|
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
The PRS6 is a three-way pressure reducing valve that has been developed to give reduced pressure in a particular part of the hydraulic system. The valve maintains the secondary pressure setting constantly, regardless of pressure variations on the primary side. Common applications include pilot circuits in hydraulic and electro-hydraulic servo systems.
Compact and easy to install
Easy to adjust within respective pressure range
Can be factory set and sealed to prevent unauthorized pressure changing
Highly suited for use as a reducing valve in pilot circuits where the pilot pressure is taken from the main circuit
|
|
|
|
|
|
High tech and sturdy air operated valve, with a floating
plug seal, meeting stringent use criteria.
An extra thick body of the actuator and of the valve, ensuring a good resistance to mechanical and thermal distorsions.
A modular design enabling the following configurations:
Shut off valve DCX3 L
DCX3 T
DCX3 X
Divert valve DCX4 L/L
DCX4 T/L
DCX4 L/T
DCX4 L/X
PFA seals quality ensures a complete sealing at high temperature and a good resistance to aggressive products.
Plastomer seal can be replaced by elastomer seal
Single or double acting connection
With plastomer seal, vertical setting up (especially for DCX4)
Dimensions 1” - 1-1/2” - 2” - 2-1/2” - 3” - 4” - 5” - 6” Material
Body: 316L stainless steel
Shut-off unit: 316L stainless steel
Manual or automatic operating devices: 304 stainless steel
Plug seal: PFA and elastomer
Stem seal: viton, EPDM, silicone
Options
• Signal back equipment on the top of the actuator
• Sterilization of the stem through an upper guide bearing
• External = 47 RA max (150 grit)
• Internal = 32 RA max (180 grit)
Upgraded finishes upon request:
Surface Finish
Variants
Plug and body machined for a metal to metal sealing (without seal)
Elastomer sealing (specific plug with viton, EPDM o-ring)
Manual operator device (instead of the actuator
Tank bottom type
Long stroke valve available upon request
|
|
|
|
|
|
Product description
- Eaton® Flow Dividers are available in priority, proportional, variable and load sensing
versions with a wide range of standard flow ratings and relief settings.
- Eaton load sensing priority valves provide dependable flow on demand for load sensing steering, braking or other priority functions while allowing excess flow to be used for auxiliary functions.
- These products can be used in virtually any mobile application.
Benefits & Customer Values
- Eaton's global leadership in the Steering Unit is a driver for LS Priority Valves
- Used with fixed or variable displacement pumps, a dynamic signal system increases machine performance and stability.
- LS priority valves available as In-Line or Bolt-On configurations
- Flow dividers can be integrated into other components including gear pumps, limiting the need for additional plumbing.
- These products can be used in virtually any mobile application.
Specs
- Priority Flow Dividers
- Rated pressure up to 195 bar/2800psi
- Rated flow up to 175 LPM/45GPM
- LS Priority Valves
- Inlet & EF pressures up to 310 bar/4500psi
- CF pressure & Max CF relief setting 276 bar/4000psi
- Rated flow up to 240 LPM/63GPM
|
|
Flow-control-valve
Flow-control-valve lor direct mounting. Optional: Flow-control combined with ball-valve Mounting position: all directions Medium: HLP46
|
|
These valves control the reciprocating and rotating speed of hydraulic actuators, A variety of flow control valves including pressure and'or temperature-compensated Mow control valves is available.
Flow Control Valves/Flow Control and Check Valves
These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid). They control the speed of the actuator precisely. The valves with an integral check valve allow a controlled flow and reverse free flow. Repeated resetting can be made easily with a digital readout.
|
|
Various type of pressure control valves are available, from relief valves to pressure switches, to control the pressure at suitable level in the hydraulic system.
Low Noise Type Pilot Operated Reliel Valves
Pilot operated relief valves here have been particularly developed as low noise type. To protect the pumps and control valves from an excessive pressure, the valves are used to control the pressure in the hydraulic system to constant level. The remote control and unloading can be done by using the vent circuit.
|
|
|
The fine threads of the needle valve permit excellent adjustment for precise control of flow. The flow is restricted in both directions and is adjustable from 0 to the equivalent flow of a 0.025" diameter orifice. The 7-turn adjustment needle valves are available in two models, the standard model and the fine adjustment model. The standard adjustment model has a pin angle of 6° with 10-64 threads; the fine adjustment model has a pin angle of 4° with 10-80 threads.
|
|
LS-V05C
Proportional Pneumatic Control Valve
The LS-V05C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
General Description
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction).
Operating Fluids
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water.
|
|
The miniature Preset Flow Control is ideal for many applications involving pneumatic systems, including the control of cylinder speed.
The operation of the flow control is based on the movement of a small disc. The flat surface on one side of the orificed disc seals and permits flow through the orifice. The amount of flow permitted in the reverse direction is determined by the orifice size. In the forward direction full flow is permitted. The flow controls design allows a maximum supply pressure of 75 PSI with a minimum cracking pressure of less than 10” H2O. Orifice sizes are available from .004” to .040”.
|
|
26A: Small Pressure Regulators, 2-Way
Description:
Series 26A Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using water and No. 2 fuel oil. It consists of a brass body construction with NPT threaded female inlet and outlet connections, 1/4 in. 2-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers are recommended. Series 26A has an oversized orifice and is ideal for use on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. Maximum Working Pressure: 300psi (21 bar).
|
|
Designed to precisely control the flow of adhesives and sealants during automated dispensing applications, this compact and lightweight valve mounts easily onto either the end of a robot arm or an XY table.
|
|
Types:
P.C. Flow Regulator
P.C. Flow Control
Priority Style P.C. Flow Regulator
Compensator Valves
|
|
MODELS :
V2FIC02 Mounting (subplate)
V2FIC03 Mounting (subplate)
SIZES : 3/8 " TO 3/4"
Max. Pressure : 500 psi(350 bar)
FLOWS : 13 - 29 gpm / 50 - 110 lpm
|
|
A breakthrough lightweight 2multi-port valve that provides high-flow processing in single, duplex or triplex configurations.
Modularly expandable, allowing for the addition of extra tanks to meet increased demand
Elite Smart Start, the most advanced controller on the market today
Certified to NSF-61 standards
Robust, non-metallic design
Unique start signal is easily integrated into complex control systems
Capable of co-current or countercurrent regeneration of ion exchange
High backwash flow rates allow for effective backwashing of filter media.
|
|
APPLICATION:
To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
OPERATION:
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.
|
|
|
Flow rate control valve for automatic regulation of a constant flow rate in the case of changing supply pressures.
|
|
- Adjustment Options for FC, FR, NV, MR Series Valves (Tech. Ref. Info.)
- Needle Valves and Rotary Flow Control
- Flow Controls, Free Flow
- Flow Regulators, Pressure-Compensated, Fixed Setting
- Flow Regulator, Restrictive, Adjustable
- Flow Regulators, Pressure-Compensated, Priority Bypass, Fixed Setting
- Flow Regulators, Pressure-Compensated, Adjustable
- Flow Regulators, Fixed Orifice, Bi-Directional
- Flow Controls, Bypass, Adjustable Orifice
- Flow Regulators with Pressure Relief
- Pressure Compensators
- Pressure Compensators, Load Sensing
- Flow Dividers / Combiners
|
|
- MODEL: RF-G02
- MAX. PRESSURE PSI: 3000
- PRESSURE ADJ. RANGE: 100-1000, 500-2000, 1000-3000
- RATE FLOW LPM: 16
- BOLT METER: M5*40L 4 PCS
|
|
- Pressure Control Adjustment Options (Tech. Ref. Info)
- Motion Control Valves
- Relief Valves, Poppet-Type
- Relief Valves, Pilot-Operated, Spool-Type
- Relief Valves, Bi-Directional
- Cross-Over Relief Valves
- Thermal Relief Valve
- Pressure Reducing / Relieving Valves
- Sequence with Pilot and Internal Vent
- Sequence with Pilot and Drain
- Sequence with External Pilot
- Sequence, Kick-Down
- Unloading Pilot
|
|
|
Angle Flow Control valves are designed to provide accurate flow control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant, convenient swivel design and unique needle design all add up to a package that will save time, money and energy when accurate control is needed on pneumatic actuators.
|
|
¡ÜFor using gases and liquids
¡Ü Inlet pressure:1.5 MPa maximum
¡Ü Adjustable outlet pressire in ranges:0.01~0.2 MPa (0.1~2 kg/cm©÷); 0.05~0.7 MPa (0.5~7 kg/cm©÷)
¡Ü Operating temperature:-5 to 60¢ªC
¡Ü Diaphragm material:Viton with PTFE lining
¡Ü Body material:SS316
¡Ü Seal material:PTFE
¡Ü Handle wheel material:SS
¡Ü Effective flow area:8.0mm
¡Ü CV:0.6
¡Ü All ports are standard:¨ö"NPT female
|
|
Pressure Reducing Valves
Bronze body, with balanced seat,
disc with NBR seal, pressure gauge connection G1/4,
inlet pressure: up to max. 25.0 bar,
outlet pressure: 1.5 up to 8.0 bar
greatest reducing ratio: 10 : 1
Part No. 08010.X.0000
Female thread connection (G) acc. to ISO 7-1 Rp
Applications:
Suitable for compressed air, nitrogen and similar non-inflammable, non-toxic gases.
Working temperature: -10°C / +14°F (263K) up to +75°C / +167°F (348K)
|
|
characteristics
ports SPB threads G 3/8
media gaseous - liquid
operating time ms < 200
media temperature °C 0 to +60
ambient temperature °C 0 to +50
approvals
mounting
power consumption DC < 0,7 A
control signals UE 0-10 V (RE 10KΩ)
protection IP65 acc. DIN 40 050
energized duty rating ED 100% (observe the connection conditions accordingly)
connection plug with 7 contacts / wire diameter 6-8 mm
|
|
All pressure reducing valve bodies are made of bronze. Due to their design, they are not affected by scale or dirt, and do not need any maintenance.
They are suitable for cold and hot water up to 80°C for maximum upstream pressure of 25 bar and reduce pressure between 0.5 and 7 bar.
They can be installed in any position if flow direction stipulated by the arrow is respected.
They can be fitted on compressed air, neutral gases and fuel oil at ambient temperature circuits.
The ranges of figures 7, 8, 9, 10 and 11 are in accordance with the European standard EN1567. Series 9, 9 bis,11, 11bis and 11 bis MA fulfill higher specification controlled by NF label.
|
|
The Porter Model EPC Electronic Proportional Control Valve is an electromagnetically-actuated, proportional control valve designed for use in closed loop flow or pressure control systems. When coupled with a flow sensor or pressure transducer and a proportional electronic controller, Model EPC is capable of providing steady and precise control of gas flow rates or pressures. The Model EPC is a DC-driven, normally-closed valve which includes an elastomeric valve seat to provide bubble-tight shut-off. A broad range of flow coefficients (Cv’s) is available for either flow or pressure control.
The Model EPC is offered with either integral compression fittings for in-line mounting or as a manifold-mount version. To allow design and user flexibility, custom configurations in OEM-scale quantities are also available.
|
|
KOFLOC 2203
The KOFLOC Variable Secondary Pressure Flow Controller Valve MODEL 2203 SERIES is a control valve for precise control of minute gas flow and maintaining constant flow under fluctuating secondary pressure (outlet), provided the supply pressure remains constant. This characteristic makes it a must-have preliminary valve in many flow control mechanisms. Constructed using high precision parts, the design of the MODEL 2203 SERIES transforms the rotation of the regulating screw to into linear motion of the needle without subjecting it to gaps and vibrations produced by the screw, to ensure stable and even control of minute flow.
FEATURES
♦ Excellent flow stabilization
♦ Clean construction
♦ Independent from secondary pressure fluctuations
APPLICATIONS
♦ Gas chromatography
♦ Environmental analysis
♦ Atomic absorption spectrometry
♦ Gas mixing
♦ R&D
♦ General industrial use
|
|
|
|
|
|
KOFLOC 2412/2412M
The KOFLOC Precision Needle Valve MODEL 2412 SERIES is designed to control minute flows with precision and ease, controlling minute flow stably and accurately, as low as 0.5 ML/MIN. It has been widely used in numerous applications from general industrial applications to analytical equipment such as AAS (Atomic absorption spectrometer). The needle orifice of the MODEL 2412 SERIES has a temperature compensating structure (US P.A.F.) achieving the characteristic of 0.3%/˚C for gas temperatures between 15 ˚C to 35˚C. MODEL 2412 SERIES includes 15 different needle valves to offer optimum flow control corresponding to various flow levels MODEL 2412M SERIES with Multi-Dial is a precision needle valve with a radial gauge to give simple means to approximate flow volume
FEATURES
♦ Accurate control of minute flow
♦ Wide needle variation
♦ Non-rotating needle
♦ Wide operating temperature range
APPLICATIONS
♦ Atomic absorption spectrometer
♦ Burn control
♦ Research and development
♦ Air sampler
♦ Filter testing
♦ Burn control
(2412M)
♦ Can be used as a substitute for a flowmeter
♦ Detection of flow pass resistance fluctuations
|
|
|
|
