|
|
Resato offers a unique combination of in-house engineering and production of both components and systems. We are proud to present our extensive product range. This overview gives a good impression of our scope of delivery of our standard systems. If you wish to receive more detailed information on one or more of our products, please feel free to contact us. Our sales department would be pleased to be of your assistance and is ready to answer any questions concerning our products.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Hydraulic pressure testing system that monitors and diagnoses fluid systems in a snap. Snap-Check enables machinery manufacturers to test system pressure quickly, easily, and leak-free. In the case of larger equipment, Snap-Check enables system pressure to be checked both after it is assembled at the factory and following reassembly at customer locations. The low-profile system identifies operating pressure and surges, without the need for a permanently installed gauge or transducer.
Requiring only one hand for connection and disconnection, CEJN Series 358 couplings and nipples make up the most user-friendly pressure testing system available. The Snap-Check system offers:
· Working pressures up to 60 MPa
· Smooth operation in temperatures from -40° F to +212° F
· Standard red plastic dust caps or optional metal screw-on caps that keep the system clean and free from grit and dirt when not in use
· Variety of thread configurations, including NPT, BSP, BSPT, metric, and SAE
· Long-lasting, reliable, test-port fittings and couplings for numerous applications, such as mobile hydraulic off-road equipment
Snap-Check liquid-filled pressures gauges are available in a wide variety of sizes and pressure ranges.
|
|
- 30psi
- Rugged Extruded Aluminum Housing
- Measure positive and differential pressure.
- Push button zero for altitude correction.
- Seven selectable units of measure to choosefrom: mmHg, inHg, kPa,
- Easy-to-read LCD.
- Backlight with auto shut off after 10 seconds.
- Auto shut off after 30 minutes (except RECmode) to save battery life.
- Data hold to freeze reading on LCD.
|
|
When train speeds are high, there are two crucial requirements: safety and minimal wear. Only perfectly maintained bogies ensure that these demands are met. This is where the most recent Schenck development comes into play: the first test bed using spindle technology.
With MULTIRAIL® BogieLoad, Schenck is banking on safety through all around inspection. Electromechanically designed, the bogie test bed inspects the bogie using the so called spindle technology developed by Schenck. This novel feature increases repeatability and accuracy whilst reducing the maintenance expenditure.
The novel test bed technology of SCHENCK is used for the inspection of high speed train bogies. BogieLoad measures and acquires the wheel load distribution with the use of weighbeams. Geometrical data e.g. axis parallelism, are among the additional measuring parameters.
Typical application: bogies of high speed trains ICE 1, ICE 2, ICE 3, ET 420, ET 426.
|
|
|
SATIMO Multiprobe systems were until 2005 only available in the 0.4-6 GHz frequency band. Since 2006 the same speed advantages can be enjoyed by customers working from 70 MHz all the way up to 18 GHz thus making Multiprobe technology the choice for any application from wireless to automotive to defense and space. The full range of SATIMO probes family is available...
|
|
Model TWR95 (standard), Model TWR99 (compact):
- 1-4 meter antenna height standard, 6 meter optional
- Electric height adjust
- 1 cm height resolution
- Low-stretch polyester rope suspension (750 pound breaking strength)
- Pneumatic polarization standard
- Safety brake
- Zero maintenance
- Absolutely no conductive material above motor box
- Fiber optic interface standard
- Extremely low emissions
- Height and polarization switches located at tower
- Molded, one-piece foot and trolley
- Strong, stable construction
- Easy assembly
- Small footprint ideal for compact chambers (TWR99)
- Reduced height for low ceilings (TWR99)
Model TLT2:
- Variable speed with soft start and stop.
- New trolley guide concept enhances azimuthal stability.
- Dual load carriers give rigid, stable elevation under heaviest loads.
- Stable boom extension allows proper focal point placement for any size antenna without moving tower.
- Monolithic construction of major components results in unbreakable, lifetime utility.
- Absence of conductive material above the motor box minimizes the electro-magnetic cross section, and minimizes coupling to antennas.
- Materials are selected for resistance to UV radiation and resistance to water absorption.
- Standard model is operated by a single, standard controller channel.
- Developed for indoor and outdoor use.
|
|
|
SATIMO Multiprobe systems were until 2005 only available in the 0.4-6 GHz frequency band. Since 2006 the same speed advantages can be enjoyed by customers working from 70 MHz all the way up to 18 GHz thus making Multiprobe technology the choice for any application from wireless to automotive to defense and space. The full range of SATIMO probes family is available...
|
|
ATEasy is a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop and maintain software components, from instrument drivers to complex test programs. It is designed to support and simplifies ATE projects with long life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
testXpert® II - Intelligent and Reliable
The New Software Generation for Materials Testing
Zwick Roell has set the standard with testXpert® for intelligent materials testing software. Unlike other software testXpert® has a standardized operating surface for all of its applications, no matter whether static or dynamic tests - so you spend less time learning to handle software and more time conducting tests. With testXpert® II you benefit from over 80 years of testing experience and from over 10,000 successful installations worldwide.
|
|
eZ-TOMAS
Machine Vibration Monitoring Software
for the 600 Series, WaveBook/516E,
and ZonicBook/618E
eZ-TOMAS is the economical solution to rotating machine monitoring and analysis. eZ-TOMAS will continuously monitor your machines. eZ-TOMAS records the change in vibration condition, and quickly provides you with the information you need to make critical decisions.
Key Highlights
• Transient and Steady State rotating machinery analysis
• Easy-to-use graphical user interface and multiple project configurations provide fast setup
• Up to 20 kHz Analysis Frequency, with up to 25,600 lines of resolution
• Field expandable from 8 to 56 channels
• Overall, spectral amplitude, and phase gauges with peak hold indicators
• Spectral limit checking, with output relays and alarm event logging
• Limit sets for specific RPM ranges
• Event data storage based on user defined triggers, with automatic backup
• Rotating Machinery Analysis: Time Waveform, Orbit, Spectrum, Waterfall, Polar, Bode, Shaft Center Line, and Trend displays
• Machine and Bearing Fault analysis and limit checking
• Save/Recall display setups with up to 8 display windows, and multiple overlays
• Integration and differentiation for acceleration, velocity, and displacement inputs
• Harmonic, Sideband, and Peak cursors for time waveform and spectrum displays
• Statistical analysis report with automatic limit generation
• Generate production test cell reports
• Export data to Excel®, UFF Type 58 Binary, or ASCII format
• Copy/Paste graphs and data into Microsoft® applications
|
|
- Long-term software compatibility and flexibility with emerging technologies
- High-performance compiled execution
- Lower cost of ownership
- Strong integration of software and hardware
- Rapid application development
At National Instruments, we not only understand the importance of software, but we also believe software is the foundation of your measurement and control system. Using National Instruments software, including our flagship product, the LabVIEW graphical development environment, increases your productivity in creating test, measurement, and automation solutions through data acquisition, data analysis, and data visualization. Because our software architecture incorporates each of our products, you can use these products separately or together to build your measurement and control system.
|
|
ImageController1 vision system
• 5 measuring results in seconds - independent from the operator
• Edge inspection for quality and wear checks
• Measuring programs for axial and radial runout
• More details (Link) http://ezset.info/index.php?id=88
|
|
Software »pilot 3.0«
Customized to meet your specific requirements
The »pilot 3.0« system of software modules, empowers you to select the optimum components and modules that will meet the specific requirements of your individual production processes. Therefore, »pilot 3.0« will remain streamlined and easy to operate and you will only need to invest in those functions that you really need, to achieve your specific application requirements.
»pilot 3.0« can be used from manual operations over automatic cutting edge recognition, up to 3-axes-CNC-controlled measuring operations. »pilot 3.0« is suitable for every application and especially recommended for automated manufacturing environments and/or a high number of tool changes. »pilot 3.0« is also used in tool inspection.
|
|
| ... products without technical information |
| |
|
Designing for Optimal Durability Performance - Undoubtedly the most challenging task for durability engineers is designing components and systems that are fail-safe - but not over-designed. System parts with insufficient fatigue strength may cause permanent damage and potentially life-threatening situations. In addition, product recalls influence market perceptions negatively.
|
|
Simulate an automobile or airplane crash to optimize a the structure for occupant safety.
Optimize designs of baffles and separators in automotive fuel tanks to reduce noise levels caused by fluid motion.
Determine the collapse characteristics of the main lift frame of a helicopter in vertical crash simulations.
Understand how a consumer product design (cell phone or remote control) holds up during a drop or fall to the floor.
|
|
As a key component in your Virtual Product Development (VPD) process, MSC.Fatigue enables you to quickly and accurately predict how long your products will last under any combinations of time-dependent or frequency-dependent loading conditions, and to optimize your products for weight and shape.
The MSC.Fatigue family offers an integrated suite of products that grow with your needs:
Core products, such as Basic, Pre & Post, Strain Gauge, and Utilities, provide basic functionality for building, testing, reviewing, and improving your products from a durability standpoint.
Add-on products, such as Fracture, Multiaxial, and Vibration, extend the capabilities of the Core products.
Industry-specific products, such as Weld and Wheels, offer fatigue calculations tailored to particular industries or applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
