|
|
Honeywell offers a wide range of sensors for use with media compatible stainless steel. Most sensors use bonded strain gage technology, making them very resistant to the effects of shock, vibration and hostile environments. Measurement types include absolute, gage and sealed gage. A wide variety of pressure ranges, port styles, termination types and outputs is available. Package types range from miniature surface mount sensors to high-end stainless steel isolated transmitters used for stringent process control. All products are fully compensated and tested to meet specifications before shipment.
Best Used For:
Compressors, hydraulic controls, transportation, aerospace, agriculture, refrigeration and general industrial.
|
|
0–15psi to 0–500psi Corrosion resistant stainless steel housing
Weatherproof integral electrical connector Absolute, gage, and sealed gage optionsLow total error; ±1.5% full–scale accuracy (-20°C to 85°C)
Wide operating temperature range (-40°C to 135°C) Weathertight connector Small size EMI Protected to 100V/m Lowest cost solution
Wide range of applications Rugged and reliable Several mounting options
High reliability in noisy environments
|
|
_ LEVEL TRANSDUCERS
_ LEVEL SENSORS
_ PRESSURE TRANSDUCERS
_ PRESSURE SENSORS
Capacity until to 5.000 Psi.
Operating temperature from -40°C to +85°C
Escape 16bit or until to 10Vdc.
Precision 0.25% FSO.
Formats are for assembly on card that not
|
|
IPS’ intelligent, two-wire transmitters provide precise, reliable measurement of absolute pressure and transmit a 4-20 mA, 1 to 5 Vdc or digital output signal with a superimposed HART digital signal for remote configuration and monitoring.
Features:
- Superior pressure transmitter performance
- Rugged and dependable
- Choice of electronic modules
- LCD indicator / pushbutton configurator
- Choice of mounting styles
- SIL2 TÜV Rheinland Certified per IEC 61508
|
|
Baratron® Absolute Process Measurement
Pressure Measurement and Pressure Control with Capacitance Manometers at Ambient Temperature
From the industry leading 600 series to the e- Baratron® digital manometer family of products, MKS offers best-in-class process manometers. Our standard Inconel® all-welded sensor assemblies maximize resistance to corrosive process gases and ensure safe operating environments. Application specific products and sensors are focused on providing long term reliability and stability resulting in high throughput, up-time, and yields.
|
|
Analog pressure and differential pressure transmitters:
types:
PCE-28- pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gasses, vapours and liquids
- measuring range: from 10mbar up to 1000bar
- output signal: 4-20mA, 0-10mA, 0-2,5V
- accuracy: 0,2%
- Process connection: 1/2NPT, M20 x 1,5; G 1/2";
flush diaphragm (G 1/2"; G 1"; M30 x 2); diaphragm seals;
PRE-28 - differential pressure transmitters are applicable to the measurement of differential pressure transmitters of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor
- measuring range: from 16mbar up to 25bar
- output signal: 4-20mA, 0-10mA
- accuracy: 0,25%
|
|
Due to internal microprocessor electronics, the PDCR 3500 can also give a digital pressure output in engineering units via RS485. The RS485 is also used for re-calibration and housekeeping activities such as serial number retrieval and diagnostics. The PDCR 3500 is therefore two transducers in one. Customers can use either the analog or digital output (or both) depending on the requirements of their application.
Features & Benefits:
Digital Output
Extensive electronic self tes
Unit ID - Inventory control (QS-9000)
32 Sensors on single RS 45
Analog Output
±0.05% FS per year stability
Total accuracy: ±0.1% FS for -65° to 250°F
Response time >4 KHz
|
|
|
Senses pressures of fluids/gasses, on engines and other industrial equipment. Models are available to detect discharge pressure across compressors and pumps, as well as filter clogs and pump cavitation.
|
|
Low Cost OEM/Industrial Transducers - 1000 Series
This flexible product is aimed at OEM manufacturers who require a high quality, cost effective pressure sensor, designed to meet their own specific application requirements at an economical cost. It is manufactured in high volumes using a standard "core" principle which readily enables variation of the final product configuration.
Using just a few established core sensor elements, a comprehensive range of customised sensors has been established to meet a wide spectrum of industrial applications. In excess of 2000 individual configurations are available and just a small selection is shown on the centre pages of this document. Whatever sensor configuration or enhancement you may require, the 1000 Series provides a cost effective solution.
|
|
Low Differential Pressure Transmitters (current) - LPX 9000 Series
This rugged design ensures high performance with long term reliability and stability.
Excellent thermal and long term stability characteristics make the LPX/LPM 9000 Series ideally suited to a wide range of high precision applications, from leak detection to motor test benches, low flow measurement, and many other critical pressure measurements.
Features & Benefits:
Ranges from ±0.04 inH2O to ±300 psid
Accuracy better than ±0.1% FS BSL
Line pressure from vacuum to 3000 psi
Choice of wetted materials
Unidirectional or bidirectional
Excellent stability characteristics
Compact and rugged design
Intrinsically safe version available
|
|
|
|
|
|
DP-100 series: High resolution pressure sensor with dual 3-colour display
Highly accurate and reliable pressure sensor with multifunction (analogue voltage output operation indicator). 'Current value' and 'threshold value' can be checked at the same time to improve ease of operation and visual checking. A clear, 12-segment display makes this easy. With the unique copy function, man-hours and human errors are reduced. Various types of applications can be realised thanks to three output modes and a wide range of modules allowing pressure from -1 to +10 bars to be measured. New: M8 connector type available.
Characteristics:
High resolution and repeatability
Low and high pressure types
Dual 3-colour display (red, green, orange); industry first
Analogue output
Current and threshold value in one view
Copy function; new global standard
Three operation modes, easy setting
Equipped with an ECO mode
Easy installation
M8 connector type
Accessories:
Connector
Connector attached cable 1, 3, 5m
Sensor mounting bracket
Panel mounting bracket
Front protection cover
|
|
|
The FOP-C is a fiber optic pressure sensor designed for general industrial applications in harsh and hazardous environments, where very high pressure conditions can be found.
|
|
The sensor is suited for torsion measurements and the measurement of reaction moments for orthopaedic measuring devices. It is applicable for measurements of friction forces.
The strain gauge full bridge measure the torsion movement appearing in the tube of the lattice structure.
|
|
Mini Pressure Transmitters
Anderson's newest sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. This product replaces the two piece fractional transmitter with a very compact, single piece transmitter.
|
|
|
The Freescale MPXY8040A is an 8-pin tire pressure monitoring sensor which is comprised of a variable capacitance pressure sensor element, a temperature sensing element, and an interface circuit (with a wake-up feature) all on a single chip. It is housed in a Super Small Outline Package (SSOP), which includes a media protection filter. Specifically designed for the low power consumption requirements of tire pressure monitoring systems, it can combine with a Freescale remote keyless entry (RKE) system to facilitate a low-cost highly integrated system.
|
|
The Activa Sensor Array provides fl ow,
temperature and pressure signals in a compact
unit that requires only one hydraulic line break.
Each sensor transmits an output signal that is
easily integrated with PCs, PLCs, recorders or
panel displays. Signals can also be transmitted to
Flo-tech’s F6700/F6750 Series digital displays.
|
|
This pressure-measuring cell is based on ceramic technology, developed by Huba Control and used for the last 10 years, in millions of applications, used in combination with a unique integrated electronic design, this gives the type 513 series a high degree of accuracy for all temperature ranges.
This technology with an amplified ratiometric output signal, supports the direct assembly without the need for the user to adjust for temperature or pressure.
|
|
The P571 pressure sensor is a high stability, small diameter, stainless steel pressure sensor intended for use in pressure transducers and other OEM pressure measurement applications. Its thin-film metal strain gauge circuit enables a long-term stability of better than 0.1% per year. Options include Hastelloy, 500 Vac insulation resistance, integral sputtered thin-film RTD, as well as various optional specifications on TC Zero and TC Span.
The unique design can be used with an infinite variety of pressure fittings, which can be supplied by SMD or provided by the customer. Ideal for pressure transducers and transmitters as well as other pressure measurement applications including process control, hydraulic systems, general industrial, down-hole, pressure calibrators, Cenelec applications, aerospace, automotive and more.
|
|
|
Omron's comprehensive offering of Sensors is also complemented with a family of pressure sensors that offer not only simplicity of use, but also with the flexibility and combination of functionality, usability combined with compact size. Ranging from mini-cube style sensors to high precision sensors, Omron is also able to offer multi-channel pressure sensing solutions.
|
|
These pressure transducers use the Series 10 OEM pressure sensor fully compensated and calibrated for operation at 10 VDC.
The well proven core sensor is an integrated silicon strain gauge bridge, encapsulated within a stainless steel case with a welded, isolating diaphragm (for a more detailed description, see data sheet for the Series 10).
A G 1/4" male pressure port is welded as standard to give the very best in media compatibility and integrity - no "O"-rings or silicon are in contact with the media at all.
Class 0,25% / 0,5%.
|
|
|
DMS, STRAIN-MATETM or piezoelectric technique: we control technologies, the processes of measurement and their integration to solve your specific applications of force, pressure or deformation. Used in hydraulic and pneumatic applications or in laboratory, our robust pressure pick-ups measure with the highest precision, even during their use in the industrial environments hardest. All the range of our pressure pick-ups is deliverable with connections and output signals frequently used or specific execution.
|
|
A New Generation of Pressure Transmitters
As a leader in the pressure measurement field, FUJI ELECTRIC has achieved an installed base of about 500 000 FCX transmitters throughout the world. Thanks to its experience, and in order to satisfy the users demand, FUJI ELECTRIC has developed two new products:
The FCX-AII series, aiming at high-accuracy and excellent performance, and the FCX-CII series, featuring compactness and low-cost operation.
Each of these series offers a wide measuring range and a full variety of options so that the most applicable model can be selected.
|
|
Electronic pressure sensors are used to measure pressures in hydraulic systems. Function and design depend on the particular operating conditions. In order to meet these operational requirements, HYDAC offers a wide range of products from miniature pressure transmitters to customised multi-channel pressure switches.
Pressure transmitters detect the pressure and convert this into a proportional output signal.
Electronic pressure switches detect the pressure and switch a signal according to the pre-set parameters.
|
|
Differential Pressure Sensor PMP
Electronic Pressure Switch PDD
Pressure Transmitter with LED-display PDA
Pressure Sensor for harsh operational conditions PNK
Pressure Sensors Thin Film , Front-Flush Membrane SEN-33
Pressure Sensors with Ceramic Element SEN-8
Piezosistive Pressure Sensors, Internal membrane SEN-32
Digital Panel Indicators DAG
Plug-On Display AUF
Hand-Held Pressure Gauge HND-P
Universal Bussystem KOBUS
|
|
|
|
|
|
General description:
The DP3 series of pressure sensors offers a high-resolution, high-speed, and high-accuracy solution for all of your pressure sensing needs. A 2.5ms response time is achieved with excellent repeatability and temperature characteristics. A 10mm red LED display allows for good visibility in bright and dim ambient conditions. Simple key setup allows for quick initialization and threshold value settings. The display can be changed between six pressure units, allowing flexibility in many applications. The DP3 series incorporates 2 comparative outputs (NPN or PNP) as well as one analog output.
Several integrated output modes allow for enhanced usability:
- Hysteresis Mode
Offers free-range hystersis control for optimal hysteresis setting.
- Window Comparator Mode
This output mode provides a user determined pressure window in which the output is either ON or OFF. This is perfect for applications in which there are high and low pressure limits.
- Leak Test Mode
Utilizes both outputs to offer stable leak detection in applications such as bottle manufacturing.
|
|
|
With Pressure Sensors, changes in pressure can be measured to confirm suction, verify mounting, manage source pressures, and test for leaking. Differential Pressure Flow Sensors are also available.
|
|
FEATURES
1. Contains built-in amplification and temperature compensation circuit.
Circuit design and adjustment of characteristics are not required by
users.
2. High-level precision and high reliability realized.
• Overall accuracy is ±1.25% FS (Standard type)
• Overall accuracy is ±4% FS (Economy type)
3. Compact pressure sensor unit that saves space.
Same size and footprint (7.0 mm (W) x 7.2 mm (D)) as previous PS pressure sensor.
Example of pressure characteristics (ADP5140)
Drive voltage: 5V DC rated voltage; ambient temperature: 25°C 77°F
|
|
|
SMD’s Peerless engineering team designs sensors for unique requirements and aggressive cost targets. Typical specialized requirements include small sizes, high temperature, low capacities, “Cenelec” dielectric, and overload proof sensors.
|
|
Pressure Switch
P01909
Features:
• Inline Mounting
• Dial Indicator for Easy Pressure Setting
• 5 Amp Rated Snap Action Micro Switch
• Heavy Duty Aluminum Components
• Compact Size
• Din 43650HCM Connector
• IP65 Rated
• Field Adjustable 30-150 PSIG
• +/- 2% Repeatability
• Single Pole / Double Throw Switch
Pressure Switch
P01908
Features:
• Inline Mounting
• 5 Amp Rated Snap Action Micro Switch
• Brass Body
• Compact Size
• Flying Leads Electrical Connection
• IP65 Rated
• Field Adjustable 25-100 PSIG
• +/- 2% Repeatability
• Single Pole / Double Throw Switch
|
|
Pressure sensors for general application, for gauge pressure, accuracy 0.25% and 0.5%
Pressure sensors for general application are top of the range pressure transducers.
Their accuracy, reliability, resistance to corrosion and mechanical load make them suitable for all pressure measuring tasks - in production, development or in the laboratory.
The measuring ranges, graded in accordance with EN, range from 25 mbar to the maximum pressure range of 4000 bar. The case and wetted parts comprise stainless steel and are thus resistant to chemically aggressive media. The pressure connection and measuring element are welded together, making the measuring system particularly resistant to mechanical shock or vibration.
For more difficult measuring tasks (e.g. hydrostatic column), two potentiometers enable the zero point and measuring range to be set.
The pressure sensors for general application meet the electronic magnetic compatibility (EMC) requirements to EN 61 326.
|
|
|
|
