|
|
|
|
|
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa (resolution : 0.1 Pa)
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input).
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
ComfortSense
Thermal comfort measurement according to EN 13182, ISO 7736 and ASHRAE standard 113
Dantec Dynamics’ ComfortSense system is designed for research and development of heating and air conditioning systems requiring multi-point measurements of air velocity and temperature. Draught measurements require omnidirectional sensors with a frequency response of at least 2 Hz, which is fulfilled by the present system.
ComfortSense elements
The ComfortSense system consists of a main frame with anemometer circuits for up to 16 probes. The omnidirectional probes measure both air velocity and temperature. Six frames can be connected so that up to 96 probes can be monitored simultaneously. The ComfortSense main frame has a built-in A/D converter with USB 2.0 interface.
Easy-to-use
It is easy for the user to setup a measurement sequence and make a measurement grid with selection of probes from a user library. The software delivers statistical results based on user-defined measurement cycles. The ruggedly designed probes and cables are perfectly suited for large test rooms.
|
|
The Activa Sensor Array provides fl ow,
temperature and pressure signals in a compact
unit that requires only one hydraulic line break.
Each sensor transmits an output signal that is
easily integrated with PCs, PLCs, recorders or
panel displays. Signals can also be transmitted to
Flo-tech’s F6700/F6750 Series digital displays.
|
|
|
|
|
|
Special application needs are met by a broad selection of accurate Hastings gauge tubes. Thermopile, thermocouple, piezo-resistive strain gauges, and super Pirani sensor types are available to cover vacuum pressure ranges from 10-5 to 1000 Torr. Gauge tubes are temperature compensated, and the rugged hermetically sealed construction withstands system vibration and pressure shock. Use of noble metals assure stable, long-term calibration. Design variations include sensors for high temperature (bakeable), harsh outdoor environments, and high over pressure. Also a myriad of system connection configurations are available to meet a wide range of system mounting requirements. These include 1/8" NTP, Smooth (for welding), VCR, KF, 16, KF 25, glass, MiniConflat(TM )and large
Conflat(TM). Additional system connections can be made to order.
The DV-6S Tubes have been designed for rigorous vibration and shock applications. The gauge tube is compatible with other Hastings products, but specifically the handheld HPM-4/6. The tube is designed for the 0 - 1000 mTorr range, the standard DV-6 range.
MiniConflat and Conflat are trademarks of Varian Asssociates,Inc.
|
|
|
|
|
|
PRODUCT DESCRIPTION
The VacuMini is a commercial version of Televac's highly successful NASA 2A sensor. VacuMini uses the same principle of operation as all Televac type 2A thermocouple sensors. It is roughly 1/2 the size and volume of traditional vacuum thermocouple sensors. A machined 304 stainless body is designed with 1/8" NPT connection threads and integral wrench flats for ease of installation. Unlike traditional vacuum thermocouple sensors which have exposed electrical pins, VacuMini's pins are protected in two ways. They are recessed within the sensor body diameter and a tethered and gasketed military type screw-on weather cap isolates the pins from moisture and dirt. The VacuMini will operate in any physical orientation. We do suggest you consider using one of our filters in the event your vacuum vessel or process contains excessive particulates or contaminates.
PRODUCT APPLICATIONS
The VacuMini is ideally suited to applications where the vacuum vessel is located outdoors or in a physical environment that renders use of traditional thermocouple sensors impractical. Examples of such applications include:
- Fixed & mobile bulk cryogenic storage and transport vessels.
- Vacuum jacketed gas delivery manifolds.
- Mechanical vacuum pumps and blowers.
- House vacuum systems
|
|
General description :
MDC's Thermocouple Gauge Tubes (TGT) are designed to offer fast and reliable vacuum measurement and are extremely reliable vacuum measuring sensors. These devices are built with advanced precision fabrication techniques to deliver unsurpassed tube-to-tube repeatability. Rugged all-metal enclosures are compatible with a wide range of environments. TC gauge tubes are offered in a variety of end connections to accommodate easy installation.
Features :
- Corrosion-Resistant
- Non-Contaminating
- Stable Calibration
- Rugged Under Demanding Conditions
|
|
ATEK MELT PRESSURE TRANSMITTERS provide accurate and repeatable measurements, are designed for high temperatures in applications such as plastics extrusions, oil services, food and medical, injection, blow molding, and resin production
- Good Stability and Anti-Jamming capatibility
- Economical Price
- Zero and Span Adjustable
- Various Amplified Signals Optional
4 - 20 mA , 0 - 10V or 3.33mV/V
- Flexible Capillary Isolation Configuration
- Internal 80% Shunt Calibration
|
|
|
|
|
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa (resolution : 0.1 Pa)
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input).
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
ComfortSense
Thermal comfort measurement according to EN 13182, ISO 7736 and ASHRAE standard 113
Dantec Dynamics’ ComfortSense system is designed for research and development of heating and air conditioning systems requiring multi-point measurements of air velocity and temperature. Draught measurements require omnidirectional sensors with a frequency response of at least 2 Hz, which is fulfilled by the present system.
ComfortSense elements
The ComfortSense system consists of a main frame with anemometer circuits for up to 16 probes. The omnidirectional probes measure both air velocity and temperature. Six frames can be connected so that up to 96 probes can be monitored simultaneously. The ComfortSense main frame has a built-in A/D converter with USB 2.0 interface.
Easy-to-use
It is easy for the user to setup a measurement sequence and make a measurement grid with selection of probes from a user library. The software delivers statistical results based on user-defined measurement cycles. The ruggedly designed probes and cables are perfectly suited for large test rooms.
|
|
The Activa Sensor Array provides fl ow,
temperature and pressure signals in a compact
unit that requires only one hydraulic line break.
Each sensor transmits an output signal that is
easily integrated with PCs, PLCs, recorders or
panel displays. Signals can also be transmitted to
Flo-tech’s F6700/F6750 Series digital displays.
|
|
T500 Elite - HotBus system
- Serial Network for Continuous Remote Sensor Monitoring
- Preventative maintenance tool fully compatible with existing systems
- Accepts input signals from a total of 256 sensors
- User adjustable trip-points for alarm & shut-down
- “BUS VIEW” Easy-to-use graphical monitoring software available
- Utilises the "HotBus" communications system
|
|
Control your storage & incubation conditions
Guarantee your products quality
Ensure a complete traceability of the monitored parameters
LABGUARD 2 is THE solution...
Simple and wireless, it measures and records
in real time the different parameters : temperature, humidity, pressure, CO2...
and manages alarm in real time.
In one screen and a few clicks only...
|
|
|
Self-operated temperature regulators with wide set point ranges equipped with control or safety thermostats, typetested, also for mixing or diverting service. The temperature regulators are available with globe or three-way bodies with connection nuts as well as with flanged bodies. The control and safety thermostats have a wide set point range and can be used to form, for example, a regulator with temperature limiting or monitoring function.
|
|
TER-3A:NTC thermostat -30..+10 °C
* single thermostat for temperature monitoring and regulation in range -30.. +70 °C in six ranges
* can be used for monitoring temperature e.g. in switchboards, heating systems, cooling systems, liquids, radiators, motors, devices, open spaces, etc.
* function of short-circuit or sensor disconnection monitoring
* possibility to set function “heating”/”cooling” ( setting is done by DIP switch)
* adjustable hysteresis (sensitivity) , switching by potentiometer in range 0.5 -5 K
* choice of external thermo sensors with double insulation in standard lengths 3, 6 and 12 m (see accessories pg. 87)
* it is possible to place sensor directly on terminal block – for temperature monitoring in a switchboard or in its surroundings
* multivoltage supply AC/DC 24 -240 V, not galvanically separated
* output contact 1x NO 16 A /250 V AC1
* red LED indicated status of output, green LED indicates energization of the device
* 1-MODULE, DIN rail mounting
|
|
Available Temperature Range & Tolerances:
All models available over the range of 49ºC to 177ºC and are available in 1ºC increments (tolerances apply).
Contact Configuration and Current Ratings:
Model Contact Configuration Current Capacity
70M Normally Closed 120Vac/8Amp, 240Vac/6Amp
70MR Normally Open 120Vac/8Amp, 240Vac/6Amp
75M* Normally Closed 120Vac/10Amp, 240Vac/8Amp
120M Normally Closed 120Vac/14Amp, 240Vac/10Amp
325* Normally Closed Up to 50Amp LR
*Various current sensitivities available. Please inquire.
Tolerances:
Set 49ºC (120ºF) to 148ºC (299ºF): +/-5ºC (9ºF)
Set 149ºC (300ºF) to 177ºC (350ºF): +/-9ºC (16.2ºF)
|
|
| ... products without technical information |
| |
|
Significant scientific and engineering enhancements in advanced materials, Pre-Process and In-Process production methods and in-site testing methods are driving the demand for displacement sensors that can handle extremely high temperatures up to 1832°F (1000°C). Contemporary producers of aircraft engine rotational alignment, plate glass, materials testing extensometry, continuous flow steel, now use standardized high temperature Capacitec sensor solutions for in-process applications to control the quality of their production on a real time basis. Qualification testing of disc brakes, jet engine dynamics and high speed shaft rotations also rely on Capacitec sensors. Advanced materials for automobiles, structural components, and aircraft are also tested for strength and durability with the use of Capacitec's line of extensometers and clip gauges.
|
|
|
We offer modification to our standard range of displacement transducers for high temperature capability, as well as versions specially designed for both high temperature and high radiation environments including non-contact, proximity types.
|
|
| ... products without technical information |
| |
|
Capacitive sensors (KAS) react to metals and non-metals that exceed a specific capacitance on approaching the active surface. The sensing distance with respect to a specific material is greater the higher the dielectric constant. The sensors are used to detect objects, for counting functions and for all types of level monitoring applications in liquid materials (i.e. water, oil, acids, glue) and bulk materials (i.e. pouder, granulate, pellets).
|
|
|
|
|
|
They should be considered as part of the traditional range of
sensors with the difference that electronic portion is
completely separate from the sensing part which is
in the form of an extension which can withstand temperature
from -200 ÷ +250 °C.
These products are used to control the levels of hot
materials such as liquids, oil, powder and plastic granules.
They also sense solid metallic and non-metallic bodies positioned
in areas of high temperature. ALSC Amplifier in plastic housing
with UNDECAL PLUG
-Supply voltage: 24Vac or 110/220 Vac
-ALSC-1 CH type suitable for one sensor
-ALSC-2CH type suitable for two sensors
-Led incorporated
-Sensitivity adjustment
-Relay output changeover 5A to 220 Vac
Sensors for high temperature: stainless steel housing
M18 and M30, sensitive side PTFE
-Provided with connector for connection to the amplifier
-cable length: 2 or 5 metres
-min./max. working temperature from -200 ÷ +250 C
-sensing distance: 5 mm for type SC18M-HT and 15 mm for
type SC30M-HT
-degree of protection: IP68
|
|
|
|
|
|
HIGH TEMPERATURE SENSORS
Significant scientific and engineering enhancements in advanced materials, Pre-Process and In-Process production methods and in-site testing methods are driving the demand for displacement sensors that can handle extremely high temperatures up to 1832°F (1000°C). Contemporary producers of aircraft engine rotational alignment, plate glass, materials testing extensometry, continuous flow steel, now use standardized high temperature Capacitec sensor solutions for in-process applications to control the quality of their production on a real time basis. Qualification testing of disc brakes, jet engine dynamics and high speed shaft rotations also rely on Capacitec sensors. Advanced materials for automobiles, structural components, and aircraft are also tested for strength and durability with the use of Capacitec's line of extensometers and clip gauges.
High Temperature Major Applications:
- Disc brake testing
- Silicon Wafer processing
- Metal and Glass forming
- Jet engine thermal expansion
- Material strength testing
- Mold separation
- Turbine testing
- Strain Extensometry
|
|
|
|
|
|
Applications: Direct installation into engine oil gallery, transmission housing and fuel system for lubricant and fuel quality monitoring
Industries: Transportation, General Industry
Description: The FPS2800B12C4 is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic and gear oils, refrigerants and solvents. The multi-parametric analysis capability improves fluid characterization algorithms. The FPS provides in-line monitoring of fluids for a wide range of OEM and aftermarket installations including fluid reservoirs, process lines and pressurized high flow conduits (e.g., engine oil gallery) for applications that include on and off highway vehicles, HVAC&R, compressors, industrial equipment and turbines. A universal digital CAN J1939 compliant protocol provides easy to connect interface to main Host controller. A simple 4 pin connector allows for cost effective mounting options.
Features:
-Fully integrated, stand-alone module combines sensor and processing electronics
-Rugged construction for high pressure and high flow environments
-Proprietary corrosion and contaminant resistant coating for wetted parts
-Accurate, repeatable temperature, viscosity, density and dielectric constant
-Factory calibrated with NIST traceable fluids
-On-board microprocessor for real-time data analysis with 5, 12 or 24 Volts supply
-Highly reliable and long term stability
-Digital output as per J1939, CAN2.0B standard or CAN 2.0A featuring high-resolution parameter readings
|
|
Description: The fluid property analyzer (FPA) is designed to provide customers with an industrial robust and flexible platform for monitoring applications that may include distillation and chemical process streams, machinery lubricants, and gear oils. The FPA offers data logging capabilities, as well as direct digital or analog integration to distributed control systems (DCS) for remote system monitoring.
Features:
-Flexible design enables a wide variety of industrial and process monitoring installations
-Stainless steel, hermetically sealed analyzer with electronic control module
-Operating Temperature: -40°C to 125°C
-Operating Range: Fluid viscosities 0 - 100 mPa-s
-Factory calibrated with datalogging and field calibration options
|
|
DS-22 / DS-T 22
DS-22 and DS-T 22 sensors for water level and temperature measurements. High accuracy (< 0,1%). outputs: 0-1V, 0/4-20 mA oder RS 485.
|
|
|
|
see the results for the following category : 
