|
|
|
The fine threads of the needle valve permit excellent adjustment for precise control of flow. The flow is restricted in both directions and is adjustable from 0 to the equivalent flow of a 0.025" diameter orifice. The 7-turn adjustment needle valves are available in two models, the standard model and the fine adjustment model. The standard adjustment model has a pin angle of 6° with 10-64 threads; the fine adjustment model has a pin angle of 4° with 10-80 threads.
|
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
LS-V05C
Proportional Pneumatic Control Valve
The LS-V05C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
General Description
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction).
Operating Fluids
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water.
|
|
|
Angle Flow Control valves are designed to provide accurate flow control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant, convenient swivel design and unique needle design all add up to a package that will save time, money and energy when accurate control is needed on pneumatic actuators.
|
|
... fast, accurate, highly-dynamic.
Proportional valves of the tecno series are piezo controled pressure valves with electronic pressure control.
Piezo technology offers highest dynamics with lowest power consumption. High venting and exhaust capacity supplies the main valve. The pressure sensor measures the active output pressure. An integrated electronic automatic controller compares the sensor signal with the electrical set value and regulates the output pressure precisely on the given set value.
These features characterise HOERBIGER Piezo Proportional Valves:
- extremely short reaction time
- virtually infinite resolution
- lowest power input.
|
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”.
|
|
|
The Type-550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output. Its compact housing, accessible ports and easy adjustments provide an ideal answer to applications that are space-constrained. This economical instrument provides precision air pressure regulation to actuators, valves, positioners and other final control elements. An integral volume booster provides high flow capacity, increasing control speed in critical applications.
|
|
|
|
|
|
Beswick Engineering’s "PCFCD" Pressure Compensated Flow Control Valve was selected as the Best Product Winner, in the Motion Control category, of Design News magazine’s 2008 Golden Mousetrap Awards. This accolade was just announced to the public in the September 22nd, 2008 issue of Design News.
The PCFCD-1N1 is designed to maintain a constant flow rate, which the customer can adjust, regardless of upstream or downstream pressure variations. It works with both liquids (incompressible fluids) and gasses (compressible fluids) but is primarily intended for the control of liquids. The pressure regulation is accomplished with a low friction diaphragm mechanism. Beswick has applied for patent protection on this unique valve.
The PCFCD-1N1 sets an industry standard for miniaturization. It is lightweight….tipping the scales at only 48 grams. Customers will find it particularly useful when space, weight, and precise liquid flow control are critical.
The PCFCD-1N1 controls flow rates of 0 to 4.2 gallons per hour of Water (0 to 20 cubic feet/hour of Air). It is especially suited for the control of low flow rates. The maximum rated inlet supply pressure is 500 psig. Both the inlet and outlet ports are tapped 10-32. The valve body is both small and lightweight allowing for convenient in-line mounting without the need for a panel mount thread. The PCFCD-1N1 is currently available in brass. Buna-N is the standard seal material. Fluorocarbon (Vitonâ) is optional.
|
|
12 Series: Miniature Pressure Reducing Regulator
Product of choice for state of the art OEM gas systems. 10 Ra or 5 Ra microinch surface finish. Available in VCR, tube stubs or surface mount, "C" or "W" seal.
|
|
30008
High Flow Filter Regulator Extractor (use for all models)
3 Micron
30003
High Flow Filter Regulator (use for all models)
5 Micron
30002
Low Flow Filter Regulator (use for 0145, 200, 201, 0190 and 602 models)
5 Micron
|
|
|
|
|
|
|
Especially suited for use with Airpot actuators and Airpel cylinders where low friction/low hysteresis, sensitive response, long life, clean operation, and extreme temperature are critical requirements. Offered in both compact and standard configurations for moderate and high flow, Airpot FFR systems are available with standard or precision regulators for precise control and sensitivity. Airpot FFR systems are composed of lightweight aluminum/resin hybrid material built into a compact and modular 40mm x 40mm envelope per component (compact series). Standard and Precision series (with increased low pressure sensitivity) regulators are available; all with hand adjustability and single push lock operation. The precision series offers a pressure range of 0.005 to 0.4 MPa and sensitivity within 0.1% of the full scale. Port connections are available with NPT or G metric threads. Each system is equipped with dual filtration modules that remove particles, dust, oil, moisture and mist down to 0.01 micron. This two stage filtration system is comprised of a 5 micron dust and moisture filter augmented by a 0.01 micron coalescing filter. The long life media transitions from a coarse outer surface to a fine interior structure to reduce clogging prolong life and prevent rust formation. All filters boast a standard corrosion resistant filter bowl guard, one quarter turn filter element removal and a unique O ring slip prevention design. FFR gauges offer highly visible color zone indicators, field adjustable limit marks, flat face design with a non- protruding (standard series, compact and high flow types) gauge embedded in the module made to JIS3 grade with either MPa or PSI readings.
|
|
Features
* High Control Sensitivity of 1/8" water column
* Pressure balanced supply valve
* Separate control chamber
* Aspirator tube design
* Nine pressure ranges available
* Check valve option
* "No yellow Metals" option
|
|
The modular subminiature precision pressure regulators are ideal for instrumentation, medical and industrial applications. They provide the ultimate in regulation of pressure and feature excellent repeatability, a sensitive 20 turn adjustment and miniature size.
Balancing of the valve seat gives an output that is virtually unaffected by changes in supply pressure. Only 0.1 PSI output change with a 10 PSI supply change.
|
|
R119J
high-duty and low-cost
0.2 - 18 bar, ratio 1:1
G1/4 - G2 1/2, 44 000 l/min
|
|
Pressure Regulator
Sizes Available: Miniature Series 1/8", 1/4" NPT, Compact Series 1/4", 3/8", 1/2" NPT, Large Series 1", 1-1/2" NPT
Relieving diaphragm air pressure regulator reduces system pressure to level.
Includes a non-rising plastic knob adjustment.
Maximum Inlet Pressure: Miniature 250 psig, Compact 300 psig, Large 300 psig
Regulated Secondary Outlet Pressure Ranges: Miniature: 5 to 50 psig and 10 to 100 psig; Compact: 6 to 60 psig, 12 to 125 psig, 15-150 psig; Large: 5 to 50 psig and 15 to 150 psig.
|
|
64-2600 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available in two inlet pressure versions, 600 psi and 3,500 psi. For low flow applications. With several outlet pressure ranges up to 500 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections.
|
|
AirTronic
solid industry design, 1% precise
with proportionalmagnet, G1/8 - G1
0 - 0.1 / 50 bar, vacuum, 300 / 6800 l/min
|
|
This proportional pressure regulator with digital control can be configured using a PC software, to optimise its response time and accuracy, while maintaining its reliability and dynamic performance levels.
Integrated functions:
* Digital display
* PID parameters set-up
|
|
|
The Type-100 is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The Type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
|
|
Features
- Control sensitivity of 1/4" water column variation allows use in precision applications.
- A compensating diaphragm lets the regulator remain unaffected by supply
pressure changes.
- Flow of up to 40 SCFM with 100 psig supply allows use in applications with high
flow requirements.
- An aspirator tube compensates downstream pressure droop under flow conditions.
- A separate Control Chamber isolates the diaphragm from the main flow to eliminate hunting and buzzing.
- Unit construction lets you service the Model 30 without removing it from the line.
- Canadian Registration Number (CRN) Certification for all territories and provinces
|
|
General Description
316 stainless steel for the offshore, food, pharmaceutical and allied industries. Provides pressure regulation of compressed air for use in these industries.
- 316 Stainless steel throughout. Large flow. High relief flow. Integral mounting holes. Secure labelling. Tagging facility built in.
- Full range of accessories.
Filter Unit:
- Large 25 micron standard element with manual or automatic drain for the removal of liquids and solids. 5 micron element option available.
Operating Fluids:
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water
|
|
ROSS regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of pneumatic equipment. A compressor may supply
air at 150 psig, but most of the equipment will operate best at lower pressures. A cylinder, for example, may develop sufficient force for its purpose with 50-psig air. Remember that compressed air is costly, so using higher air pressure than necessary is wasteful, and may also shorten the life of the cylinder. A general purpose pressure regulator is the answer for greater economy and efficiency.
|
|
B3000
filter regulator, stainless steel throughout
5 and 50 µm, G1/8 - G1
outlet 0 - 3 / 50 bar, max. 6000 l/min
|
|
Features
* High Flow Capacity
* Standard 5-micron filter
* No "yellow Metals" internal construction
* Epoxy coated finish
* Non-bleed design
* Integral Relief Valve
* Standard Gauge Port
* Filter Dripwell Drain Plug
* Standard Tapped Exhaust
* Soft Relief Seat
|
|
|
The ControlAir Type-850 and Type-860 are compacts unit that provide low-cost, high performance pressure regulation of compressed air (Type 850 and Type 860) or water (Type 860). Designed specifically for the OEM market, these units are ideal for compressed air or water pressure control applications. The highly sensitive diaphragm-operated design delivers accurate downstream pressure by eliminating the problems caused by sticking in piston designs utilized by competitors. A molded rubber supply valve provides accurate regulation and prevents leakage.
|
|
|
A range of electro-pneumatic pressure regulators G 1/4 and G 1/2 which, by means of an integrated electronic control system and pulse width modulated solenoid valves, controls the output pressure proportionally to an internal feed-back through an integrated pressure sensor.
|
|
EPDN SERIES ELECTRONIC PRESSURE REGULATORS
Very fast response times
Accurate output pressureExcellent linearity and hysteresis
Robust industrial design
Quick, full flow exhaust
Digital disply indicates output pressure
M12 electrical connector
|
|
Maximum pressure: 18 Bar
Temperature range: 0-60° C
Margin of preset pressure: 1-4 bar /-0.3 bar
5-8 bar /-0.4 bar
Weight: 82 g
Material: Housing: Zinc
Other parts: Brass, nitrile rubber,stainless steel
The In-Line Regulator is a non-releaving preset regulator. The pressure has been set by the factory and cannot be changed. This secures that nobody can change the pressure specified.
|
|
|
|
