|
|
Analog Sensor
Technological applications: monitoring of positioning, movement, deformation (detectors with analog output signal).
|
|
Features:
- Available in flush mountable body style
- Nickel plated housing with IP67 and IP69 protection rating
- Sensing distance of 2 mm (0.078” to 15 mm (0.591”)
Capacitive proximity sensors are ideal for sensing non-metal objects or for level control of fluids and granular material.
Adjustment can be used to zero out the presence of an object allowing the sensor to sense "through" a bulk material or liquid level.
The operating distance of a capacitive sensor is related to the dielectric constant (εr) of the object material to be detected. The higher the value of εr, the easier the detection of the object will be. The object to be detected through must have a lower εr value.
The threshold level is adjustable via a 20-turn potentiometer located at the rear of the sensor
|
|
|
|
|
|
Features:
Narrow, 7° sonic beam
High resolution 500 KHz ultrasonic frequency
Fast response - as fast as 1.5 ms sampling rate
Self-contained, 18mm barrel or flat-profile housing styles
Field programmable capability in 18 mm and flat-profile models
DeviceNet capability available in flat-profile models
CE Certified
When short-range sensing applications demand repeatable and reliable On/Off control performance, the high-frequency, fixed-window SUPERPROX® Model SM600 Series ultrasonic proximity sensors are the ideal solution. These noncontact, self-contained sensors are unmatched for the reliable detection of objects of all kinds, transparent or opaque, liquid or solid, and as small as 1.6 mm (0.06") rod diameter, regardless of color or shape. Offering a variety of sensing ranges, up to 305 mm (12"), and fixed sensing windows, this series provides for the convenient placement of SM600 sensors throughout the plant.
Given the capability to “back off” from formerly “nearly-touching” mounting positions, these sensors are the solution for such applications as: metal parts as close as 25 mm (1"), moving back-to-back at speeds in excess of 2000 per minute. Others include: cap presence and/or tilt detection, fill-level checking, fill-tube-presence monitoring, downed container detection, case inspection, detection of container edges, web monitoring and CD case inspection where opacity, color and height vary, and wherever there’s a need to upgrade a metal prox function.
|
|
Osiprox XS6 Auto-adaptable 12 mm Barrel Inductive Sensor
Features:
Auto-Adaptable Capability
Self-contained, 12 mm housing style
Sensing Range up to 9 mm (.35")
UL Approved
CE Approved
|
|
|
|
|
|
Features:
Sensing ranges of 1m (39"), 2m (79") and 8m (26')
Reliable detection with simple On/Off control of the output
Easy pushbutton setup or optional hand-held setup/display accessory available for all
Self-contained, 30 mm barrel, in either ULTEM® plastic or SS303 stainless steel housing
Resistant to caustic materials and harsh environments
Field programmable capability
DeviceNet capability
CE Certified
Whether the object being detected is just a few inches from the sensor or as far away as 26 feet, or the application calls for a specific sensor configuration, the SUPERPROX® Model SM900 series of ultrasonic sensors offers a variety of proximity sensing solutions. There is the mounting convenience of a 30 mm housing, sensing ranges of 1 m (39"), 2 m (79"), and a long-range
8 meters (26'), the shortest deadbands in the sensing industry, and unique factory configurability to meet the user’s needs. In addition to sensing ranges, model selections include Normally-Open or Normally-Closed NPN and PNP outputs, Complementary NPN or Complementary PNP outputs, and a variety of response times and default sensing window setup limits. By using the Model Reference Guide to select the specific model required, the user is assured of a reliable, cost-effective proximity sensing solution for a multitude of applications.
|
|
|
|
|
|
Features:
Self-contained, 12 mm, threaded barrel, or flat-profile housing styles
Extended sensing range of 102 mm (4.0")
Field Programmable capability
All-material, proximity sensing capability
CE Certified
Use the highly versatile SUPERPROX® Model SM300 Series of proximity sensors as a replacement for inductive proximity sensors and fixed-field photoelectric sensors. Its long range, small size, fast response, performance, reliability and low cost, offers a simple, easy to use, once-and-for-all solution to many of the proximity sensing problems encountered daily in almost every industry.
The SM300 proximity sensor provides reliable detection of objects up to 102 mm (4") from the sensor face, performance unmatched by other proximity sensors of the same size or larger. At this distance, the sensor is safely out of harm’s way, an especially important cost savings benefit. Easy to install, the SM300 is available in two different housing styles: the 12 mm threaded barrel or the "flat-profile" housing both available in ULTEM® plastic. As with all SUPERPROX® sensors, cable and connector styles are available.
|
|
Features:
Self contained
Meets NEMA 4X/IP67 standards
Survives harsh environments
No sensitivity adjustments
Sensing ranges up to 1829 mm (72")
In response to problems directly attributed to the harsh environments in which sensors operate today, Hyde Park offers broad application solutions with this industry-proven line of ultrasonic thru-beam sensors. First produced in 1974, the MICROSONIC® SM100 Series sensors is the "workhorse" of the Hyde Park product line with tens of thousands of units continuing to perform a variety of thru-beam sensing functions throughout the world.
Using the world’s leading ultrasonic sensing technology, the MICROSONIC® SM100 Series sensors performs precise object detection...from transparent containers to metal parts as small as 6.4 mm (1/4") diameter at speeds in excess of 2000 units per minute.
|
|
Major advantages of this temperature sensor are its high accuracy and the long service life. The sensor can be modified to the customer 's needs regarding measuring range and accuracy.
The response time is less than 5 seconds. A temperature sensor with a wider range is available as well as a submersible sensor (see reverse side of the data sheet).
|
|
| ... products without technical information |
| |
|
|
|
|
BDBG-09 / IT-09T
Detecting unit of gamma radiation BDBG-09 with information panel IT-09T for constant monitoring
Purpose of use:
-measurement of ambient equivalent dose rate (EDR) of gamma radiation;
-displaying of measurement results of ambient equivalent dose rate of gamma radiation (EDR) that have been obtained from the BDBG-09 detecting unit of gamma radiation;
-displaying of current time;
-displaying of ambient air temperature;
-audio and light alarm at threshold levels exceeding of gamma radiation ERD.
Features:
-Data exchange between the detecting unit and the data panel through RS-485 interface;
-Constant self-testing of BDBG-09;
-Availability of the statistical accuracy of measurement;
-Protection jacket of BDBG-09 is IP67;
-Average service life of the detecting unit BDBG-09 is not less than 10 years;
-EDR display range of IT-09T, µSv/h, 0,1...10(7);
-Ambient air temperature display range of IT-09T from - 40 to + 50C;
-The possibility of programming of three threshold levels for IT-09T within the range of 0.01 µSv/h to 9.99 µSv/h with discreteness of 0.01 µSv/h;
-Threshold levels exceeding signaling - audio (with different soundings for every threshold level), and light (color change of EDR measurement result display);
-The possibility of operation in the network via RS485 interface for IT-09T;
-Power supply of IT-09T from industrial network (220 V) through power adapter;
-Operating mode of IT-09T is 24 hours continuous;
-Mounting method of IT-09T is upright wall-mounted.
Delivery kit:
-IT-09T data panel;
-connecting cable;
-power adapter from 220 V network;
-operating manual;
-BDBG-09 detecting unit of gamma radiation kit.
|
|
The GammaRAE II-R is two instruments in one: it has the rapid response of a detector and the accurate dose measurement of a dosimeter. It is designed specifically to meet the needs of first responders.
This instrument contains two separate sensors. The Cesium Iodide (CsI) scintillator provides a fast, two-second response to radiological threats, while the energy-compensated PIN diode provides high dose rate range coverage and accurate dose measurements.
The GammaRAE II-R accumulates accurate total dose. Stored dosage data can be cumulative or reset for each use period. It alerts the wearer with a loud audible alarm, big, bright flashing LEDs, and a built-in vibration alarm. For stealth operations, law enforcement personnel can disable each alarm individually.
Immersible (IP67) design makes for reliable operation in wet environments and easy decontamination. IS certification permits operation in potentially flammable/explosive environments.
|
|
|
Magnetostrictive level sensors take advantage of the magnetostrictive technology for measuring product level, interface and temperature variations using to the float principle.
|
|
| ... products without technical information |
| |
The turbidity sensor uses a combination of transmission and 90° scattering in a flow-through system. The two photodetectors for scattered and transmitted light and the light source (IR-LED) are situated in a flow-through system made of stainless steel (V4A).
It can be used to determine the turbidity of fresh water and seawater or other liquids and is designed to be part of a flow-system that is optimised for water quality monitoring.
The sensor can be modified to the customer's needs regarding measuring range and accuracy. The response time is less than 5 seconds. The turbidity sensor provides the sensitivity, accuracy and long-term stability required for the continuous measurement of turbidity in estuaries and lagoons.
|
|
|
|
|
|
The LevelPRO features menu driven setup, a scintillation detector, and an integrated transmitter/detector design. We also offer a full service approach to gamma gauging, starting with installation, training, on-site service, and including decommissioning and source disposal.
Features and Benefits:
- Non-contacting design makes the LevelPRO ideal for abrasive, corrosive, high pressure and high temperature applications.
- Integrated transmitter/detector reduces installation and wiring costs.
- Unique gamma transmission technology is unaffected by process variables such as pressure, temperature, viscosity or density.
- Scintillation detector sensitivity provides high accuracy with small sources sizes. Typical LevelPRO repeatability is 0.5% of the detector span.
- Input for gas/vapor density or buildup compensation.
- Easy to set up using "plain English" menu system.
- Outputs include level, volume and rate in any user-selected units.
- Hart Smart communications available.
- FMRC, CSA/ATEX approved.
|
|
|
|
|
|
The Loma X4 range of X-ray inspection systems for the food and packaging industries. It is the most advanced on the market today. All models are highly sensitive to detection of metallic and non-metallic contaminants such as glass, stone, calcified bone, high-density plastics and rubber. Loma X4 X-ray inspection systems are robust, reliable, hygienic and simple to use.
Product Features
Technology
- Windows XP operating system
- Industrial PC
- 40Gb HDD
- 16bit scaleable high speed/high gain array, over 3 times more sensitive than existing detectors
- 2000 scans per second, even on the widest systems
Construction
- Bead blast stainless steel as standard
- Compact, length 2.1 m or 93"
- Hinged covers allows easy access for cleaning
- Totally enclosed cabinet, IP66 NEMA4X version
- Easy access to serviceable components
- Designed to exceed global radiation safety regulations
Transport
- Flat belt - belt return under array
- 370 W (0.5HP) motor
Reject mechanisms
Reject mechanisms are available to suit the application. The standard options are:
- Air blast - up to 1 kg (2.2lb)
- Dual Air blast - up to 2kg (4.4lb)
- Pusher - up to 10 kg (22lb)
- Signal only - for remote rejects
Options
- Infeed guides
- Full length guides
- Reject confirmation
- Bin full sensing
- Wheels
- Multi lane simultaneous inspection
- Radiation survey meter
- Modem support
Network communications
|
|
| ... products without technical information |
| |
The remarkable features of this oxygen sensor are its extremely long service life and the low maintenance costs due to its long-term adjustment and cleaning intervals.
The adjustment can be done in air or in saturated water without any calibration tables. The replacement of the galvanic cell is simplified by the design of the sensor. The membrane is very durable and is almost unbreak-able (100 µm membrane thickness).
Newly developed sensor electronics enable the oxygen sensor to work without an additional storage battery. The sensor can be modified to customer's needs regarding measuring range and accuracy.
The response time is less than 2 minutes.
The sensor can be immersed directly in water courses or tanks and does not need regular maintenance. The sensor is also available in combination with a temperature sensor.
|
|
|
Easy Management of RFID Systems. With SIMATIC RF-MANAGER, we offer integrated software solution for SIMATIC RF600, from the acquisition level right up to the ERP and MES levels. SIMATIC RF-MANAGER stands for efficient engineering and smooth operation. What possibilities does this open up for you in the UHF range? You can commission readers quickly and simply, pre-process tag data effectively, manage individual devices – and save significant time and overhead!
|
|
Honeywell Shifters
Rugged Construction. Custom Solutions. Honeywell shifters are crafted for enhanced off-highway application performance, precision, direction, and speed control. Our electromechanical shifters are completely sealed and built to withstand rugged conditions and harsh environments.
-Rugged construction
-Custom Solutions.
-Completely sealed versions available
-Built to withstand harsh environments
But more importantly, our engineers offer industry-leading design experience and expertise — for customized solutions to meet any of your exacting specifications.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
Whichever RFID system you connect to SIMATIC PLCs, PCs or PLCs from other manufacturers: the communication module provides for the necessary adaptation. In doing so, communication modules can be employed both for production and logistics applications. With the function block FC/FB 45, the readers of all RFID systems can be handled standardized. This ensures that existing RFID applications are operational immediately and do not have to be rewritten when another reader type is used.
Optimal integration into the SIMATIC world (TIA)
- ASM 456 for PROFIBUS
- RF180C for PROFINET
- RF170C for distributed I/O ET 200pro
- ASM 475 for SIMATIC S7-300 and ET 200M
Various connector concepts (e.g. M12, RJ45 or ECOFAST) for the application connection
Comprehensive diagnostics functions
Firmware update via the SIMATIC Manager
Identical and convenient programming of all RFID systems from within the SIMATIC PLC
Easy, central management of all RFID components through the "Identification & Maintenance" functions
Connection of the RFID systems to PCs and PLCs from other manufacturers by support of the RFID standard profile
|
|
Function
Read/Write operations on electronic tags and diagnostics on compact stations
Operating Systems
Microsoft Windows CE.NET Professional version 4.2
Terminal Type
XGSTP401
|
|
Whether for stock, logistics and distribution, assembly lines and industrial production or for transportation logistics, traffic-control systems and object-positioning - Siemens A&D has always the suitable identification system.
The clever electronic RFID-systems SIMATIC RF with perfect coordinated components identify safely, quickly and efficiently. The non-contact data transfer offers high industry efficiency and the simple systems integration allows an efficient integration into the automation as well as into the IT-field.
|
|
|
|
see the results for the following category : 
