|
|
The new SMAT continuously detects the position of the cylinder piston within a range of 50 mm. It has an analogue output with an output signal in proportion to the piston position. The integrated OOR (out-of-range) sensor indicates if the piston is outside the sensing range. The connection for evaluating the 0 … 10 V and/or the 4 … 20 mA signal is made directly to analogue inputs.
Typical areas of application in object detection are as follows:
Press-fitting, clamping, position sensing, workpiece replacement
In process monitoring:
Sheet metal handling/production, wear monitoring, quality inspection
- The installation direction of the SMAT in the slot can be chosen freely.
- Contactless measuring principle = wear-free sensing.
- Measuring range is always 50 mm, regardless of cylinder; reproducibility 0.1 mm.
|
|
Features
All-electronically or reed contact
MZEK... can be fitted from above
MZ C... for Cylinders with 4 mm round slots
Absolutely wear-free
High reproducibility
Metal Case
Connecting Cabel 2,5 m (5 m) PUR or 0,3 m (0,6 m) PUR with knurled connector M8
Bright LED
Short-circuit-proof
Polarity-safe
Protection class IP 67
|
|
|
Our huge standard programme with its diversity of housings has the optimal solution for almost any application. The various types of clamp or the dovetail connections directly integrated into the switch mean that the switches can be fitted on almost any type of cylinder. Our range also includes pneumatic cylinder switches for T-section cylinders. All the models can be supplied with dry reed contact with variable power capacities or in the electronic version. If you wish, we can develop completely new customer-specific sensors to meet your requirements.
|
|
|
In all automated processes the use of sensors to provide information for the plc is of prime importance. Sensors supply the necessary signals on positions, end stops, levels or serve as pulse transmitters for counting jobs or for monitoring rotational speed. In industrial usage inductive and capacitive proximity switches are indispensable. As compared to mechanical switches they offer almost ideal conditions: non-contact, maintenance-free operation, high switching frequencies and switching accuracies as well as high protection against vibration, dust and humidity. Inductive sensors detect all metals without contact, capacitive sensors detect nearly all solid and liquid media such as metal, glass, wood, plastic, water, oil, etc..
|
|
|
|
|
|
Position Sensing Solutions
Bimba offers pre-tested Position Sensing Solutions for Bimba actuators. Our solutions provide a cost effective interface between the pneumatic actuators and electrical control systems. Our pre-tested solutions also eliminate costly, time-consuming design and fabrication required if switches are purchased separately and provide an aesthetically pleasing installation.
Both traditional Bimba switches as well as newer generations of Bimba switches are offered to allow for maximum flexibility to fit your application.
The switches perform the same functions as conventional limit switches. They can be used as position indicators, cycle counters, or to confirm operation.
All Bimba switches are designed to sense a magnet that is incorporated into the piston of the cylinder. Magnets are standard in Bimba MRS cylinders, but must be purchased as an option on other Bimba actuators.
A variety of outputs are offered for each switch family including PNP (transistor sourcing), NPN (transistor sinking), normally open contacts, and higher power triac.
|
|
The RACO path-sensory system has been specially designed for exactly positioning and switching off electro-magnetic actuators in the final position. Not only is the position ascertained unconventionally by electro-magnetic means (e.g., gear-shifting mechanism) while doing so but it will also be determined via a close-coupled magnetic field without any movement.
The EPS consists of a printed circuit board and a magnetic holder with the magnet. The electronic positioning sensor (EPS) is integrated into the device%u2019s supplementary casing (A) on the motor shaft's end of the servo-motor or in the device's supplementary box (D) on the coupling casing. The installation, commissioning (starting up), maintenance (servicing) and upgrading is simplified in comparison with a conventional design that has mechanical limit switches and a shift transmission which must be adjusted individually.
|
|
Magnetic Reed Switches
Magnetic reed switches are available on nearly all air cylinders offered with Ultramation Linear Thrusters. Reed switches are actuated by the close proximity of a magnet which is included within the cylinder as part of the piston assembly. A reed switch contains a normally open sealed reed that closes or makes in the presence of a magnetic field. The reed switch returns to the normally open state once the magnetic field is removed. Reed switches, both with and without LED position indicators, are used in the vast majority of applications where the magnetic piston briefly comes to rest at each end of the stroke.
|
|
MZCK 03
general data
type magneto-resistive
version C-slots
nominal operation point 28 Gauss
electrical data
switching frequency < 200 kHz
response time / release time < 0,0025 ms
output current < 200 mA
voltage supply range +Vs 5 ... 30 VDC
mechanical data
cable output lateral
depth 9 mm
width / diameter 3,7 mm
mbient conditions
operating temperature -10 ... 70 °C
|
|
One sensor, two adjustable switching points
Saves space, time and money
Simple alignment and definition of the switching point thanks to teach process
Easy mounting with only half the cabling work
Sensor sunk into the T-slot thanks to compact design
Applications: end position query to short hoist cylinders or intermediate position detection, e.g., for reducing piston speed
|
|
sensors for cylinders
- 2- and 3-wire reed contact, electronic versions as well
- plug or cable connection
- LED indicator
- special designs on request
|
|
Designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurised environment.
Available in a choice of two mounting styles (Internal or External), these sensors can be supplied in lengths to suit actuator strokes up to 1100mm.
|
|
The UltraSensor has been designed as a next generation replacement of Proximity and Micro switch systems for monitoring spool movement in progressive divider elements.
A single model will work with all standard SMX and SMP divider blocks as a screw-on accessory without requiring special arrangement or modification to the spool.
The patented concept works by monitoring magnetic flux variations through a hall-effect sensor as the spool enters the sensing range. There are no moving parts which means the solid state device is completely wear free.
NPN and PNP connection options are standard within the same sensor.
|
|
Designed specifically for use in hydraulic and pneumatic actuator
applications, where the transducer is fitted inside the pressurised
environment. Can operate at pressures of 670 Bar and temperatures of +200C.
Seperate electronics module operates from 10-60Vdc.
Available in a choice of mounting styles (Internal or External), these
transducers can be supplied to suit actuator strokes up to 2000mm.
|
|
WaveScale Linear Displacement Transducers are an enhancement of the Series 2HX Electrohydraulic Actuators. Cylinders with the WaveScale meet standard NFPA heavy duty hydraulic cylinder dimensions, 2” to 6” bore with a male piston rod end. The main advantage is no false stage is required for cap mounts. The overall length of the cylinder is not increased!
3000 PSI Operating Pressure
Non-Linearity: ±0.02% of cylinder stroke or
±0.004 inch, whichever is greater.
Repeatability: Equal to resolution
Input Voltage: +24 VDC
Standard Operating Temperature: -40° F to 185° F.
Cylinder Stroke Length: Up to 100 inches.
Multiple Output: Analog - Voltage or Current
Digital - Start/Stop or PWM
|
|
| ... products without technical information |
| |
ASTRO gear motor with flat transmission ASM SG01
|
|
ASTRO synchronous motor with Stirnradgeriebe ASM SG
- starting and direction of rotation-stably
- synchronous, load-independent number of revolutions
- blockierfest briefly
- 1-polig reversable
- high efficiency
- noiseless run
- high self retaining moment
- maintenance-free
Overall lengths
ASM 24/26 SG = 89,5mm
ASM 44/46 SG = 109,5mm
ASM 84/86 SG = 149,5mm
Terminal box execution = 33mm longer
Engine system
4-polig with 1.500Upm (50Hz), 1800Upm (60Hz)
with 6 pins with 1.000Upm (50Hz), 1200Upm (60Hz)
Rated voltages = 1~24V to 3~500V
Continuous operation S1 (special modes of operation possible)
Self retaining moment in the dead condition
Wärmeklasse B
Coil windings = to 130°C
Ambient temperatures = -15C to 40°C
Enclosure = IP40, IP54, IP55
Basic parts = plastic or aluminum pressure pouring
Kind of connection = cable, braid or terminal box connection
|
|
Technical Description. Motor casing: Deep drawn, corrossion protected. Excitation field: Permanentmagnet. Method of bearing, A-side: Ball bearing, sleeve bearing optional. Method of bearing, B-side: Sleeve bearing. Gear: Worm gear.
Gear housing: Aluminium die cast. Gear wheel: plastic. Gear greasing:
Lubricant/permanent lubrication. Mechanic interface: Output shaft. Electric interface: Connector.
|
|
|
Technical Description. Motor casing: rolled, corrossion protected Excitation field: Permanentmagnet. Method of bearing, A-side: Sleeve bearing. Method of bearing, B-side: Sleeve bearing. Gear: Spur gear. Gear housing: plastic. Gear wheel: plastic. Gear greasing: lubricant/permanent lubrication. Mechanic interface: Output shaft. Electric interface: Connector or leads with connector.
|
|
165855 Cylinder Pressure Transducer
Intended specifically for use with the Bently Nevada 3500/77M Recip Cylinder Pressure Monitor when real-time, continuous monitoring of cylinder performance is required on reciprocating compressors. It is able to withstand the extreme temperatures and pressure cycling of reciprocating compressor cylinders while providing reliable measurements. It also incorporates innovative materials and construction techniques that allow it to survive in the harsh chemical environments typically encountered in reciprocating compressor applications, such as hydrogen sulfide (H2S). The transducer has undergone extensive testing and is unique in the industry, carrying a 3-year warranty. It is available with a number of adapters, allowing it to be used with many existing pressure indicator valves (e.g., Kiene* valves).
|
|
Water-cooled cylinder pressure sensor, thermal shock optimized double diaphragm, long service life due to TiN coating and metal cable. Changes with respect to Type 6067B: optimized mounting sleeve for simple sensor removal.
The miniature sensor Type 6067C is particularly suitable for thermodynamic measurements where there is insufficient space for mounting sensor Type 6061B (M10). Its excellent linearity over the entire range and high sensitivity also allow gas exchange investigations with good accuracy.
|
|
|
Senses pressures of fluids/gasses, on engines and other industrial equipment. Models are available to detect discharge pressure across compressors and pumps, as well as filter clogs and pump cavitation.
|
|
| ... products without technical information |
| |
Material : St 52 bk + s, St 52.0
St 52-3N, StE 460 nbk ::Tol. OD DIN 2391; 2448
Tol. WD DIN 2391; 2448
Tol. ID ISO-Tolerance Field H8 - H11
Center Line Average of Interior Surface honed Ra max. 0,5 µm
roller burnished Ra max. 0,4 µm
Dimensional Range: ID ø20 - 500 mm, larger dimensions on request
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
