- Hydraulics - Pneumatics >
- Filter and Separator >
- Process separator
Process separators
Flow: 120 l/min
Filtration size: 3 µm
... the high-performance 4 kW drive, and thanks to the special inlet hub the separator U-15 achieves a very good separation level of down to 3 µm. The cleaned medium leaves the separator under pressure (5 ...
Flow: 150, 250 l/min
... through spirally arranged spatula scrapers – air guides for final drying of sludge Fully automatically draining centrifugal separator for relatively high sludge quantities. Application: Fine cleaning of industrial ...
Flow: 1,000 m³/h
Length: 95 cm
Width: 83 cm
The all-round separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: ...
Flow: 2,000 m³/h
Length: 95 cm
Width: 105 cm
Large separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: 350 mBar Total ...
Flow: 3,000 m³/h
Length: 95 cm
Width: 105 cm
XL separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: 350 mBar Total ...
Flow: 800 m³/h - 45,000 m³/h
Filtration size: 2 µm - 250 µm
ACX classifiers belong to the main group of products offered by Comex. They have been available on the market since 1993. The number of ACX application has been carried out mostly in mineral industry. Many applications ...
Flow: 800 m³/h - 62,000 m³/h
Filtration size: 2 µm - 300 µm
UCX classifiers represent a group of products for ultra fine applications. This classifier series was newly developed for demanding applications where fine particles are to be produced with still high ...
Flow: 5 l/h - 14,000 l/h
In traditional separator designs, the motor and centrifuge shaft are discrete units that must be connected to transfer energy from the motor to the shaft. Traditionally, this connection is indirect, in that an intervening ...
Flow: 750 l/h - 7,500 l/h
... Seital Separation offers a wide range of solids-retaining separators for liquid/liquid/solid separation with very low solids content in the feed (less than 0.2% in volume). This type of separator allows ...
Disc stack centrifuges for degumming and pre-treatment of feedstock for HVO, SAF, Renewable Diesel production
SERVIZI INDUSTRIALI SRL
Flow: 0 m³/h - 50 m³/h
Filtration size: 1 µm - 500 µm
• Macfuge separator liquid / liquid / solid separator or liquid /solid clarifier • self-cleaning machine • centripetal pumps for the extraction ofthe separated phases integrated in thecentrifuge construction • ...
SERVIZI INDUSTRIALI SRL
Flow: 40 m³/h
Filtration size: 1 µm - 500 µm
Macfuge separator liquid / liquid / solid or liquid / solid clarifier Self cleaning machine Centripetal pumps for the extraction of the separated phases integrated in the centrifuge Gear drive Control of the motor by ...
SERVIZI INDUSTRIALI SRL
... continuous production, automatic removal of ferromagnetic particles without stopping the production process. Magnetic drums/separators can be used with free-falling product flows, after vibrating trough ...
... interrupting the manufacturing process. MST type overconveryor permanent magnetic separator has permanent magnets in its core and therefore does not need a power supply for its operation. Power is needed ...
... for assembly processes, the separation of bulk material is necessary and ensures a streamlined and economical production process. We will design and manufacture the optimal separation solution for you, completely ...
Width: 800 mm - 3,400 mm
Electromagnetic drum separators are available in both disc and transverse pole versions. In the STEINERT MTE Q transverse pole version there are several magnetic poles aligned parallel to the axis. The first pole generates ...
Cut new coolant purchases up to 75% with the PRAB tramp oil separator system. Extend the life of soluble oils, coolants and washwater. The PRAB tramp oil separator system removes free-floating and ...
Increase Coolant Life, Reduce Coolant Purchases. The PRAB Drum-Type Scraper Separator provides high-quality separation that is applicable to aluminum, non-ferrous, and composite materials. The unit does not consume ...
Flow: 150 l/h - 250 l/h
... the tank for reuse. This process facilitates the removal of bacteria and the total elimination of fumes and odours caused by the presence of fungi floating in the machine tool tanks. The combined use of a CLEAN OIL ...
Flow: 100 l/h - 400 l/h
... the tank for reuse. This process facilitates the removal of bacteria and the total elimination of fumes and odours caused by the presence of fungi floating in the machine tool tanks. The combined use of a CLEAN OIL ...
Flow: 300 l/h - 800 l/h
... the tank for reuse. This process facilitates the removal of bacteria and the total elimination of fumes and odours caused by the presence of fungi floating in the machine tool tanks. The combined use of a CLEAN OIL ...
Suspended belt separator for the separation of ferromagnetic material, without interruption of the conveying process. These magnets are used in the areas of recycling of waste and recovery of metals. A ...
Washing and Fines Removal. 1/3 the water, 1/3 the power: The Ortner® is revolutionary in aggregate washing equipment for dewatering, removing fines, classifying and rinsing sand and other materials up to 3”. Material is fed into a ...
It receives the material from a conveyor belt and through its magnetic field separates the ferrous material from the rest of the materials.
... over the whole width of the separator and prevents at the same time that additional air enters the separator by using rubber curtains. The product mixture is led into the separation ...
Flow: 1.8 l/min - 6 l/min
Width: 440 mm - 570 mm
... pre-filtration stage will remove solid contaminants as well as it makes water particles aggregate together. The WS Water Separation filter inserted in the WS housing then performs the water droplets to merge into bigger ...
Flow: 9 l/min - 100 l/min
... bubbles from liquids. It’s based on the cyclone principle, and very efficiently eliminates all the fine air bubbles trapped and mixed inside the fluid. Quicktoron also helps to retain the filtration performance of filter ...
Consist of liquid-liquid and liquid-gas phase separators: The fluid passes over a bed with graduated porosity to coalesce the particles from their initial microscopic size until they form droplets that detach due to gravity. If ...
Demister consists of a collection of meshes of woven threads that forms a dense body designed to separate liquids in the form of small particles contained in steams and gases. They prevent emission of waste contaminants such as sulphur ...
Length: 338, 404, 478 mm
Width: 114, 140, 168 mm
Filtration size: 1.6, 0.51 µm
... heat transfer efficiency, and the validity of the sterilization process can be compromised. S10H series baffle separators remove moisture from steam pipelines. Steam passes through the separator ...
... longer take-off length and higher performance parameters. The SERVOFEED PF410/ PF420 ensures a smooth production process by • process-safe product transfer • continuous product discharge • constant ...
... as scales, metal detectors, labelers and others. The SERVOFEED PF410/ PF420 ensures a frictionless production process by • process-safe product takeover • continuous product discharge • constant ...
Length: 1,900 mm
Width: 2,300 mm
Weight: 2.6 t
... separation operation, the recovery rate is more than 20% higher than before. And SLon magnetic separators also perform better among similar magnetic separators.
Slon Magnetic Separator Ltd.
Length: 2,680 mm
Width: 3,000 mm
Weight: 7 t
... tailings. First of all, in view of the problem that the use of a large number of agents in the front end of the flotation process will lead to the blockage of the medium box, we optimized the design of the separation ...
Slon Magnetic Separator Ltd.
Length: 2,910 mm
Width: 3,200 mm
Weight: 9 t
... tailings. First of all, in view of the problem that the use of a large number of agents in the front end of the flotation process will lead to the blockage of the medium box, we optimized the design of the separation ...
Slon Magnetic Separator Ltd.
Length: 390 mm
Width: 500, 600, 700 mm
Small but separates like a pro! The multi-separator from SCHUMA is used for sorting sprues directly at the injection moulding machine or after a conveyor system. Sorting is done according to the di erence in height ...
... this and facilitate a trouble-free process, we recommend using our magnetic separator. The compact and modular design of the drum magnetic separator makes it possible for it to be ...
The magnetic grids are used for deferizzation of fines and granulated products and guarantee optimal results with maximum facility of installation. Usually they are assembled in a conical charging hopper with circular or square base, ...
Flow: 2 m³/min
... disconnecting the inlet and outlet, removing the separator and placing the new unit in the holding bracket. There are no separate elements and as such servicing is a quick and above all clean process. FEATURES Test ...
Jorc Industrial
Low Intensity Magnetic Separators, LIMS, are designed to recover magnetic material from non-magnetic matter. The separators have modular design with several frames and process tank designs ...
Metso Corporation
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining