|
|
! Efficient inspection of medium & heavy quality fabric.
! Efficient inspection through top & bottom illumination.
! Tensionless movement of fabric on inspection table.
! Full forward & reverse run of fabric.
! Speed variable from 0 – 50 mtrs/ min.
! Compact & crease free rolling on winding tubes.
! Max. Roll dia. Up to 400 mm.
! Length measurement by reputed counter meter.
! Straight & uniform roll winding through efficient selvedge guider.
! Operator friendly, improves productivity, reduces labour.
|
|
|
|
|
|
We have perfected the design & manufacturing of wide range of Fabric Inspection Machines available in various working widths which are easy to operate, technically advanced and programmable machines in the field of fabric quality control. Being developed by highly qualified engineers having vast experience of this field, our machines are equipped with all necessary features like tensionless handling, accurate length measuring, appropriate illumination, Straight roll selvedge, variable roll hardness, auto cutting etc.
! Efficient inspection of medium & heavy quality fabric.
! Efficient inspection through top & bottom illumination.
! Tensionless movement of fabric on inspection table.
! Full forward & reverse run of fabric.
! Speed variable from 0 – 50 mtrs/ min.
! Compact & crease free rolling on winding tubes.
! Max. Roll dia. Up to 1000 mm.
! Machine with any input & output of Roll/ Pile/ Big Batch can be manufactured.
! Length measurement by reputed counter meter.
! Straight & uniform roll winding through efficient selvedge guider.
! Operator friendly, improves productivity, reduces labour.
|
|
MASTER MEND:-
! Unique design for comfortable & efficient mending operation.
! Top & bottom illumination for efficient mending.
! Hands free foot operated with fixed speed drive.
! Machine with any input & output of Roll/ Pile can be manufactured.
! High production efficiency with minimal operator fatigue.
! Available in various working widths.
|
|
Allows mending, examination or inspection. All types of material successfully processed. Choice of input-roll, pile, 'A' frame, bale. Sloping or flat table with or without illumination.
Precision measurement by 'Birch' AutoMeasure. Guided roll up or plait. Optional cross cut. Doff out, with or without taping. Fault recording. Made to your specification.
|
|
|
|
|
|
Features:
- Inspection table is laminated with adequate number of tubes provided underneath and overhead the glass with variable lighting arrangement.
- Push button controls are given on the drive box on the right hand side.
- Cloth can run in FORWARD as well as in REVERSE direction instantaneously.
- Fabric runs face in/face out
- Special jogging or inching device is provided to stop the machine at the right location of the defect.
- Soft start and instantaneous stoppage of fabric.
- Automatic stop arrangement to stop the machine at the end of the fabric piece.
- Robust and attractive design.
- Bow bar has been provided in the batching device to open out the creases in the fabric.
- Perfectly aligned straight edges in tunes of +/- 1 to 2mm in our model with automatic edge guiding system. The device comes with an electronically operated motorized screw type arrangement, thus doing away with requirements such as compressed air etc.
- Perfect tension during the flow of the fabric is provided using guide roll assembly, thus no hassles of nip rolls.
- Meter Counter is installed in front on platform top for easy reading.
- Specially designed Thyristor based DC drive with MCB's for auto tripping of the machine.
- World renown AC drives with companies such as DELTA, ALLEN BRADLY, SEIMENS, TELEMECHANIQUE, etc. can be provided on our machines
|
|
|
|
|
|
INSPECTION MACHINE
FOR FABRICS WITH PLATFORM
Mod. ISP 220
The inspection, winding and plaiting machine with platform Mod. ISP 180 PLAIT / ROLLS,
Allows a check of the fabric quality.
Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay fabric, the machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC interfaced to inverter, the operator can modify in real time tension fabric and hardness roll.
With the addition of a platform to allow the operator a qualitative control more near at the fabric. The winding or PLAITING process happens behind the operator.
The machine can be inserted in an automatic layout of more inspection machine with an automatic packing
Technical characteristics:
• Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
• Inclined inspection table with rear light
• Up light
• Platform
• Auto-centring winding unit
• Winding of the roll
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system
|
|
|
|
|
|
Features
- Inspection table is laminated with adequate number of tubes provided underneath and overhead the glass with variable lighting arrangement.
- Push button controls are given on the drive box on the right hand side.
- Cloth can run in FORWARD as well as in REVERSE direction instantaneously.
- Fabric runs face in/face out
- Special jogging or inching device is provided to stop the machine at the right location of the defect.
- Extremely sensitive soft start and instantaneous stoppage of fabric.
- Automatic stop arrangement to stop the machine at the end of the fabric piece.
- Robust and attractive design.
- Bow bar has been provided in the batching device to open out the creases in the fabric.
- Perfectly aligned straight edges in tunes of +/- 1 to 2mm in our model with automatic edge guiding system. The device comes with an electronically operated motorized screw type arrangement, thus doing away with requirements such as compressed air etc.
- Meter Counter is installed in front on platform top for easy reading.
- Specially designed Thyristor based DC drive with MCB's for auto tripping of the machine.
- World renown AC drives with companies such as DELTA, ALLEN BRADLY, SEIMENS, TELEMECHANIQUE, etc. can be provided on our machines.
|
|
|
|
|
|
- MS Side frames pointed with hardwearing stipple finish stowing enamel . This makes the finish permanent..
- A cradle with tow M.S. side brackets and 6 rollers running on ball bearing to place the fabric roll. This arrangement allows tensionless unwinding of the fabric.
- Inspection table is laminated black/white, which enhances the defect identification procedure by making defects more easily visible to the operator.
- The angle of the table is changeable in order to allow the operator to select the right viewing angle. Also, mending of the fabric is easily possible due to this arrangement.
- Two overhead and two underneath tube lights are provided to optimize the lighting.
- Positive driven batch winding mounted on M.S. fabricated frames having two rubber strip coated rollers and batching roll guides. The fabric is wound on the batch roll by surface contact.
- A scroll rolls right after the inspection table opens the fabric roll.
- A bow bar is also provided to open the fabric right before the winding, which gives perfectly wound tight rolls.
- This winding arrangements winds rolls by 25% tighter than the traditional winding mechanisms.
- Measuring Counter is provided in front on the inspection table for easy viewing
- FORWARD/REVERSE/STOP push button controls mounted on inspection table on both sides.
- A special jogging (Inching) device is also provided.
- Soft start and instantaneous stoppage of fabric.
- MCB's to automatically stop the machine at the time overloading.
|
|
|
|
|
|
INSPECTION MACHINE
FRONT-REAR FOR TUBOLAR FABRICS
Mod. ISD 220
The inspection, winding machine, ISN NO STOP,
allows a check the quality of the front and the rear side of the fabric.
Thanks to the linear geometry and to a new system of drew-in of the fabric, the machine is able to check both the fabrics tubular that the fabrics in open, the new system of wrapping allows besides to wind the roll in hourly sense or ant-clockwise.
The machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC managed to inverter, and to the sensitive system of synchronization and the motorization of all the cylinders of transport fabric, the operator can modify in time real tension plotted and compactness roll.
Technical characteristics:
• Inlet fabric from Roll of plait
• Special draw-in of the fabric
• Double inclined inspection table with rear light
• Up light
• Auto-centring winding unit
• Winding of the roll in clockwise sense or ant-clockwise sense
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system
|
|
|
|
|
|
- MS Side frames pointed with hardwearing stipple finish stowing enamel . This makes the finish permanent..
- -A cradle with tow M.S. side brackets and 6 rollers running on ball bearing to place the fabric roll. This arrangement allows tensionless unwinding of the fabric.
- Inspection table is laminated black/white, which enhances the defect identification procedure by making defects more easily visible to the operator.
- The angle of the table is changeable in order to allow the operator to select the right viewing angle. Also, mending of the fabric is easily possible due to this arrangement.
- Two overhead and two underneath tube lights are provided to optimize the lighting.
- Positive driven batch winding mounted on M.S. fabricated frames having two rubber strip coated rollers and batching roll guides. The fabric is wound on the batch roll by surface contact.
- A scroll rolls right after the inspection table opens the fabric roll.
- A bow bar is also provided to open the fabric right before the winding, which gives perfectly wound tight rolls.
- This winding arrangements winds rolls by 25% tighter than the traditional winding mechanisms.
- Measuring Counter is provided in front on the inspection table for easy viewing
- FORWARD/REVERSE/STOP push button controls mounted on inspection table on both sides.
- A special jogging (Inching) device is also provided.
- Soft start and instantaneous stoppage of fabric.
- MCB's to automatically stop the machine at the time overloading.
|
|
|
|
|
|
INSPECTION MACHINE
FOR FABRICS DIRECTLY FROM THE RAMEUSE
Mod. ISN 220 NO STOP
The inspection, winding machine,
ISN NO STOP, allows a check of the fabric quality;this machine can be interfaced with the exit of Rameuse, or other machine kind calendar, without stop it. Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay fabric, the machine is excellently for the verification of elastic fabrics to sweater and shuttle.
Besides, thanks to the management from PLC interfaced to inverter, the operator can modify in real time tension fabric and hardness roll.
Technical characteristics:
• Inlet fabric from J-BOX with synchronization
• Inclined inspection table with rear light
• Up light
• Auto-centring winding unit
• Winding of the roll
• Adjustable compactness of the rolls
• Adjustable fabric tension
• ø500 mm diameter knitted fabric rolls
• 3÷60 m/min. speed control without step.
Optional:
• Digital weight measuring system
• Automatic linear cut
• Wood or special light
• Comatex software for store all the faults
• Barcode labelling for more type of error
• Mark-fault one or more fault
• Doubling system in 2 or 4
• Packing system
|
|
|
|
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT
Mod. ISR 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
|
|
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT WITH PLATFORM
Mod. ISRP 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Platform
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
Rewinding, inspection and cutting machine for rolls of all kinds of fabrics (decorating textiles, fabrics for clothing industry, knitted fabrics).
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Tilted 45° Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
|
|
Low-cost rewinding and cutting machine for rolls of fabrics.
Used by wholesalers.
# Fabric width up to 1800mm
# Maximum roll diameter 300mm
# One person operation
# Optiona accurate length measurement system with digital readout
# Varispeed rewinding system
# Machine dimensions 2100x 1000x 950
# Power supply 230V, 50/60Hz, 0.3kW
|
|
Used by wholesalers for rewinding decorating textiles, upholstery, clothing and other technical fabrics.
* Maximum roll diameter 40 cm (other dimensions on request)
* Flexible and modular concept.
* One person operation
* Inspection table with back lighting
* Accurate length measurement system
* Winding up station with adjustable speed control
* Power supply 230V, 50/60Hz, 1 kW
*Several options are available as loop control device and special equipment for tensionless inspection.
|
|
Checking - rolling - measuring machines with automatic or half automatic packing.
Main operations:
-Checking, rolling, measuring any type of cloth.
-Cloth inlet from small/big rolls and from folds.
-Cloth outlet on small/big rolls and on soft folds.
-Infinitely variable speed from 0 to 160 m/min. according to the type and the cloth to be rolled.
-Selvedge alignment of proportional photo-electric type.
-Innovative synchronisation systems of the driven cylinders allow rolling operation with constant tension of any type of cloth, needed compactness besides precise measuring.
-These machines are manufactured till max. working width of 4500 mm.
-You can add, on request, informatic control systems, fault detection, labelling, sewing unit, cutting machines, automatic elimination of second choice cloth without manual intervention of the operator, packing, etc.
|
|
Checking - rolling - measuring machines with automatic or half automatic packing.
Main operations:
-Checking, rolling, measuring any type of cloth.
-Cloth inlet from small/big rolls and from folds.
-Cloth outlet on small/big rolls and on soft folds.
-Infinitely variable speed from 0 to 160 m/min. according to the type and the cloth to be rolled.
-Selvedge alignment of proportional photo-electric type.
-Innovative synchronisation systems of the driven cylinders allow rolling operation with constant tension of any type of cloth, needed compactness besides precise measuring.
-These machines are manufactured till max. working width of 4500 mm.
-You can add, on request, informatic control systems, fault detection, labelling, sewing unit, cutting machines, automatic elimination of second choice cloth without manual intervention of the operator, packing, etc.
|
|
Green sand control in foundry has always been one of the main goals to be achieved in order to obtain good quality productions and to minimize scraps. So far, sand control methods were mainly based on the control of return sand moisture and on the consequent water addition to muller to obtain the desired moisture of prepared sand. There are also control systems which determine the compactability of mulled sand and then determine the quantity of water to be added.
All these systems give a partial answer to the demand of quality sand, in particular of constant quality sand. In fact, they do not allow the automatic control of important parameters such as strength, active bentonite, total bentonite, permeability and automatic addition of additives and new sand.
|
|
|
Modern foundries worldwide demand continuous improvements in casting quality and process productivity as well as continuous reductions in process variability and costs. To achieve these goals, we've installed nearly 800 Simpson+Hartley brand mixer group control and automation systems all over the world, in all types and sizes of foundries and on nearly all types of mixers.
|
|
|
|
|
|
Hydraulic pressure testing system that monitors and diagnoses fluid systems in a snap. Snap-Check enables machinery manufacturers to test system pressure quickly, easily, and leak-free. In the case of larger equipment, Snap-Check enables system pressure to be checked both after it is assembled at the factory and following reassembly at customer locations. The low-profile system identifies operating pressure and surges, without the need for a permanently installed gauge or transducer.
Requiring only one hand for connection and disconnection, CEJN Series 358 couplings and nipples make up the most user-friendly pressure testing system available. The Snap-Check system offers:
- Working pressures up to 60 MPa
- Smooth operation in temperatures from -40° F to +212° F
- Standard red plastic dust caps or optional metal screw-on caps that keep the system clean and free from grit and dirt when not in use
- Variety of thread configurations, including NPT, BSP, BSPT, metric, and SAE
- Long-lasting, reliable, test-port fittings and couplings for numerous applications, such as mobile hydraulic off-road equipment
Snap-Check liquid-filled pressures gauges are available in a wide variety of sizes and pressure ranges.
|
|
|
|
|
|
The first combined X-ray inspection system that fulfils all Weights and Measures regulations
The X-ray CombiWeigher represents a breakthrough in modern product inspection offering exceptionally high quality standards to meet the needs of the food processing and pharmaceutical industries. It is a complete product inspection combination system which not only performs highly accurate over and underweight checkweighing but also simultaneously inspects your products for foreign bodies – such as glass, metal, stone and high density plastic – using the very latest state-of-the-art X-ray and checkweighing systems.
The innovative and highly versatile XS3 AdvanCheK X-ray CombiWeigher is built to the highest safety standards in the industry and is compliant with IRR 1999. The HACCP compliant stainless steel (V2A) design, with sealing up to IP65, meets strict hygiene standards and requirements, making this system suitable for use in harsh working environments with a regular hygiene cycle.
A time and money saving combination
The effective combination of the two technologies in one system ensures that you will save both time and money in your production processes: the single multilingual 15” colour touchscreen user interface, with multi-level passwords and user profiles, is the central point for set-up and article management for both technologies, helping reduce possible operator errors and ensure faster production changeover thus minimising downtime. In addition, by using one compact system instead of two separate units, the time and costs associated with line integration, operator training and documentation are also vastly reduced.
|
|
|
|
|
|
Assembly lines
The Dynamic Assembly System (DAS) is a modular factory platform for light assembly, inspection, test, repairing and packing applications. DAS combines flow oriented dynamic production control and modular automation for increased production efficiency. This modular automation platform includes a range of standardized modules as workstations, conveyors and flexible buffers. Robot cells can be integrated into the line.
The goods are transported on product carriers with a RFID tag. It includes our flow management software "Youtilize" to execute orders, route the product carriers, gather quality data, handle stock and provide electronic work instructions to operators. Both the plug-and-play modules and the product carriers have their own embedded intelligence.
Modularity standardized communication allows step-by-step automation.
It is easier to add features to the assembly line when needed. Features are easily tested offline and testing is not interrupting production. The integrated modular system from FlexLink is effective, requires minimum
maintenance and is easily adjustable to changing needs in the production process.
|
|
-assembly systems, lines and devices,
-armature and stator winding machines,
-testing systems and equipment
|
|
Assembly & Test lines
Assembly and test of a product: a clear target, that often involves considerable technical engagement. MARSILLI proposes its expertise to study together with the customer the process required to reach this target, and to implement it concretely.
For lines with tens of automatic operations for assembly and test, or for a simpler machine (not necessarily less difficult) the MARSILLI approach is always the same: to apply technologies that are part of its know-how, or to develop new ones, to comply with the customer’s requirements.
|
|
Lean Cells
Consistent with its consulting services and manufacturing philosophy in Lean Production, Wes-Tech offers lean cells for Assembly and Testing. In general, Lean Production is a manufacturing system comprising assembly cells, pull system methodology, 100 percent acceptable quality, consistent on-time delivery, respect for people, and maximum utilization of non-depreciable resources, i.e., people and raw materials.
Typically, for intensive assembly operations, lean cells become an integral part of the entire automation solution. In general, such solutions create Manufacturing Cells operating at a high ratio of automated-to-manual work content.
In cases where assembly and testing operations require relatively light automation (just enough to ensure process capability), and where the most cost-effective solution requires manual work content, the preferred solution is typically a semi-automated lean cell. Wes-Tech refers to such cells as Ergonomic Lean Cells.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
