|
|
Types of lamella
We use three basic forms to fasten the lamellas. The different product types and their designations result from these three basic forms of fastening. The product types FASTAF/FASTAC have fixed mounted lamellas. Flexibly mounted lamellas are used in the FASTAM/FASTLAP product types. These flexibly mounted lamellas are offered in two different versions, according to the conditions of use with hinge 2) or clip 3). It is also possible to choose between versions of the hinge type with or without initial tension.
|
|
|
|
|
|
Steel Telescopic Covers
Beakbane Steel Telescopic Covers are designed to protect machine tool slideways and are precision-built for optimum efficiency. Over the last three decades, Beakbane has developed and refined its design know-how and understanding of the requirements of machine tool builders to the point where it is an acknowledged international leader in its field.
The protection of machine tool slideways is essential if machine tool accuracy is to be maintained, down time reduced, and associated maintenance costs avoided.
By working closely with machine tool builders and adjusting quickly to the demands of the latest technology, Beakbane Steel Telescopic Covers have become an integral part of many machine tool designs. We cannot stress too strongly the importance of the cover requirements being considered at the design stage if maximum efficiency and cost benefits are to be achieved.
Our computerised design programme provides data for the precision manufacture of Beakbane Covers. This ensures instant recall of all information needed for repeat orders: also, as an indication of the precision in our manufacturing procedures, it enables us to replace a damaged 'box' in a cover when required.
The individual boxes that make up each cover are interlinking, and depending on the box structure, can be sufficiently rigid to support the weight of an operator when the cover is stationary.
Wiper seals are fitted, as required, to the leading edge of all boxes with the exception of the smallest. The wiper is pressure loaded so preventing the ingress of swarf and other unwanted foreign bodies. The wiper itself is made from hardwearing polyurethane or nitrile rubber, protected in its own steel case from hot chips and swarf.
|
|
ARNO ARNOLD conceived, designs and manufactures Fix& of finish complete cover systems. Independently of size and excerpt our patented system of the rear sheet metals ensures Outside into for gap-free pressure. We can consider mechanical measured variables (statics and dynamics), as well as environmental influences (e.g. liquids, temperature and chemical reactions).
The products and systems developed by us have themselves already under extreme conditions proven in horizontal/vertical processing centers, sharpening and milling machines... etc.
|
|
|
Protective cover complete systems are supplied as overall construction assembly-fairly as unit and installed ready for use to the machine tool. ARNO ARNOLD conceived, designs and manufactures Fix& of finish systems for processing centers, cutting machine tools, deburring centers, erosion machines etc.
|
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired.
|
|
The base is standard bellows of slide, which offers an additional protection by telescopic aluminum or the steel sheet addition on request. We recommend his use in the event of intensive projections of chips hot and/or cutting.
The plates resist the acids and can be realized according to your possibilities of obstruction.
|
|
| ... products without technical information |
| |
Renishaw probe systems provide an innovative solution to improve the efficiency of your machine tools.
Tool setting can measure the size of tools before cutting starts, and to check for tool damage or breakage during the machining operation.
|
|
| ... products without technical information |
| |
To be developed the problem with the use of water-mixable Kühlschmierstoffen (among other things corrosion at the workpiece and machines, dirt deposits, high wear of tools, bacteria development), Kühlschmierstoffe were for oelheld the GmbH in the principal firm, the drive in this area new ways to be gone here and, which repair at least a substantial part of the well-known problem.
With the again developed product row AquaTec is to be eliminated it oelheld succeeded the mentioned disadvantages as far as possible. Process stability is increased at the same time clearly and additional expenses is lowered.
|
|
Metalworking Lubricants, a specialist business unit within ROCOL Lubricants Group, develop and manufacture a range of innovative fluids and lubricants whose performance is designed to meet the increasing demands placed upon today's production processes. Commitment to new product development is unrivalled with experienced chemists dedicated in formulating cutting edge technology.
ROCOL Metalworking Lubricants products benefit machine shops, precision engineers, and fabricators throughout the world in many different industries.
|
|
Metal Working
Products made for the job
Armed with its experience in industry, MOTUL TECH offers a complete modern range covering all your needs in the field of metal working.
A progressive approach
In the current context of externalization and the continuing search for improvement of performance, MOTUL TECH brings you a process, product, environment approach for achieving your technical and economic objectives. For this purpose, we propose to join forces with you in a procedure of optimization of your productivity by the overall management of your cutting fluids.
A team of professionals who will listen to you
To serve you better, MOTUL possesses a multi-skills sales team in your area and lubrication experts at your service for all assistance, from the recommendation, the application and the handling of our produc...
|
|
Higher oils ultra fluid, they are appropriate for the lubrication and the protection of all movements for high and very high speeds:
- fast pins of machine tools: grinding machines, machines with points, spinning tops.
- fast pins of textile machinery.
- mechanisms with very weak play, stages.
- hydraulic control circuit requiring of oils of very low viscosity. Oils STITCHES ms have properties anti-wear, Extrême Precision (ranks ISO VG 5 to 10) and of the emulsions.
|
|
IonoPlus Dielectric IME-MH
After long years of research oelheld introduces an entirely new, powerful concept into
dielectrics: IonoPlus IME-MH. Unlike conventional mineral oil products, this combination
of highly refined synthetic products is enriched with satellite electrodes in a special
blending process. As a truly universal dielectric, IonoPlus IME-MH is suited for all
operations from the finest finishing processes to the most effective rough cut. Besides
having the best possible effectiveness in flushing and the greatest possible disruptive
strength, it offers a whole series of unique advantages.
|
|
ETERNA 2000 is a high performances machining fluid which can be
recycled. It is general-purpose (all raw materials, all types of machining), ISO classification: MAH. Soluble fluid of machining, standard true
solution, of particularly advanced design and technology. Product
answering the Eco-design label. Guaranteed without nitrites,
borated derivatives, organochlorinated, sulphur derivatives and heavy
metals. ETERNA 2000 is chemically and biologically stable,
ultrafiltrable, reusable. The very high cooling capacity of ETERNA 2000 allows to obtain state surface of high quality in the roughing or finishing operations. Its stability and its weak retention on pieces and chips allow an important reduction of machining fluids consumption. Not foaming,
anti-corrosive, not gumming, ETERNA 2000 also makes it possible to
obtain an environment of clean working station (produced without
mineral, vegetable or synthetic oil).
|
|
|
The portable insulating oil tester DPA 75 measures the electric breakdown strength of insulating liquids.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
