|
|
Pressure Switches
Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They're proven under pressure, in applications constantly under attack from chemical splashes, performance spikes and other harsh environments. These switches sense a change in the pressure or vacuum, opening or closing an electrical circuit when the designated point is reached.
Honeywell offers an impressive line:
-Compact size
-Durable construction
-Enhanced set point integrity
-Customisation and modifications available
|
|
100 Series
Pressure, Differential Pressure & Temperature Switches
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: 30 "Hg Vac to 5000 psi; 1 bar Vac to 344 bar; 0.2 "wcd to 500 psid; 0,5 mbar d to 34,5 bar d ; -180 to 650 ºF; -117 to 340ºC
Approvals: UL, CSA, CE, TUV
|
|
Mechanical Pressure Switch
Relative and differential pressure switch Type 604
0.2 ... 50 mbar
The type 604 pressure switch is used as a ∆P flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers. The 604 pressure monitoring switches are also ideally suited to protect heating coils from overheating and for monitoring industrial air cooling circuits. Medium: air and non-corrosive gashttp://img.directindustry.com/images_di/photo-p/23640.jpg
http://img.directindustry.com/images_di/photo-p/23640.jpges.
Setting ranges:
- 0.2 – 3 mbar (20 – 300 Pa)
- 0.5 – 5 mbar (50 – 500 Pa)
- 1 – 10 mbar (100 – 1000 Pa)
- 5 – 20 mbar (500 – 2000 Pa)
- 10 – 50 mbar (1000 – 5000 Pa)
|
|
Digital display
100% adjustable set point and deadband
All solid state design
Remote and local "I AM Working®" status signal
Captures and displays MAX/MIN process extremes
Continuously stores HI/LO extremes
Adjustable ranges: 0 to 4500 psig (310, 3 bar) ; 0 to 200 psid (13, 8 bar) ; -300 to 1000ºF -184 to 538ºC
4-20 mA output models available
Division 1 (Intrinsically Safe) Division 2 models available
Approvals: UL, cUL, CE, ATEX, GOST
|
|
Relative and absolute pressure switch Type 615
Relative –1 ... 0 - 600 bar
Absolute 0 ... 0.3 - 16 bar
The type 615 pressure switches measure pressure by means of highly resistant ceramic elements. An open collector (transistor) output accommodates loads up to 100 mA. Either an N/C or N/O contact may be used, and the upper and lower switching point can be freely selected in the range 5 to100% fs. Various electrical and pressure connections are available to suit given applications.
|
|
-Precision stainless steel mechanism for arduous
atmospheres and high humidity.
- Set point adjustable over whole range against calibrated
scale with tamperproof adjuster.
- Precise and accurate operation guaranteed by use of
hydraulic formed bellows, or capsule stack.
- Ranges available up to 75 Bar (1,000 psi)
- NACE MR-01-75 compatibility.
- Models for fixed switching differential, adjustable
differential and HI-LO operation.
- Safety vented or blow out device as standard.
- Hermetically sealed microswitch option.
|
|
J6 Series
Product Overview
- Rugged, NEMA 4X, epoxy coated enclosure
- single switch output
- SPDT switch output
- Adjustable deadband versions available
- Adjustable ranges: 30 "Hg Vac to 6000 psi, 1 bar Vac to 414 bar
- Approvals: UL, CSA, CE
|
|
| ... products without technical information |
| |
Honeywell MICRO SWITCH™ Toggle Switch
Full-Scale Offering. Clean Slate Engineering. Optimal operator interface for controlling machine function to construction and agriculture equipment OEMs, in addition to aerospace, air transport, armored fighting vehicles. Our toggle switches withstand wet, dust, dirty environments and are designed for use in harsh environments. With many configurations available, our Honeywell can help you with quick customization.
-IP rating for commercial use
-Hermetic bonded sealing
-In-house machining and stamping capabilities
-Configurable components
|
|
|
|
|
|
ESPORT Full Size Rocker Switches
The ergonomically-designed ESPORT Series comes with a large independent LED-illuminated indicator window which clearly identifies the switch’s labeled function - your label or ours. The switch can be ordered with an LED illuminated actuator, as well. All ESPORT switches are molded in a clean matte finish and operate with a definite tactile feel. Actuation of the switch feels crisp. Also, ESPORT switches will accept loads up to 15A. Due to the LED's long life, lamp replacement should not be necessary.
Tested in America’s toughest truck applications, the ESPORT switch is reliable, durable and is available with a full range of rugged one-and two-pole circuits.
It has an optional polarized lock-on connector. Spade switch terminals are tin-plated for long storage life.
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 Hp @ 250V ac.
CUR marked.
Recommended up to
15A@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on ac and low voltage dc applications.
Contact Material:
Movable - Silver plated copper with silver contact face button.
Stationary - Copper with silver contact face button.
|
|
|
|
|
|
Field-proven in America's roughest off-road applications, the standard size EURO/SR is one tough and reliable rocker switch. Available with the complete range of rugged one and two-pole, illuminated or non-illuminated circuits. The EURO/SR Series offers snap-in mounting and can be provided with a durable silicone seal which resists dust and moisture.
All EURO/SR switches are molded in an aesthetically pleasing matte finish and operate with a crisp tactile feel allowing for easy actuation. The EURO/SR will accept loads up to 15A.
Terminal numbers are stamped on base for easy identification.
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 Hp @ 250V ac.
(Hp rating does not apply to lighted switches.)
CUR marked.
Recommended up to 15A
@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use
on ac and low voltage dc applications.
Mechanical Life:
Maintained - 100,000 operations, minimum.
Momentary - 25,000 operations, minimum.
|
|
|
|
|
|
Eaton presents its New Generation Rocker (NGR) Series. This fieldproven line of full sized rocker switches, initially developed for the Heavy Truck Industry is now found in a variety of vehicle related applications. The NGR offers both European styling and ergonomic design while still providing the solid durability that you have come to expect from Eaton switches.
Illuminated and non-illuminated versions with either incandescent bulbs or LED's are available in either dependent or independent circuits and in a variety of popular switching circuits. The NGR also offers a variety of rocker buttons and indicators with laser-etched or pad printed icons, insertable lenses and adhesive-backed labels.
Ratings:
15A @ 125V ac, 10A@250V ac.
15A @ 28V dc (14V dc rating).
Approvable under stringent UL and CSA standards.
For information, contact your Eaton Sales Representative.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on ac and low voltage dc applications.
|
|
|
|
|
|
Full Size Euro-Look Rocker Switches
Eaton's 8004 and 8005 Euro-Look Series features matte finish European styling and snap-in mounting. These durable switches, field-tested in the most demanding truck and marine applications, are available with a variety of standard actuator options. Options include concave, two-face, illuminated, non-illuminated, and the recessed feature which allows placement of your label on the face of our rocker.
All switches in this rugged lineup can be fitted with a silicone rubber seal to provide moisture and dust resistance.
Additionally, these switches can be gang-mounted into a single panel opening. Panel blanks are also available.
SPECIFICATIONS
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 HP @ 250V ac.
(Hp rating does not apply to lighted switches).
CUR marked.
Recommended up to
15A@28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break contact mechanism.
Butt action contact mechanism designed specifically for use on and low voltage applications.
|
|
|
|
|
|
Industrial Purpose Toggle Switches - AC/DC Rated
The Industrial Toggle Switch Line employs a Quick-make/Quick-break wiping action contact mechanism. Large, well separated terminals reduce the possibility of electrical creepage and insure separation of loose wire strands from adjacent leads. These switches are designed for heavy duty applications, such as industrial power tools and floor cleaning/polishing equipment.
Circuits: 1PST, 2PST, 2PDT. Maintained contact action.
Contact Mechanism: Quick-make/Quick-break wiping action.
Contact Material:
Movable - Copper silver plated.
Stationary - Bronze silver plated.
Terminal Types:
Screw Terminals - 7320 & 7321 Series: Brass designed to accept #5-40 x 1/4² (Cat. No. 811-14) binding head screws.
Furnished unassembled.
7360 & 7361 Series: Brass designed to accept #6-32 x 1/4² (Cat. No. 811-161) binding head screws.
Furnished unassembled.
8690 Series: Brass designed to accept #6-32 x 1/4² (Cat No. 811-7248) binding head screws.
Furnished unassembled.
|
|
Honeywell pushbuttons and manual switches are designed by industrial designers to achieve a balance between harmonious appearance and ergonomics, and to accommodate a wide range of electrical and display design. Available in many shapes, sizes, configurations and colors to enhance manual operation with a flexible and attractive interface. The standard size includes pushbuttons, paddles, rockers, solid state indicators and electronic key locks with LED, incandescent and neon illumination, plus matching indicators and LED annunciators. A smaller version offers many of the same features in a space-saving size. Snap-in surface mount products are easy to apply, operate and maintain.
Best Used For:
Applications requiring manual operation such control boards and panels in industrial and test equipment, computer mainframes and peripherals, process control and medical instrumentation
|
|
|
Yaskawa's Bestac oil-tight and waterproof 3 amp reed push-buttons offer industry-standard 30 mm diameter operators with a NEMA 4/13 enclosure rating. They are ideal for gaseous Class I, Division 2 hazardous locations where explosion-proof enclosures are not needed. These push-buttons are UL Listed and CSA Certified and have pilot duty inductive switch ratings of C300 (180VA) and Q150 (69VA). NEMA size 4 or larger contactors can be energized directly. Available operators are flush, half-shroud, full shroud, mushroom head, 2 position knob, and cylinder lock. Up to four contacts per operator can be used.
|
|
General Purpose Illuminated Pushbutton Switches
Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment and many other commercial applications. A variety of options are available such as illuminated and non-illuminated versions, colored lens caps, lamp styles, and mounting styles.
Each pushbutton series offers a matching indicator for a consistent look. See the reference table below to quickly identify the required product. Then, refer to the selection table to determine the catalog number.
095 Series
Options:
T-1 lamps.
Special dead front and sunlight readable lenses legends.
Split legend lenses.
Military Snap-Switch, MS 8805.
|
|
General Purpose Pushbutton Switches - AC Rated
These general purpose ac rated pushbutton switches offer a wide variety of configurations, button styles and termination types.
The 7835 and 7836 light duty series are ac only pushbutton switches. They feature Slow-make/Slow-break butt type contacts with a light operating pressure that is particularly suited to instrumentation applications.
Ratings:
See selection table.
Circuits: 1PST, 1PDT, 2PDT.
Momentary action.
Contact Material: 3-6A Rated
Movable - Silver plated copper.
Stationary - Silver plated copper.
10-15A Rated
Movable - Silver plated copper with fine or coin silver contact face button.
Stationary - Copper with fine or coin silver contact face button.
Terminal Types: Screw Terminals - Brass.
Furnished unassembled.
8448 Series
#6-32 x 3/16² binding head screws (Cat. No. 811-2).
8410/8411 Series
#5-40 x 3/16² (Cat. No. 811-7206).
8406/8440 Series
#5-40 x 5/32² screws (Cat. No. 11-26).
Solder Lug - Brass silver plated.
|
|
Chromium plated metal bezel pushbuttons, switches and pilot lights, Ø 22 mm.
Description
An offer unrivalled in content
Pushbuttons, spring return
Multiple-headed pushbuttons, spring return
Emergency Stop or Emergency switching off mushroom head pushbuttons, Ø 30, 40, 60 mm
Selector switches and key switches
Pilot lights (LED, incandescent and neon lights)
Combined functions : contact + signalling
Complete products or sub assemblies for user assembly
Connection: screw clamp terminals, plug-in connector, Faston connectors, spring clamp terminals.
Robustness and safety
Certified and approved for meeting the requirements throughout all the continents: EN/IEC, UL, CSA, CCC, Gost, JIS, NEMA…
CE marking
Up to IP 66, IP69K
Low-load electrical contact and high power
Shakeproof connection screws (periodic re-tightening unecessary)
Simplicity and speed of installation
Only one installer required
Fixing by a single locking screw (anti-rotation)
Common accessories
|
|
|
IMO's range of 22.5mm control pushbuttons and indicatorsare available with Plastic, Metal or Chrome bezels and are supplied in modular form to allow total flexibility. The Cam switch range offering sw.
|
|
|
|
|
|
Honeywell MICRO SWITCH™ Basic Switches
The switch is on. Our snap-action basic switch is simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH™ snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH™ Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions.
The Premium families of MICRO SWITCH™ Large and Subminiature switches were designed for high-precision applications where the cost of a switch failing is high. Originally developed to support United States aircraft in World War II, advancements in packaging and operating controls have helped further expand applications over the past 75 years while maintaining enhanced accuracy and repeatability.
Our Standard families of Basic and Miniature switches include our V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.
|
|
Honeywell MICRO SWITCH™ Toggle Switch
Full-Scale Offering. Clean Slate Engineering. Optimal operator interface for controlling machine function to construction and agriculture equipment OEMs, in addition to aerospace, air transport, armored fighting vehicles. Our toggle switches withstand wet, dust, dirty environments and are designed for use in harsh environments. With many configurations available, our Honeywell can help you with quick customization.
-IP rating for commercial use
-Hermetic bonded sealing
-In-house machining and stamping capabilities
-Configurable components
|
|
|
|
|
|
S Series Snap Action Switches
The S Series product group expands Eaton's snap action switch portfolio to cover all major amperages and operating forces.
A wide range of sizes and options gives customers the ability to select the most appropriate switch for their specific application.
Typical applications include computers, consumer electronics, small appliances, power tools, vending machines and packaging machinery.
Ultraminiature
The SC Series offers the smallest size with ratings of 0.1A and 3A.
A choice of operating forces, terminations and lever combinations is available.
Subminiature
Slightly larger than the SC Series, the SE/SEV Series offers more options in operating force, termination, and lever style. This series also offers a 1PDT circuit and a 1PST circuit with either NO or NC terminals. The SEV version
has VDE microgap approval.
Subminiature Waterproof
The SF Series is ideal for applications where the switch is subject to submergence of water or poor environmental conditions. It has one current rating and operating force but a variety of terminations and lever
combinations. A 1PDT circuit and a 1PST circuit with either NO or NC terminals is available.
General
The SG Series is the standard size snap switch with amperages from 0.1A to 15A, and a variety of operating forces.
With VDE approval, the SGV Series has a contact distance of larger than 3mm.
Low Torque
The SJ Series is the low torque series designed to meet applications where a light actuating force is needed.
A selection of operating forces and lever combinations is available.
|
|
|
|
|
|
Industrial Purpose Toggle Switches - AC/DC Rated
The Industrial Toggle Switch Line employs a Quick-make/Quick-break wiping action contact mechanism. Large, well separated terminals reduce the possibility of electrical creepage and insure separation of loose wire strands from adjacent leads. These switches are designed for heavy duty applications, such as industrial power tools and floor cleaning/polishing equipment.
Circuits: 1PST, 2PST, 2PDT. Maintained contact action.
Contact Mechanism: Quick-make/Quick-break wiping action.
Contact Material:
Movable - Copper silver plated.
Stationary - Bronze silver plated.
Terminal Types:
Screw Terminals - 7320 & 7321 Series: Brass designed to accept #5-40 x 1/4² (Cat. No. 811-14) binding head screws.
Furnished unassembled.
7360 & 7361 Series: Brass designed to accept #6-32 x 1/4² (Cat. No. 811-161) binding head screws.
Furnished unassembled.
8690 Series: Brass designed to accept #6-32 x 1/4² (Cat No. 811-7248) binding head screws.
Furnished unassembled.
|
|
Honeywell's military grade construction switches are environment and hermetically sealed switches and switch assemblies that meet military specifications, combining maximum sealing, high temperature capabilities, and rugged, heavy duty, corrosion-resistant construction. Standard and miniature versions are available.
Best Used For:
Harsh environments such as are found in aerospace, transportation, ordnance and marine applications.
|
|
|
|
see the results for the following category : 
