|
|
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-2800 Series: Accurate/Positive Seal-Reducing
Mechanical link between diaphragm & main valve prevents pressure creep
Positionable captured vent bonnet
44-3400 Series: Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available |
|
26-1100 Series: High Flow Cv=1.3 or .46 - Reducing
Diaphragm sensed - highly sensitive
Modular construction - easy service
External sensing available for improved accuracy
Balanced main valve increases seat life
26-1200 Series: High Flow Cv=3.3 - Reducing
Similar to 26-1100 with higher flow capacity
44-4200 Series: Economical
Dome loaded
Piston sensed - highly reliable
Compatible with TESCOM electronic pressure controllers |
|
The Type-9OOX l/P, E/P transducers are a series of compact electronic pressure regulators that convert an electrical signal (current or voltage) to a proportional pneumatic output. Utilizing internal solid-state feedback circuitry, the Type-9OOX provides precise, stable pressure outputs to final control elements. Immunity to the effects of vibration or mounting position, high tolerance to impure air, and low air consumption make this unit ideal for use in demanding applications.
The heart of this unique technology is a bimorph piezo actuator that is encapsulated in a protective skin. This protective skin provides defense against the humidity and contaminants often found in process operating environments.
|
|
| The Type-550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output. Its compact housing, accessible ports and easy adjustments provide an ideal answer to applications that are space-constrained. This economical instrument provides precision air pressure regulation to actuators, valves, positioners and other final control elements. An integral volume booster provides high flow capacity, increasing control speed in critical applications. |
|
20-1000 Series: Compressed Natural Gas
Balanced main valve minimizes inlet pressure fluctuations
Piston sensed – highly reliable
Water heat jacket standard
20-1200 Series: High Pressure Hydrogen
Nickel-plated aluminum
Large piston sensor
All regulators tamper-proof
20-1400 Series: High Flow / Low Pressure
Diaphragm sensed – highly sensitive
Dome load spring bias ± 2 PSIG
Captured bonnet design for safety
44-6000 Series: In-Line High Pressure
Balanced main valve design
Positive shutoff seal
Captured bonnet available
Patent pending
44-7400 Series: Pressure Reducing
Ideal for CNG dispensing applications
Several porting configurations available
Spring adjust, high outlet, high flow |
|
P38 Gas & Propane Regulator
Balanced pintle design
Exceptional flow capacity
Bubble tight/non-relieving
27 Mbtu/hr (260 scfm)
High volume applications
UL listed
Minimal effect on output pressure from variation of supply pressure
Bellofram Rolling Diaphragm
Product Detail:
The P38 uses a patented balanced pintle design which eliminates unsteady changes in outlet pressure due to inlet pressure fluctuations. The P38 is a spring opposed, diaphragm - operated, non-relieving regulator. The use of a relief valve is recommended for this product in accordance with NFPA 58.
|
|
| The Type 700 is designed for applications that require high flow capacity and accurate process control. A poppet valve which is balanced by utilizing a rolling diaphragm insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the air supply in accordance with the flow velocity. |
|
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-3200 Series: High Flow/Purge
Ideal purge regulator
High pressure inlet version incorporates a balanced main valve to minimize inlet pressure fluctuation
26-1500 Series: Sensitive/Non Venting-Reducing
Compact design
Elastomeric diaphragm - highly sensitive
Dome loading available
For liquid or gas service
26-1600 Series: Sensitive/Self Venting-Reducing
Elastomeric diaphragm - highly sensitive
Controls up to 500 PSIG
Dome loading available
For liquid or gas service
Works with TESCOM motorized actuator for remote control
DH Series: Low Pressure
Diaphragm sensed - highly sensitive
Excellent repeatability
Very high flows at low pressures |
|
54-2100 Series: High Pressure-Back Pressure
Accuracy: ±1% of pressure range
Hardened metal to metal seats for heavy duty service
Eight pressure ranges up to 15,000 PSIG
54-2300 Series: High Flow/High Pressure-Back Pressure
Control pressures to 10,000 PSIG
Flow capacity: Cv = 1.6
Excellent crack to reseat ratio
Hardened metal to metal seats for heavy duty service
54-2700 Series: High Flow/Back Pressure
Flow capacity: Cv = 5.0
Choice of dome loaded, spring loaded, or air ratio device |
|
54-2000 Series: Low Flow/High Pressure-Reducing
Rugged design, high pressure service
Hardened metal to metal seats for heavy duty service
System pressures to 20,000 PSIG
Captured venting standard
54-2200 Series: Medium Flow/High Pressure-Reducing
High flow capacity: Cv = 2.0
Hardened metal to metal seats for heavy duty service
Self-venting is standard
54-2800 Series: High Flow/High Pressure-Reducing
Flow capacity: Cv = 8.0
Inlet & outlet pressures up to 5,000 PSIG
Choice of air ratio or dome loading
Hardened metal to metal seats for heavy duty service
26-2000 Series: High Pressure Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
Pressure relief valves and pressure reducing valves
Flange-, sandwich- and screw-in cartridge construction
Nominal sizes NG3-Mini, NG4-Mini, NG6 and NG10
Screw-in cartridges in accordance with ISO 7789, nominal sizes M18x1,5, M22x1,5 and M33x2
Manual valves
Proportional valves
Maximum pressures up to 350 bar
Volume flows up to 100 l/min
|
|
DOPAG material pressure regulators (MPR) reduce the pressure of the incoming material to the optimum operating pressure.
As well as accurately regulating material pressure, these valves will also compensate for pulsations that occur as a result of the reciprocating action of piston pumps.
|
|
12 Series: Miniature Pressure Reducing Regulator
Product of choice for state of the art OEM gas systems. 10 Ra or 5 Ra microinch surface finish. Available in VCR, tube stubs or surface mount, "C" or "W" seal. |
|
| The Type-800 is a compact air regulator that supplies precise air pressure control for applications where space is limited. This high quality unit, available in five pressure ranges up to 100 psig (700 kPa), offers the same dependable performance as ControlAir's larger precision air pressure regulators. An oversized supply valve provides the Type 800 with significantly higher flow capacities than competitive units of similar size. The Type 800 is also available with a variety of convenient port sizes and mounting options. Corrosion resistant materials, lightweight construction and low cost, combine to make the Type 800 ideal for any application where space is at a premium. |
|
64-2600 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available in two inlet pressure versions, 600 psi and 3,500 psi. For low flow applications. With several outlet pressure ranges up to 500 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
This proportional pressure regulator with digital control can be configured using a PC software, to optimise its response time and accuracy, while maintaining its reliability and dynamic performance levels.
Integrated functions:
* Digital display
* PID parameters set-up
|
|
- For using gases and liquids
- Inlet pressure: 600, 3500 Psig maximum
- Adjustable outlet pressure in ranges: 20, 50, 100, 150, 250, 500 Psig
- Operating temperature: -40 to 175ºC
- Diaphragm materials: 316L stainless steel
- Body material: 316SS
- Seat material: PTFE, Vespel available
- Cv flow coefficients: 0.06
- All ports are standard: 1/4" NPT female
- Use no oil: available |
|
7300 PRESSURE REGULATOR, MALE BSPP
7305 PRESSURE REGULATOR, MALE BSPT AND NPT
|
|
Type 10 Pressure Regulator
Highly Accurate Pressure Regulation
Start-up Stability
Automatic High Downstream Relief Capacity
Locking Capability
Temperature Stability
Ideal for Medical Applications
Product Detail:
There is no other self-contained pressure regulator in the entire world, which can match the regulation accuracy and the repeatability of the Bellofram Type 10 pressure regulator. It is for use where the utmost precision is required. The regulator is actually a pressure controller using a servo-balanced system in which the main valve is operated by a pilot valve and is dependant on a stainless steel measuring capsule for its incredible accuracy. Originally developed for sensitive aircraft altimeters, this precision sensing element provides the energy to activate the servo-control mechanism. It provides greater regulation accuracy and eliminates the problems usually encountered with range springs and conventional diaphragms. The entire measuring element, including the pilot valve, is fabricated from stainless steel which has been carefully heat treated to eliminate hysteresis or permanent deformation under all working conditions.
|
|
44-1100 Series: High Pressure-Reducing
Excellent sensitivity
Piston sensed for high cycle life
Inlet & outlet gauge ports standard
40 micron (nominal) inlet filter
Removable valve module for easy field repair
Self-venting standard
44-1300 Series: High Flow/High Pressure-Reducing
Excellent sensitivity
Self-venting
Extremely reliable
Spring, dome or air ratio loading
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-3400 Series: General Purpose/Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available
26-1000 Series: High Pressure-Reducing
Outlet pressure ranges are field changeable
Numerous porting options
Optional inlet pressures to 20,000 PSIG
Large handknob provides fast low-torque pressure settings
Self-venting standard
26-2000 Series: High Pressure-Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
| The BCP type is a series of dedicated pressure switches for safety and pressure monitoring of steam and hot water boilers. The BCP incorporates a single-pole changeover microswitch where the contact position depends on the pressure in the connection port and the range set value. For installations, in which operation is particularly critical for safety reason, the use of fail-safe control is recommended. |
|
Design:
- Single stage and double stage versions
- Inlet pressures up to 200 bar and 300 bar
- Special regulators for high flow rates
- Available with DIN, CEN, BS and CGA connections
Advantages:
- Extremely high reliability due to central micro filter
- Complete control by excellent visibility of the pressure gauges
- Outlet pressure limiter with double security
- Ergonomical handling and easy operation due to special shape of the hand wheels
Product Range:
- Pressure regulators for oxygen
- Pressure regulators for acetylene, propane, MAPP
- Pressure regulators for hydrogen, methane, town gas, forming gas
- Pressure regulators for argon a.o. inert gases, mixed gases, CO2
- Pressure regulators for nitrogen
- Pressure regulators for compressed air
- Pressure regulators for test gas, carbon monoxide, nitrous oxid
- Accessories, wearing parts |
|
Nor-Cal Products offers unequalled performance with the Intellisys downstream pressure control system, providing measurable process benefits through higher resolution, speed and reliability.
The Intellisys Adaptive Pressure Controller (APC) merges closed loop motor control with adaptive pressure control to provide advanced control system performance. An advanced adaptive algorithm eliminates pressure overshoot or gradual ramps during pressure transition. A Digital Signal Processor (DSP) enables DeviceNet™ communications protocol and programming flexibility for customer or process specific requirements.
Intellisys motor control technology eliminates belts, gears and position switches, improving reliability, while increasing speed by at least a factor of twenty. High-torque geared drives are also available as an option. Standard sizes range from one to twelve inches.
Substantial cost and space savings can be realized with the IQ-Series butterfly valves. All the control electronics are incorporated on to the valve motor drive, resulting in a compact size that is easy to integrate on any system.
Nor-Cal Capacitance Diaphragm Gauges (CDG) feature a ceramic diaphragm designed to help stabilize output noise due to thermally induced variations found in other metal diaphragm designs. Heated, non-heated and DeviceNet™ compatible gauges are available with several tube fittings and in standard pressure ranges from 0.1 to 1000 Torr. |
|
PH1600 Series: Low Pressure, High Flow
FDA Title 21 & USP Class VI Materials
Flows to 250 SCFM N2
Gas and clean steam versions
Ports from 1/2" - 1 1/2" tube ends, sanitary
PH1800 Series: Low Pressure, Very High Flow
FDA Title 21 & USP Class VI Materials
Flows to 1400 SCFM N2
Gas and clean steam versions
Ports from 3/4" - 1 1/2" tube ends, sanitary
PH-2200 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 5 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-2600 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 10 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-3200 Series: Compact, Low Pressure, Medium Flow
FDA Title 21 & USP Class VI Material
Gas and clean steam versions
Tracking version for agitator seals
Gas flows to 50 SCFM N2 |
|
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
SJS Series: Tracking/Pump Applications
Maintains accurate differential pressure when incorporated into a double seal system
Tracks upsets in system pressure and decreases downtime by increasing seal life
42 MW: Welded Diaphragm Instrument Isolator
Isolated and protects the regulator from corrosive process media
Intended for use with our wide range of tracking regulators
Assists in the control of pressure in fugitive emission and/or mechanical seals applications
44-4000 Series: High Flow Cv=2.0 or .7/Positive Bias-Reducing
Captured self-venting standard
Adjustable bias pressures
Compatible with TESCOM electronic pressure controllers
26-2900 Series: Negative Bias-Back Pressure
High Flow
Negative spring bias
Designed for BIBS application
Diaphragm sensed - highly sensitive |
|
| With more than one million BARTON DPU-based instruments in service around the world today, Cameron's Measurement Systems division is a premier supplier of reliable and accurate chart recorders, indicators, switches and pneumatic controllers. Originally developed in the early 1920s, our differential pressure technology features a welded bellows assembly that increases accuracy while dramatically reducing the effects of wear. To facilitate quick and easy repairs all DPU based instruments are supported with pre-calibrated exchange or repaired sub-module bellows assemblies. |
|
MPT 40 Electronic regulator proportional Moduflex
The access to technology proportional just by the actuation of a knob
Description:
* Openings of connection 1/8 `' & 1/4 `'.
* Pressure of maximum entry. 10 bar.
The new electronic regulator proportional regulates quickly with precision and maintains the pressure of exit, without influence of the flow, via an electronic signal of control. Operation with compressed air or inert gas.
Advantages:
* Posting by LED with characters in rougeet of great legibility.
* All controls on the same face.
* Convivial and simple software.
* Standard product which answers all waitings of the customers.
* Compact & light (285 G).
* Fast ultra response time.
* Exhaust full flow.
* Excellent linearity.
* Assembly on rail DIN.
Applications:
Auto industry
* Control of the forces of clamping and welding during the sheet metal assembly
* Control specifies paint by immersion and spraying.
Industry of the packaging
* Control specifies tension for sheets and paper of packaging. |
|
|
