|
|
Due to their high insulation thickness, pressings are suitable
for extreme application range in terms of thermal and climatic load cases. |
|
IMPERMEABILITY: The boots are fully moulded for a perfect bond between upper and sole.
ATS (patented) SOLE:
ATS = Adhesion on all surfaces
Good adhesion on all types of surfaces (loose ground, slippery and steeply sloping floors) Adhesion factor greater than 0.15 (in compliance with NFS 73012).
U-shaped anti-fatigue heel. High shock absorption: over 20 joules. Protects the spine.
Shaped at toe and heel with special tread for sloping terrain.
Optimum cleat spacing to avoid mud and sludge build-up.
Arched non-slip grooves for ladder work.
LINING: Non-woven polyester:
rot-proof and antimycotic.
absorbent and hypoallergenic.
highly resistant to wear.
SAFETY FEATURES: Steel toe-cap and midsole conform to EN344 standard.
CHEMOSIL* coating ensures permanent, perfect interpenetration of the elastomers and the safety elements. |
|
A primary example of where ZirPro® is making a real difference is in the automotive industry.
By developing highly reactive Zirconium carrier ZirPro® is increasing both the performance and endurance of catalytic converters.
Other industrial processing benefiting from ZirPro® zirconium chemical derivatives include paint dryers, titanium oxide pigment coating and leather tanning. |
|
| The FIELDVUE® DVC6000 series digital valve controller is a communicating, microprocessor-based current-to-pneumatic instrument. The controllers can be used on single- or double-acting actuators. The digital valve controller receives feedback of the valve travel position plus supply and actuator pneumatic pressure. This allows the instrument to diagnose not only itself, but also the valve and actuator to which it is mounted. This provides you with very cost effective maintenance information, so that required maintenance can be performed on the instrument and valve when there really is a need. |
|
Your Chemical Resistant Compact Vacuum Meter for 1600 to 1 mbar
Compact vacuum meters of the VD8 family are fully electronic and combine high quality sensors and modern microcontroller technology with a handy design.
Our customers appreciate these easy-to-operate gauges as reliable tools in plant engineering, service and laboratory.
The digital display of your vacuum meter shows the exact absolute pressure. Sensors with temperature compensation and sophisticated evaluation electronics guarantee precise and reproducible measurement results.
Optionally the vacuum meters can be used as datalogger in
order to store pressure data during the measurement. By push of a button those data are easily transmitted to a PC where they can be analysed and documented for your quality assurance using our VacuGraph Windows software.
Mobile use or fixed installation? Quick spot check of actual pressure or documentation of measurements on PC? The VD8 will always be in compliance with your wishes.
Further Advantages:
- Chemical resistant cermic sensor
- Display of minimum and maximum pressure
- Automatic switch-off or continuous operation
- High battery lifetime due to clocked measurement
- Operation with battery or mains adapter
- Robust stainless steel flange |
|
Solid-metal push-in fitting with nickel and chrome plated surface. High corrosion resistance (CRC3) and chemical resistance with approval for use in the food and packaging industry. For pneumatic applications with a temperature range up to 150° C (at 6 bar), and a pressure range up to 16 bar. Versatile thanks to antistatic and flame retardant characteristics. Outside tubing diameters of 4, 6, 8, 10, and 12 mm with M5, M7 and G1/8 to G1/2 connecting thread.
Recommended tubing:
Antistatic: PUN-CM
Flame-retardant: PUN-V0
Heat-resistant: PFAN
Food zone 1: PUN-H
Resistant to cleaning agents / food zone 2: PLN
|
|
STAINLESS STEEL Line/
This line is particularly indicated to all industry, where hygienic rules have to be respected. Applications: pharmaceutical, chemical, nuclear, enological, dairy and food industry in general. |
|
Economical, Easy-to-Use Quick Disconnect Chemical Dispensing System
The DrumQuik® PRO chemical dispensing system from Colder Products Company provides safe, easy and economic extraction of chemicals from drums, jerry cans and other bulk transfer containers while helping to reduce costly spills, contain hazardous fumes and enhance workplace safety. The easy-to-use, closed-system design combines into one integrated unit a recyclable bung closure and dip-tube with a reusable quick disconnect coupler, ensuring that both sides are sealed from point-of-origin to point-of-use.
With DrumQuik PRO, users easily dispense chemicals by removing a shipping plug and then locking the coupler in place. This eliminates the need to install, remove or clean a dip-tube, minimizing the potential for fluid or vapor contact while allowing fast changeovers.
No special tools are required to connect the coupler to the system. Clean-up and disposal are easier, because the low-cost drum insert and dip-tube are recyclable. The quick disconnect coupler can be easily rinsed and cleaned for reuse.
Ideal for single-use applications, DrumQuik PRO is made from FDA-approved polyethylene material that is compatible with most general chemical uses.
|
|
ZOTEK®
The new name in high performance foams.
ZOTEK foams are a range of high performance foams manufactured, using Zotefoams%u2019 unique high-pressure nitrogen gas solution manufacturing process, from fluoropolymers, engineering polymers and speciality elastomers. |
|
| Self-Rescuers are made for rescue from hazardous situations like toxic gases, smoke, oxygen deficiency. They are particularly designed for rough environments like mining. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| From routine applications to cutting edge research, the Agilent 7500 Series is task-ready. Since the introduction of the world's first Benchtop ICP-MS in 1994, Agilent has led the way in important ICP-MS innovations making the 7500 Series the current state of the art in ICP-MS. The 7500 Series delivers the highest levels of performance for trace metals analysis, while retaining ease of use, flexibility and reliability through automation and excellence in design. Furthermore, our great products are backed by a large team of support specialists - on-hand to help you get the most from your instrument. |
|
Agilent 6100 Series Quadrupole LC/MS systems put the sensitivity, selectivity, and information content of mass spectrometry into an amazingly compact package. Four models are available:
6110 - An economical entry to the power of LC/MS
6120 - The added productivity of ion polarity switching
6130 - A research-grade LC/MS with outstanding sensitivity
6140 - Maximum performance plus fast scanning for fast chromatography and high-throughput applications |
|
| The Agilent Technologies 6220 Accurate-Mass Time-of-Flight LC/MS delivers a combination of mass accuracy, mass resolution, sensitivity, and in-spectrum dynamic range that exceeds that of comparable TOF systems. Its superlative performance is amplified by new, state-of-the-art MassHunter Workstation software with unrivaled feature extraction and data mining capabilities. Together, they provide unsurpassed confidence whether you are confirming synthetic compounds, profiling biomarkers, identifying impurities, screening food for pesticides, or characterizing intact proteins. |
|
| Agilent offers a complete portfolio of products for UV-visible spectroscopy to meet the diverse needs of analysts in routine QA/QC, research, and method development labs. The Agilent solutions are complete systems including the spectrophotometer, a PC with operating system and application software and a printer. For application specific needs the systems can be completed with additional software packages and a variety of accessories. |
|
| Agilent J&W GC Columns are designed and manufactured to offer excellent and reproducible performance for the benign to the most difficult types of samples. With the lowest bleed levels, the best inertness for acids/bases/mixed functional compounds,and the tightest column-to-column reproducibility - Agilent GC columns are of higher quality and perform better than any other columns on the market. |
|
| Agilent provides the broadest selection of gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) systems, support, and supplies in the industry. So whether you need flexible, reliable hardware and software for complex research; simple, robust systems for routine production environments; or fast, rugged portable solutions for real-time measurements in the plant or in the field, we have what you need to meet your analytical and business challenges. |
|
| Whatever your priority, speed, resolution or sensitivity, the new Agilent 1200 Series, with its flexible, modular design, ensures configurations ideally suited to meet your application requirements. Building on ZORBAX column technology and novel system design your analysis time will be shortened up to 20x. Resolution can improve as much as 60%. More intuitive user interfaces will let you instantaneously control and monitor the instrument status. New choices in data analysis offer you rapid and efficient data review tools. The Agilent diagnostic software enables Intelligent Services providing more uptime, independent of the data system in use. |
|
| ... products without technical information |
| |
|
