|
|
20-1000 Series: Compressed Natural Gas
Balanced main valve minimizes inlet pressure fluctuations
Piston sensed – highly reliable
Water heat jacket standard
20-1200 Series: High Pressure Hydrogen
Nickel-plated aluminum
Large piston sensor
All regulators tamper-proof
20-1400 Series: High Flow / Low Pressure
Diaphragm sensed – highly sensitive
Dome load spring bias ± 2 PSIG
Captured bonnet design for safety
44-6000 Series: In-Line High Pressure
Balanced main valve design
Positive shutoff seal
Captured bonnet available
Patent pending
44-7400 Series: Pressure Reducing
Ideal for CNG dispensing applications
Several porting configurations available
Spring adjust, high outlet, high flow
|
|
|
|
|
|
The gas pressure regulators (RTP) are designed to reduce natural gas pressure from medium to low one, and to keep the gas pressure rate independent on input pressure and flow changes. The regulators are suitable for domestic as well as for industrial installations.
Description
Single stage
Single stage gas pressure regulators have diaphragm - spring single stage pressure regulator with the lever system control element.
Double stage
Double-stage gas pressure regulators have two stages of pressure reduction, both with diaphragm-spring control.
The RTP gas pressure regulators are equipped with the following safety devices:
* The over-pressure and under-pressure shut-off
* The relief valve
Our regulators meet requirements of standard EN 12 279
We are producing various versions and sizes, as an example we are presenting double stage regulator
RTP 10-M..-..
Technical data
Inlet pressure: 0,1 - 0,5 [MPa]
Adjusted output pressure: 2 [kPa]
Regulation deviation: ¡À0,1 [kPa]
Outlet pressure at no consumption: max 2,6 [kPa]
Safety pressure: 3 - 0,1 [kPa]
O.P.S.O.: 4,5 [kPa]
U.P.S.O.: 1 [kPa]
Volumetric flow: 10 [m3/h]
Volumetric flow: 10 [m3/h]
Relief valve size: Rp 3/8 [inch]
Weight: 1,12 [kg]
Ambient temperature range: -30 to +60 [¡ãC]
Response time: ¡Ü 5 [s]
|
|
Air/gas ratio controls GIK
Governors for gas GDJ
Governors for gas J78R
Governors for gas VGBF
Safety overpressure slam shut valves JSAV
Safety relief valve VSBV
Speed and relief governors VAR, GAR
Variable air/gas ratio controls GIKH
|
|
P38 Gas & Propane Regulator
Balanced pintle design
Exceptional flow capacity
Bubble tight/non-relieving
27 Mbtu/hr (260 scfm)
High volume applications
UL listed
Minimal effect on output pressure from variation of supply pressure
Bellofram Rolling Diaphragm
Product Detail:
The P38 uses a patented balanced pintle design which eliminates unsteady changes in outlet pressure due to inlet pressure fluctuations. The P38 is a spring opposed, diaphragm - operated, non-relieving regulator. The use of a relief valve is recommended for this product in accordance with NFPA 58.
|
|
General description :
System of pressure regulators M 30 RC have been designed for direct dosage of gaseous chlorine under pressure, e. g. for open swimmingpools and tanks at locations where it is not possible to provide an auxiliary power supply. The capacities of the device vary from 0 - 2000 g/h, functioning on the principle of pressure in the chlorine cylinder with manual dosage adjustment.
|
|
|
The pressure reducer is used for single-stage pressure reduction of compressed air and other neutral gases.
|
|
Description:
The SLV Series Signal Lock Valve provides protection in the event of pneumatic instrument signal loss caused by failure of RTU, I/P transducer, pneumatic controller, or other signal generating devices. In the event of instrument signal failure, the SLV-30 will maintain the last position of the control valve and positioner. The Becker SLV-30 can be factory installed or easily retrofit to most existing pneumatic positioner models.
|
|
Extensive technological knowledge accumulated over a long period of
time as a leading designer and manufactured of Integtrated Gas Delivery
Ultra-High Purity (UHP) Valves
Systems and Components, well - integrated and distributed across
multiple industries.
Ultra-Clean Process
CKD delivers high quality products.
|
|
Pressure reducing valves
The pressure reducing valve is a device designed to reduce the pressure of a gas from an initial generally variable value to a final given value at the end of a process.
Primary, secondary and special reducing valves for carbon dioxide, for carbonitrogen and for nitrogen.
Normal and special connections, high pressure flexible pipes, protection and wall fixing plates.
SK or ISPESL approved models.
|
|
|
Gas pressure regulators are necessary to step down gas supply pressure to pressures suitable for various Gas various burner/combustion applications.
|
|
| ... products without technical information |
| |
SYSTEMA introduces the new series of EOLO, suspended warm air heaters able to solve all heating problems, both for total and modular space heating. Compared with traditional heating systems needing a separate cabinet, the new EOLO heaters offer an innovative solution for heating while keeping running costs at a minimum.
This is possible thanks to the fact that EOLOs are completely self-sufficient working units, and that you don?t need to heat up a heat transferring fluid such as water for heating the space. In this way you don't have any needless heat losses.
|
|
These equipment may be connected either with vertical or horizontal vent or through a chimney.
These aerotherms do meet the main requirements of the CE standards requirement related to gas-fired aerotherm.
CAUTION :
These equipment can only be used in sufficiently aerated premises, except where a tight connection is provided.
The proper operation of the aerotherm depends on a correct installation and start-up.
Aerotherm should not be installed in :
- Hazardous areas
- Premises containing vapours of chlorinated combination
- Areas with high contents of inflammable dusts
- Highly humid rooms.
|
|
DESCRIPTION:
Gas domestic hot air generator with leakproof operation and smoke outlet through an extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
The basic equipment has the following elements:
- Leakproof combustion with forced draft.
- Combustion oven designed for obtaining a performance of about 90%.
- Three-speed fan (except for the GAS-40 model, which is one-speed).
- Air admission filters.
- Environment thermostat.
- Air impulsion grid on the upper part (GAS-08-12-15).
FUEL:
Natural gas / LPG
APPLICATIONS:
Any kind of premises with a volume between 190 m3 and 980 m3.
|
|
Hot gas generators fabricated by Unitherm Cemcon are designed for direct air heating performed by a firing system. Air to be heated is either supplied by a dilution air fan or is delivered from process with high or low temperatures or combinations of both.
Unitherm Cemcon provides:
* Hot gas generator engineering for supply or local manufacturing
* brick lining material
* Burner (mono block or special designs) incl. operation valve train and fuel supply system
* Diluton air fan
* HGG field instruments for performance and safety control
* HGG control cubicle
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
