|
|
Thin film coating is a vacuum deposition procedure used to enhance the transmissive properties of an optical surface. The most common types of dielectric coatings are anti-reflection and high reflection coatings, but beam-splitter, band pass filter, edge filter, and polarizing coatings are also available. Because thin film coatings are more durable than optical glass, coatings also help protect an optic surface from scratches and the environment.
Optimax produces optics up to 300mm in diameter with a wide variety of narrow and broadband anti-reflection coatings including doublet interface coatings. Both metal and dielectric mirror coatings are also available. For custom coatings, we utilize TFCalc thin film design software. Please see the reverse side for sample reflectance curves.
Optimax performs test runs of all coatings before beginning production to ensure a good design. We use a Perkin-Elmer Lambda 900 Spectrophotometer to check the performance of the coating upon completion. Adhesion, abrasion, and humidity tests are available to verify coating durability in accordance with sections of MIL-C-675C, MIL-C-48497A, and MIL-C-13508C specifications. Laser damage testing is also available upon customer request. |
|
| ... products without technical information |
| |
| Paint & Varnish Remover is a fast and economical stripping agent for wood or metal surfaces. Its balanced blend of powerful solvents in a thick gel offers a heavy-bodied spray, which removes most finishes such as paint, enamel, varnish, shellac, epoxy, lacquer, acrylic, etc. It is easier and faster to use than conventional brush-on products and is non-corrosive, non-caustic, nonflammable, and washes away with water. 20 oz Can / 20 oz Net Wt. |
|
| ... products without technical information |
| |
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
| ... products without technical information |
| |
| Unique design allows quick unclogging of spray tips without removing them from the spray gun. Plus, tungsten carbide orifice inserts ensure maximum erosion resistance. |
|
| These tubes are especially designed for the applications of painting, varnished and coating per pulverization. |
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts |
|
Were developed for high precision
flow metering for a wide variety of
liquids, especially liquids with high
abrasiveness and poor lubricity.
Applications include: chemical,
petrochemical, pharmaceutical and cosmetic
industry, two-component mixers,
paints, aviation.
Are dead spaced optimized for
(easy flushing) use in the paint industry
and for paint spraying systems. |
|
With the S-20 Tungsten Carbide Tool, Taber's Shear/Scratch Tester can evaluate coating adhesion on a variety of materials. A precision cutting tool is attached to a balanced and calibrated scale beam, then placed on the specimen. As the turntable rotates the specimen, the cutting tool will shear the coating, allowing you to verify proper adhesion. By changing the load on the cutting tool, you can determine the point of failure.
|
|
Lacquer and Paint Testing Machine, Model 202 C
Version with electro-hydraulic drive for coated sheets up to 1.5 mm thick. Infinitely variable control of drawing speed up to 50 mm/min. Automatic clamping of specimen. By virtue of the C-form test head aperture it is possible to test sheet metal panels in addition to sheet metal strips.
Option:
Camera module VIDEOMASTER USB comfortable observation of the deep drawing process or stereo microscope. |
|
Cupping and Deep-drawing Cup Test Machine, Model 242
For testing lacquers and paints of all kinds for elasticity and adhesive quality using the Erichsen Cupping Test in conformity with DIN ISO 1520, ISO 1520, BS 3900:Part E4, NF T 30-019 and SIS 18 41 77 and deep drawing cup test. Matched test tools permit automatic sequence of operations: pressing the test piece, cutting the blank, exerting the sheet holder pressure, deep drawing, sheet holder pressure release, stripping of cup, return of punch to initial position and switch-off of machine.
The testing machine including one test tool according to DIN ISO 1520. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts. |
|
Advantages include:
Tube-based system eliminates costly resourcing and loss of speed
Single-element analysis - ideal for Lead (Pb) checks
Definitive Pos./Neg. Classifications
No isotope licensing or travel restrictions
Ergonomic, lightweight design
Versatile PDA platform.
Easily measures uneven surfaces |
|
iControl® Integrated Control System
Stop The Waste And Take Control with iControl.
Now you can stop the waste and take control of your powder coating operation with Nordsons iControl integrated control system, featuring closed loop digital flow control, automatic gun triggering and reciprocator control.
Traditional open loop controls lack repeatability and don't compensate for incoming air pressure changes at the powder pump. With closed loop flow control, like iControl, changes in compressed air input are measured and converted in to digital signals, then sent to a proportional valve.
This valve then compensates for varying pressure by changing the airflow to the pump accordingly - resulting in repeatable powder output from the gun and uniform film build on the part beng sprayed.
The technology provides digital control of all application parameters and gun movers through a single, user-friendly operator interface.
|
|
| ... products without technical information |
| |
APPLICATION Suitable for producing adhesive tape, such as:
BOPP tape/Double-side tape/Kraft paper tape/Label sticker/Foam tape/ Cloth tape/Polyester and Release paper.
FEATURES Special designs, suitable for various kinds of materials.
Auto tension control.
Auto temperature controlling to suit refresh materials.
Special designs for heating system, high efficiency.
According to different types to design different coating method.
MAIN TECHNICAL PARAMETERS:
MODEL AT-500 AT-1000 AT-1300 AT-1600
Valid width 500 mm 1000 mm 1300 mm 1600 mm
Mechanical Speed 5-30M/min 5-80M/min 15-150M/min 15-150M/min
Coating average degree ± 0.025mm
Rewinding Edge Smooth ± 3mm
Mechanical Power 5-25 HP 20-45 HP 30-80 HP 40-100 HP
Oven Length Special design is available according to customer’s request
Heating Steam/Hot Blast/Thermal Oil/Electricity |
|
| ... products without technical information |
| |
State of the art technology, working pressure achieved within 4 minutes, consistent uniform coatings – even on curved substrates, optimized deposition processes for different substrates, high deposition rates.
Based on many years of thin-film experience this sputtering system the SP-100 reflects the state of the art in precision pulse plasma sputtering technology. The single-target, reactive sputtering principle provides outstanding flexibility for process innovation and simplified operation. |
|
High volume vacuum Box Coater.
The 1200-DLF Box Coater deposits anti-reflective (AR) and / or mirror coatings on organic and mineral glass lenses via thermal evaporation process. It offers multiple process applications. This machine is built for highest throughput requirements in Rx-Lab and stock lens production. |
|
| ... products without technical information |
| |
|
