalum and others on request
|
|
|
The SDP1000 family of differential pressure sensors provides precise differential pressure measurement with an analog 0 to 4 voltage output. It is available in several ranges up to 3’500 Pa (14 inch water) and measures even miniscule pressure differences below 0.1 Pa (0.0004 inch water). Mounted in a rugged, chemically inert PPS housing the differential pressure sensors feature high dynamic range and long-term stability. The SDP1000 series is an ideal choice for demanding medical and HVAC systems. Superior performance and simple operation help minimize design effort.
|
|
Magnehelic Differential Pressure Gauges
- Model Number:2005
- Range, Inches of Water:0 to 5.0
- Minor Div.:.10
Photohelic Differential Pressure GaugesSwitch
- Model Number:3025
- Range, Inches of Water:0 to 25
- Minor Div.:.50
|
|
4503, 4906, 4901
Differential Stainless Steel pressure gauge
Differential pressures are commonly used in industrial process systems. Differential pressure gauges have two inlet ports, each connected to one of the volumes whose pressure is to be monitored. In effect, such a gauge performs the mathematical operation of subtraction through mechanical means, obviating the need for an operator or control system to watch two separate gauges and determine the difference in readings.
|
|
|
|
|
|
Miniature Differential Pressure Gauges
These miniature differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications, they are a low cost alternative to bourdon tube and bellows designs. Both piston and diaphragm sensor models are available as in our standard size instruments. Their small size and low cost make them ideal for OEM use.
We offer them with bodies (and wetted parts) of aluminum. The indicator models come standard with a 1" molded plastic lens while a 2" dial is available as an option. A variety of porting options allow for any mounting configuration.
A red/green dial with a breakpoint located at 70% of full scale alerts the user of the condition of the process. This matches the setpoint of the reed switch if ordered together.
Note: Our piston sensor models are best for liquid applications as they have a slight amount of fluid migration from the high to low pressure ports. Select our diaphragm models for air or gas applications or where fluid migration cannot be tolerated.
|
|
|
|
