|
|
| Pluto Safety-PLC from Jokab Safety is a new ”All-masters” safety-PLC concept, which simplifies the design of safety-systems. The Pluto concept provides highest safety level according to category 4 EN 954-1. Pluto can provide an economic solution for both a single machine and big machine systems. The key difference with the Pluto-concept is that there is no Master-Slave relationship of the control units connected to the safety-bus. Every Pluto is a Master unit and it sees the other Pluto´s inputs and outputs and can use their information to make decisions about it´s own safety. This enables simple communication and simple alterations of the safety system. With our Gateway, the information from the Pluto safety-bus can be transfered to other bus-systems creating larger networks. |
|
Complete machine control – Standard-compliant and safe
.. for complex and distributed plants with up to 8 064 inputs/outputs
On complex, distributed plants, PSS programmable control systems monitor safety-related functions and/or undertake complete control of the machine - whether centralised or decentralised via the safe, open bus system SafetyBUS p.
You put together your own individual solution and can rely on a system that's completely compatible :
- Modular control systems PSSmodular
- Compact control systems PSScompact
- PSSuniversal decentralised control platform
- Decentralised input/output units, PSSdio
- PSSnet network components for SafetyBUS p
- System software and programming guides
- Fast, safe communication via SafetyBUS p |
|
Integron safety PLC systems are designed for low, medium and high risk applications, BS EN 954-1, Category 4 control equipment.
Typical applications might include, controlling two or three safety devices on a single machine through to multiple safety devices across several safety zones. |
|
The FPSC Fiessler Programmable Safety Center is a programmable electronic safety for personal protection, i.e. for safety functions. The FPSC complies with the highest safety requirements:
- SK1 through SK 4 according to EN 954-1
- SIL 1 through SIL 3 according to EN IEC 61508
- PL a through PL e according to prEN 13849-1
The product family FPSC provides maximum flexibility within its hardware and software structure. The FPSC - AD version offers the possibility to connect decentralized I/O modules via the implemented safety bus. This guarantees a modular system design that offers flexibility therefore reducing the costly and often elaborate configuration of the safe system bus.
The safety-related functions are programmable by using pre-assembled and tested software modules. The chaining
is made by simple assignment of input , i.e. output adresses. Intermediate data are stored in the temporary storage. There are various ready-to-use software modules at your disposal. For the communication with a superior control, i.e. for the operating sequence control or technology control, a serial interface is provided. The transfer of data for visualizing as well as the transfer of machine-relevant data can de realised via this interface.
The simple snap-on mechanism for fastening the items on the DIN rail in the switch cabinet considerably reduces the installation expenditure of the items of the product family.
|
|
| From 16mm to 30mm and in between, Rockwell Automation offers the broadest suite of products in the world. No matter what your push button needs are, Rockwell Automation can fill them. Allen-Bradley is well known for being a quality leader in push buttons, offering great flexibility, safety leadership, low cost of ownership, superior switching technologies, control network integration, fast delivery, and world-class support. |
|
SIF 6
The SIF6 series contains 6-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 4NO / 2NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 53.6 x 33.5 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools |
|
SIF 4
The SIF4 series contains 4-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.
- Contact mounting 3NO / 1NC
- Switching current range 5 mA to 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Low coil excitation and retention capacity
- Design (LxWxH) 41 x 29.4 x 10.9 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: access control, interfaces, transportation, robotics, machine tools |
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery |
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control |
|
SGR 282 / SIR 282
The SGR282, SGR282Z SEN, SIR282, SIR282 SEN series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.
- Contact mounting 2CO
- Switching current range 10 mA to 6 A or 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 1 W, at times 0.7 W, sensitive design
- Design (LxWxH) 30.2 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- DIN rail socket with modules, PCB socket
Areas of application: process technology, mining, sensors, interfaces |
|
SIR 8 / SIR 10
The SIR8, SIR10 series contains powerful, compact 8- and 10-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.
- Contact mounting 8- resp. 10-pole, free configurable
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 85.5 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: lifts, machine tools, farm machinery, transportation, robotics |
|
SIS 2 / SIS 3 / SIS 3 SEN
Very compact SIS2, SIS3 and SIS3 SEN series 2- and 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 1NO / 1NC or 2NO / 1NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 29.2 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control |
|
SIR4, SIR4 SEN
The SIR4, SIR4 SEN series contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.36 W or 0.6 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: process technology, lifts, machine tools, vehicle construction |
|
SIS 4 / SIS 6
Very compact SIS4, SIS6 series 4- and 6-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 3NO / 1NC or 2NO / 2NC or 4NO / 2NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 48 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: off-shore applications, interfaces, medical technology, robotics, machine tools, remote control |
|
SIR 6 / SIR SEN
The SIR6, SIR6 SEN series contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.5 W or 0.75 W
- Design (LxWxH) 58.9 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: lifts, machine tools, construction machinery, transportation, robotics |
|
SIM 2 / SIM 3 / SIM 4
The SIM2, SIM3, SIM4 series include compact 2, 4, or 6 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.
- Contact mounting 1NO / 1NC, 2NO / 1NC, 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 8 A
- Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
- Coil loss power 1 W, 0.75 W or 0.5 W
- Design (LxWxH) 24.7 or 36.1 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for DIN rail and PCB mounting
Areas of application: process technology, mining, lifting technology, interfaces, remote control |
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery |
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control |
|
SGR 282 / SIR 282
The SGR282, SGR282Z SEN, SIR282, SIR282 SEN series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.
- Contact mounting 2CO
- Switching current range 10 mA to 6 A or 8 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 1 W, at times 0.7 W, sensitive design
- Design (LxWxH) 30.2 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- DIN rail socket with modules, PCB socket
Areas of application: process technology, mining, sensors, interfaces |
|
SIR 8 / SIR 10
The SIR8, SIR10 series contains powerful, compact 8- and 10-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.
- Contact mounting 8- resp. 10-pole, free configurable
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 85.5 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: lifts, machine tools, farm machinery, transportation, robotics |
|
SIS 2 / SIS 3 / SIS 3 SEN
Very compact SIS2, SIS3 and SIS3 SEN series 2- and 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 1NO / 1NC or 2NO / 1NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 29.2 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control |
|
SIR4, SIR4 SEN
The SIR4, SIR4 SEN series contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.36 W or 0.6 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: process technology, lifts, machine tools, vehicle construction |
|
SIS 4 / SIS 6
Very compact SIS4, SIS6 series 4- and 6-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .
- Contact mounting 3NO / 1NC or 2NO / 2NC or 4NO / 2NC
- Switching current range 5 mA to 6 A
- Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
- Very low coil excitation and retention capacity
- Design (LxWxH) 48 x 16.6 x 16.5 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: off-shore applications, interfaces, medical technology, robotics, machine tools, remote control |
|
SIR 6 / SIR SEN
The SIR6, SIR6 SEN series contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges
- Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
- Switching current range 10 mA to 10 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.5 W or 0.75 W
- Design (LxWxH) 58.9 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for PCB mounting
Areas of application: lifts, machine tools, construction machinery, transportation, robotics |
|
SIM 2 / SIM 3 / SIM 4
The SIM2, SIM3, SIM4 series include compact 2, 4, or 6 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.
- Contact mounting 1NO / 1NC, 2NO / 1NC, 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 8 A
- Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
- Coil loss power 1 W, 0.75 W or 0.5 W
- Design (LxWxH) 24.7 or 36.1 x 12.7 x 25.6 mm
- Approvals: UL, cUL, SEV, TÜV
- Manipulation-protected socket for DIN rail and PCB mounting
Areas of application: process technology, mining, lifting technology, interfaces, remote control |
|
... see all the products in the category
Relays
|
|
|
see the results for the following category
