|
|
165855 Professional cylinder Pressure detection
Intended specifically for use with the Bently Nevada 3500/77M Recip Cylinder Pressure Monitor when real-time, continuous monitoring of cylinder performance is required on reciprocating compressors. It is able to withstand the extreme temperatures and pressure cycling of reciprocating professional compressor cylinders while providing reliable measurements. It also incorporates innovative materials and construction techniques that allow it to survive in the harsh chemical environments typically encountered in reciprocating compressor applications, such as hydrogen sulfide (H2S). The transducer has undergone extensive testing and is unique in the industry, carrying a 3-year warranty. It is available with a number of adapters, allowing it to be used with many existing pressure indicator cocks (e.g., Kiene* valves). |
|
Low Cost OEM/Industrial Transducers - 1000 Series
This flexible product is aimed at OEM manufacturers who require a high quality, cost effective pressure sensor specification, designed to meet their own specific application requirements at an economical cost. It is manufactured in high volumes using a standard "core" principle which readily enables variation of the final product configuration.
Using just a few established core sensor elements, a comprehensive range of customised sensors has been established to meet a wide spectrum of industrial applications. In excess of 2000 individual configurations are available and just a small selection is shown on the centre pages of this document. Whatever sensor configuration or enhancement you may require, the 1000 Series provides a cost effective solution. |
|
Low Differential Manufacturers of pressure transmitters (current) - LPX 9000 Series
This rugged design ensures high performance with long term reliability and stability.
Excellent thermal and long term stability characteristics make the LPX/LPM 9000 Series ideally suited to a wide range of high precision applications, from leakage detection to motor testing rigs, low flow measurement, and many other critical pressure measurements.
Features & Benefits:
Ranges from ±0.04 inH2O to ±300 psid
Accuracy better than ±0.1% FS BSL
Line pressure from vacuum to 3000 psi
Choice of wetted materials
Unidirectional or bidirectional
Excellent stability characteristics
Compact and rugged design
Intrinsically safe version available
|
|
Honeywell Sensotec manufactures a wide range of wet/wet and wet/dry differential manufacturers of pressure sensors. Rugged stainless steel construction with mechanical overload stops can handle the most demanding applications. These units cover ranges from 0.5 psid to 10,000 psid and deliver accuracies up to 0.1%. Outputs include 4-20mA, 0-20mA, 0-5V, 1-10V, 0-2VDC, and ±5VDC. RS-232 and RS-485 digital output is also available.
|
|
• Ranges from 0/+100 Pa to -2000 mbar/+2000 mbar (according to model)
• Configurable intermediate and centre zero ranges
• Air velocity and airflow functions (optional)
• Simultaneous display of 2 parameters
• 2 outputs 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6 A / 230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• ABS IP 65 housing, with or without 2-line backlit display
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate |
|
EDP1
The differential pressure measurement cell is manufactured
with two separate ceramic detection in thick-film technology.
The industrial bridge signals are compensated for the relevant cell
and are converted by an integrated adc to a
4..20 mA signal which is linear to the differential pressure.
The values from the separate cells are accepted by a 14-bit
professional converter and microcontroller and converted into the
difference of the pressures. The microcontroller also
permits special output signals to be emploied (please
inquire). Only high quality materials are exposed to the
liquid. ( s.s,Viton,Al2O3)
two-wire model for industrial applications
ideally suitable for liquid/liquid applications
can also be used for high differential pressures
high chemical resistance through the use of high quality materials |
|
Differential pressure sensors manufacturers form Sensirion measure thanks to the unique CMOSens® Technology in air and dry gases extremely accurately and offset-free! The digital ASP and the analog SDP family offer extremely high accuracy and resolution, especially in ultra low pressure ranges.
The small and cost-effective design make them an ideal match for price-sensitive solutions, especially in medical and HVAC applications. Reliability, speed and sensitivity have made them the first choice in new medical designs and redesigns.
CMOSens® offers unsurpassed long-term stability. Each Sensirion differential pressure device is individually callibrated and temperature compensated due to internal intelligence.
|
|
The MLX90210 is a discrete micromachined
Pressure sensor specifications IC suitable for pressure ranges
Between 0 to 1.0 Bar. The pressure medium must be dry and non-corrosive, such as air.
The circuit is a piezoresistive bridge which is realized in silicon through a special micromachining process. As pressure is applied to the bridge, a differential voltage change is seen across the Vout pins, while a bias voltage is applied to the Vexc pins.
The MLX90210 is a versatile pressure sensor solution which can be directly interfaced with other Melexis ICs such as the MLX90308, which provides amplification, signal conditioning as well as the bias current to supply the sensor itself.
|
|
Honeywell Sensing and Control's piezoresistive silicon industrial pressure sensors contain sensing elements that consist of four piezoresistors buried in the face of a thin, chemically-etched silicon industrial diaphragm. A pressure change causes the diaphragm to flex, inducing a stress in the diaphragm and the buried resistors. The resistor values change in proportion to the stress applied and produce an electrical output. These sensors are small, low cost and reliable. They feature excellent repeatability, high accuracy and reliability under varying environmental conditions. In addition, they feature highly consistent operating characteristics from one sensor to the next, and interchangeability without recalibration.
Best Used For:
Medical and HVAC devices, data storage and gas chromatograph equipment, process controls, industrial machinery, pumps and robotics.
|
|
A New Generation of Suppliers of pressure transmitters
As a leader in the pressure measuring field, FUJI ELECTRIC has achieved an installed base of about 500 000 FCX industrial transmitters throughout the world. Thanks to its experience, and in order to satisfy the users demand, FUJI ELECTRIC has developed two new products:
The FCX-AII series, aiming at high-accuracy and excellent performance, and the FCX-CII series, featuring compactness and low-cost operation.
Each of these series offers a wide measuring range and a full variety of options so that the most applicable model can be selected.
|
|
Board Level
Board level, or PCB-mountable, pressure sensors manufacturers use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Sensor packages include dual in-line, TO-8, TO-5, and disposable blood pressure sensors.
Transducers
Measurement Specialties produces a broad range of amplified output supplier of pressure transducers for everything from high volume OEM use to high accuracy applications. Measurement Specialties proprietary Microfused™ pressure transducers are designed for OEM applications that require high reliability in harsh conditions. Measurement Specialties' high performance line includes Ultrastable transducers for instrumentation, foil strain gage transducers for severe environments and miniature transducers used for automotive and aerospace testing.
Sensor Elements
Measurement Specialties oil-filled stainless steel pressure sensors are suitable for use in harsh environments of liquids or gases. Many feature proprietary Ultrastable piezoresistive silicon die technology for long term reliability.
Liquid Level Transducers
Measurement Specialties' Ultrastable transducers in special packaging for tank or fully submersible liquid level measurement. |
|
Description
The fibre optic manufacturer of pressure sensor P-01 consists of a membrane that is connected to a FBG mounted under pre-strain. When pressure is applied to the membrane, the membrane will deflect resulting into a change in the FBG strain value and hence also in a change of the reflected FBG wavelength.
The head of the pressure sensor is foreseen of a thread that allows connecting the sensor to pipelines, cocks and vessels.
In order to compensate for temperature influences, a high resolution manufacturer of temperature probe is integrated within the housing.
The housing is made of stainless steel and is terminated with an optical interconnection using a plastic tubing. Tubing lengths and manufacturer of connector can be specified following the needs of every application.
The sensor is single connectorised but can on request also be designed for series configurations.
Features
The pressure sensor P-01 can measure pressure and temperature with a resolution of 0,05% Full Scale and 0,1 °C respectively and an accuracy of 1% Full Scale and 1 °C respectively. The pressure range can be chosen between 1 and 150 bar.
Applications
The pressure sensor can be applied for flow control in all sorts of pipelines and liquid level measurements in reservoirs and others. |
|
| The SPX2280 is a smart industrial 4 - 20 mA manufacturer of pressure transmitter designed for use in hazardous locations. The SPX2280E has explosion proof approval for Class 1, Division I, Groups A, B, C & D, Class 2, Division II/III, Groups E, F & G. The explosion proof model employs a conduit fitting. The SPX2280S is approved for ATEX II 2 (1) G 100a and Intrinsic Safety for Eex ia IIC T4/T6. The intrinsically safe and ATEX models can be supplied with either a conduit fitting or a variety of professional connectors. The standard SPX2280 is an all welded construction that features a 1/2-14 NPT male thread for installation. Models are available in PSIG, PSIA and PSIS. Optional pressure professional fittings and electrical terminations are available. |
|
| Trafag manufacturers of pressure transmitters are used for the electronic measurement and evaluation of pressure values. They are available in many different versions with regard to pressure and electrical connections, measurement procedures, electric output signals, and approvals (CE, Ex, Shipbuilding, Railways). Two different sensor technologies are available, namely thin-film-on-steel (weld-sealed design without O-rings) and thick-film-on-ceramic. Trafag also develops and manufactures products specifically to customer requirements. |
|
Honeywell offers a wide range of sensors for use with media compatible stainless steel. Most sensors use bonded strain gage technology, making them very resistant to the effects of shock, vibration and hostile environments. Measurement types include absolute, gage and sealed gage. A wide variety of pressure ranges, port styles, termination types and outputs is available. Package types range from miniature surface mount sensors to high-end stainless steel isolated professional transmitters used for stringent process governor. All products are fully compensated and tested to meet specifications before shipment.
Best Used For:
Compressors supplier, hydraulic controls, transportation, aerospace, agriculture, refrigeration and general industrial.
|
|
DP-100 series: High resolution pressure sensor with dual 3-colour display
Highly accurate and reliable pressure sensor with multifunction (analogue voltage output operation indicator). 'Current value' and 'threshold value' can be checked at the same time to improve ease of operation and visual checking. A clear, 12-segment display makes this easy. With the unique copy function, man-hours and human errors are reduced. Various types of applications can be realised thanks to three output modes and a wide range of modules allowing pressure from -1 to +10 bars to be measured. New: M8 interconnector type available.
Characteristics:
High resolution and repeatability
Low and high pressure types
Dual 3-colour display (red, green, orange); industry first
Analogue output
Current and threshold value in one view
Copy function; new global standard
Three operation modes, easy setting
Equipped with an ECO mode
Easy installation
M8 connector type
Accessories:
Connector
Connector attached cable 1, 3, 5m
Sensor mounting bracket
Panel mounting bracket
Front protection cover |
|
The sensor is suited for torsion measurements and the measurement of reaction moments for orthopaedic industrial measuring devices. It is applicable for measurements of friction forces.
The strain gage full bridge measure the torsion movement appearing in the tube of the lattice structure. |
|
Process manufacturer of pressure transmitter with CERTEC®
Suitable for pressure measurements of gases, vapours and liquids
All advantages in an overview:
- dry, ceramic-capacitive sensor element
- 4 ... 20 mA two-wire system with a supply voltage of 12 ... 30 V DC
- characteristic deviation 0.5 %
- long-term stability 0.1 %/2 years
Measuring cell: CERTEC® high overload resistance
Measuring range: -1 ... +60 bar (-100 ... +6000 kPa)
Deviation in characteristics: 0,5
Product temperature: -40 ... +100 °C
Standard signal: 4 ... 20 mA two-wire |
|
DMS, STRAIN-MATETM or piezoelectric technique: we control technologies, the processes of measurement and their integration to solve your specific applications of force, pressure or deformation.
Used in hydraulic and pneumatic applications or in laboratory, our robust pressure pick-ups measure with more the utmost precision, even during their use in the industrial environments hardest. All the range of our pressure pick-ups is deliverable with connections and output signals frequently used or specific execution. |
|
|
|
