|
|
|
PLC with a built-in graphic display and keypad. With a rich variety of onboard I/Os, including direct temperature and weight measurement inputs.
|
|
|
|
|
|
OCS (Operator Control Station) is a robust, reliable control product that combines a traditional controller…programmed by any of the IEC 61131 programming languages…operator interface, I/O and networking into an integrated, all-in-one unit using a single software package - Cscape. The LX models have a fast 0.20mS/K typical scan rate, and a large memory capacity…supporting logic programs up to 128K logic and 32K of battery-backed registers
Using STN LCD technology, the LX models offer integrated, bright displays. The LX280 screen features eight shades of grey, while the LX300 supports 16 different colours. Both models provide far more visual readability than competing low-cost blue screen and STN colour LCDs. Plus, the LX280 and LX300 are compact, measuring 181mm wide x 139mm high and 45mm deep. This gives the added advantage of being a viable, low-cost solution for machines with small panel areas
-Single high performance processor, provides fast scan cycles. Note that scan cycle time is dependent on screen update priority which can be adjusted.
-320x240 ¼VGA 5.7" STN screen
-Five configurable function keys and touchscreen capability
-8 shades of grey or 16 colours
-Two serial ports plus optional CsCAN port.
-Supports SmartStack I/O using RCS or SmartStix I/O may be mounted up to 6000 ft (1500 meters) from the OCS
Fully compatible with Cscape 6.5 (or later) software that configures all control, I/O graphics and networking.
~Cscape™: All Units are programmable with a Free Software~
|
|
|
|
|
|
The Colour Touch range integrates a screen, PLC, Network and I/O into an "All in One" product.
Instead of using separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
8”, 10” and 12” SVGA touch screens with function keys
Due to its on-board fieldbus and Ethernet and the support for three independent serial protocols, the QX can operate as an ideal gateway between the shop-floor and your enterprise systems. The integrated CompactFlash slot facilitates easy application upgrades while also extending your storage capabilities for recipes’ data and process data logging. Furthermore, it can be utilised to store your web pages and graphics provided the built-in web-server has been activated.
The optional VIM400 video input card offers the ability to monitor 4 external video sources and capture images from within the control program. This additional capability is ideal for alarm monitoring within your application. The captured images can be easily stored on CompactFlash and retrieved later via the integrated web-server.
Our modules include the following features :-
- Screens ranging in size from 5.7" to 12.1".
- 1/4 VGA, VGA and SVGA formats
- Configurable function keys.
- High speed Screen Update and Logic Scan.
- Integrated Ethernet and Compact Flash options.
- All programmed by a single IEC61131 compliant software package - Cscape.
- Vast range of I/O Modules.
- Low cost Fibre Optic I/O Base available.
- 3 Serial Ports.
- Fieldbus Modules available.
~ Cscape™: All Units are programmable with a Free Software ~
|
|
|
|
|
|
Compact :
It is a compact, palm sized controller in
W130_H104_D70.5mm (main body only)
that efficiently utilises your workspace.
In addition, it is equipped with a 3.8 inch
LED to display graphical data as well as messages.
As this unit displays in two colours, amber and red, it can be utilised as an alarm, etc.
All-in-One :
This is a hybrid cost performance machine. Display,
operation and control functions are integrated into 1 unit that saves wiring and space
and also reduces the number of electric parts to connect with.
Multiple:
Equipped with 12-point DC inputs and 6-point transistor outputs,
it is compatible with special I/O.*
With acceleration and deceleration pulse output at a maximum of 65 kHz
and high-speed counter function performing at 100kHz as standard,
it has achieved sophisticated control functions. (*Possible to use 4-points at maximum).
Scalability :
With the EX module I/F, 2 sets of 13 types of EX modules can be added on.
That enables a high degree of customisation, more than 100 combinations,
for a diversity of needs and future expansions.
|
|
|
|
|
|
This lot of technology contains, in only 325 cm2, the capacity to manage coloured LCD displays with touch screen with dimensions between 7" and 15", matrix keyboards up to 60 keys, over 70 digital and analog I/O "on board", 4 incremental encoder, up to 2 CANopen ports and serial ports RS232 / RS485.
With the availability of USB port, it's possible to connect to the controller a mouse, a keyboard or practical memory keys accessible through File System with FAT 32 bit. Ethernet connection, on wired nets or wireless, it's made using standard protocols TCP/IP, FTP or EtherCAT; thanks to the availability of functions like OPC Server and WEB Server the controller can exchange data and information with any Windows application and it can be supervised from any place in the world connected to internet.
The possibility to manage up to 4 axis (3 interpolated) linked to low consumption and the availability of functions to execute astronomic pointing allow the use, besides usual photovoltaic biaxial plants, also in concentrated solar plants which require high precision in tracking.
This product is suitable to be customized thanks to its reduced dimensions, low consumption, wide 7" display, possibility to connect to wireless nets ZigBee, Wi-Fi or Bluetooth which allows you to realize portable devices to apply in energetic sectors, electro medical, in tracing job orders, data acquisition and production supervision.
|
|
|
|
|
|
Color me Beautiful! Vision350™ is the smallest PLC with an embedded COLOR touchpanel
This palm-size PLC offers exceptional capabilities and diverse I/O options. Its 3.5” TFT touchscreen can show over 1000 displays, with 3.5MB for images & fonts. The Vision350™ supports up to 166 I/Os via on-board and I/O expansion modules.
The Vision350™ offers a rich range of embedded features such as multiple auto-tuned PID loops, and internal 120K database for datalogging and recipe programming. Communication options include TCP/IP Ethernet, GSM/SMS, MODBUS and CANopen networking plus remote access for data acquisition and program download.
1MB Ladder code application memory (plus 3MB for images and 512K for fonts) enable the Vision350™ to run complex control and automation tasks.
The 256-color touchscreen HMI enables the display of color-coded operator instructions and red, attention-grabbing alarm screens. It can also display graphs according to historical values—to reflect trends of recorded data. Display options are almost endless with more than 1000 user-designed screens, and up to 250 images per application.
The Vision PLC/Graphic HMI series introduces an unbeatable price-performance ratio, enabling users to enjoy the advanced features of both the operator panel and the PLC, while maintaining low budget, reduced programming time and minimum wiring.
|
|
|
|
|
|
Vision570™ : PLC with Color Touchscreen HMI & Snap-in I/Os
The Vision570™ is a powerful PLC with a built-in HMI Operator Panel, comprising a 5.7” color touchscreen display. On-board I/Os can be added by simply snapping a module onto the back of the PLC; Snap-in I/O Modules come in several configurations. I/O Expansion modules enable integrating up to 171 I/Os per Vision PLC.
The Vision570™ offers a rich range of embedded features such as multiple auto-tuned PID loops, and internal 120K database for datalogging and recipe programming. Communication options include TCP/IP Ethernet, GSM/SMS, MODBUS and CANopen networking plus remote access for data acquisition and program download.
2MB Ladder code application memory (plus 6MB for images and 1MB for fonts) enable the Vision570™ to run complex control and automation tasks.
The 256-color touchscreen HMI enables the display of color-coded operator instructions and red, attention-grabbing alarm screens. It can also display graphs according to historical values—to reflect trends of recorded data. Display options are almost endless with more than 1000 user-designed screens, and up to 500 images per application.
The Vision PLC/Graphic HMI series introduces an unbeatable price-performance ratio, enabling users to enjoy the advanced features of both the operator panel and the PLC, while maintaining low budget, reduced programming time and minimum wiring.
|
|
The software integrated development environment for drive-integrated PLCs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
The software integrated development environment for drive-integrated PLCs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
|
The DataViewer is an application for viewing and analysing processed dynamic data interactively. It can be used to view either time-domain or frequency-domain calibrated data. Features include placing cross-hair cursors on the screen, toggling the display between different channels, or replaying the data to simulate live capture.
|
|
|
The SERCOS Monitor supports observation of data transmissions in SERCOS systems. For this purpose, it is inserted into the fiber optic ring as the last node preceding the controller (SERCOS master). In this way positioned, the telegrams of all nodes can be recorded and evaluated.
|
|
|
|
|
|
Perception is a 32 bit control, acquisition and analysis software designed for the Genesis and Liberty DAQ systems. It utilizes instrument control, realtime display, storage, review, analysis and report in a modular, easy to use package. Perception can also be used to review recordings from our Vision, Odyssey, DAstar and Sigma products.
Designed as the software platform of the future, Perception software will support most current and future LDS Nicolet hardware. Secure your future with the most complete range of data acquisition systems all supported by a single software suite and a team of engineers committed to continuous enhancement and expansion.
Perception Features:
Complete hardware control of Genesis and Liberty DAQ systems
Control option for BE3200 test sequencer
Control option for MultiPro and BE256 transient recorders
Playback software for Dimension 4i, VisionXP and Sigma data recorders
StatStream support for fast display of data
Freely customizable workspace
Integrates video and analog data at playback
Full set of options including analysis and reporting
Controls single or multiple instruments
Software interface for integration and customization
|
|
Astro-Med announces a powerful new PC-based strip chart display and analysis software package. Developed for telemetry facilities and other applications requiring real-time data viewing, the Everest VDiS (Visual Display Software) is a powerful tool that transforms the PC into a virtual strip chart recorder.
- Ideal for Telemetry and other real-time applications
- Display data in many different formats on your PC
- Customize the interface for your application
- Optional Look-back allows you to review previously viewed data at the same time you scroll real-time data
|
|
All COMSOL Multiphysics modeling capabilities are available through COMSOL Script. It lets you interact with models through an interactive graphical user interface, the COMSOL Desktop, for just about any analysis purpose you can think of.
COMSOL Script includes more than 600 high-level commands for data analysis and visualization. Simply save a COMSOL Multiphysics model as a Model M-file and then extend your simulating and analysis. Tailor-make your modeling through building customized user interfaces for others to access your modeling work.
Further, its command formats are MATLAB compatible; any script can be run from MATLAB for cross-disciplinary applications such as automatic control design.
|
|
Inspection report software, digital video
A full inspection report can easily be given. This may be printed or stored on CD and DVD. It integrates photo and a digital video.
Generated reports comply with the standard EN 13508-2.
KEY POINTS :
Interactive digital video (MPEG or MPEG2)
Complies with EN 13508-2 (vocabulary, codification)
Measures of distance, gradient, diameter, cirularity error and defects
Capture of 2 photos per observation
Automatic creation of :
- A diagram and a summary per section
- An overall summary and a detected defects survey
Data export to G.I.S.
Report models per type of inspection or per client.
|
|
| ... products without technical information |
| |
|
|
|
|
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
|
|
|
|
Product Guide
Temp. and Humidity recorder TR-71U/TR-72U
Single Temperature datalogger + Timer DTM-317
Daul Temperature datalogger DTM-318
0 °C ~ 50°C+/-3°C; 10 ~ 95% +/- 5%
USB Connection
One Year Continual
Use on One Set of Batteries
Simultaneous Monitoring of Multiple
Channels of Data
High Speed Data Transfer
Large Data Capacity: 8,000 Readings X 2
Channels
Adjustment Function
Accurate, Compact,
Lightweight and Affordable
Easy to Read Multi-Functional Display
Humidity/Temp Meter w/Dual Input
Model : DTM-321/DTM-322
Temp:-20°C ~ 60°C (-4°F ~ 140°F ); K-type:
-200°C ~ 1,370°C (-328°F ~ 2,498°F);
Humidity: 0 ~ 100% RH
4 Digit, Triple display.
K-type Termocouple.
Reading hold °C or °F annunciators.
MAX, MIN. function.
Auto power off.
ÄREL function. (DTM-321)
Automatic low battery indication.
RS-232 computer interface.
RS-232 cable and software for Windows( DTM-
322).
TR-71W Web Temperature Data Logger (USB)
TR-72W Web Temperature / Humidity Data
Logger (USB)
About the TR-7W Series Web Viewer
View Reading on a Cell phone
Recording Settings Monitor Current
Readings
Downloading Recorded Data Graph
Send Warning Messages by E-mail Main
Unit Settings
Wireless Lan Option Brings Flexibility &
freedom
Compact / Lightweight / Water Resistant!
No Switches means No Fuss / No Mistakes /
No Tampering
Wide Temperature Measuring Range:-60°C
to 155°C
Two Types to meet your Needs
Large Data Capacity: up to 16,000 Readings
Battery Life Good for up to
Two Years of Continued Use
Wide Selection of Recording Intervals
|
|
Datalogger ECOLOG TH1
- Connection for 1 integrated (-35°C ..+55°C; 0% ..+100% rH) orup to 2 external humidity and temperature probes (-35°C ..+70°C; 0%..100% rH) orand second temperature probe(-50°C..+140°C)
- Calibrated, exchangeable humidity and temperature probes
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys, external start, alarm reset, measured value and alarm scroll
- 1 digital input
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TH1 with white housing Part No.: 2423-W
- Ecolog TH1 EEX with approval for EEX zone 1
|
|
Data logger HygroGuard 10 / 20
- Complete, battery powered, ready to use data logger system
- Included data acquisition/configuration software
- Included data transmission cable
- High storage capacity of 120'000 data points
|
|
The DRAABE HumSpot steers and supervises the humidification of the individual zones (e.g. different areas, work areas). The simple menu guidance and the lit color display guarantee high convenient operation. Their advantages:
• Point-exact activation of the air moisturizers on falling below of the adjusted dampness desired value
• High measuring precision by digital, capacitive dampness measuring technique
• Permanent status indication of relative dampness and ambient temperature
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
