|
|
Low cost and compact due to PMD technology:
- Non-contact distance measurement up to a range of 10 m.
- PMD Smart Pixel with integrated signal evaluation.
- Visible red light class II laser for easy alignment.
- 4-digit alphanumeric display.
- Simple set-up, installed and adjusted within seconds.
- 2 adjustable switch points, switching and analogue outputs.
- Robust and compact metal housing for industrial applications.
- Excellent price / performance ratio.
|
|
|
|
|
|
With our new Laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal.
|
|
|
The Microtrak II is a state of the art CMOS laser triangulation sensor for precise measurements of displacement, position, vibration and thickness. It is unaffected by surface texture, color or stray light. Measurement ranges are up to 40 mm at a standoff distance of 120 mm.
|
|
Reference: P 925 L1 AN S - P 925 L2 AN S - P 925 L3 AN S
Sensing distance :
P 925 L1 AN S : 40 to 60 mm
P 925 L2 AN S : 45 to 85 mm
P 925 L3 AN S :
Supply : 18 to 28 VDC
Output : analogical 0...10 V
Description
Detection indication by LED
Red pulsed visible light
Laser class 2
Minimum resolution : 0,01 mm
Analogical output 0...10 V
Antichock ABS Housing
Orientable M12 connector
Applications
Position control of an arm robot
Thickness measurement of thickness pieces
|
|
Distance sensor FT 92 ILA-PSL5
Large scanning distances and working
ranges (proximity version up to 6 m on
white objects, 30 m on refl ector)
High repeatability
High measuring rates
Very good cost-performance ratio
Optional red pilot laser
2 PNP signal outputs
1 analogue output 4 ... 20 mA
All outputs in the measuring range
freely adjustable
Standard M12 plug
laser protection class 2
|
|
The laser distance sensors of the L-LAS-LT and L-LAS-LT-MS series determine the distance or thickness of objects with highest accuracy. By way of a master/slave sensor arrangement, two laser distance sensors are evaluated by a controller that is integrated in the master sensor. A special version is available for optically transparent objects (flat glass, foils, wafers).
The laser distance sensor can be easily parameterised with the Windows® user interface L-LAS-LT-Scope or L-LAS-LT-MS-Scope.
|
|
Reference: PS1 L 965 S
Sensing distance adjustable from 50 to 300 mm
Supply : 10 / 30 VDC
Outputs : PNP / NPN
Time-delay of output signal
High accuracy
Description
Emission by visible red light
Spot size by adjustable focus
Distance adjustment by precision screw
Direct and inverse function
Programmable timer to 40 ms max
Class 2 LASER
On / Off function
Applications :
Control of small parts on a production machine
Detection of compenents on a printed circuit
Presence control of crack in a part
Level control
Elimination of background
|
|
World's First Datum Algorithm
• Stable Detection of Metal Targets
• Stable Detection of Black Targets (Rubber)
• Ultra-Long Range up to 1m (39.37")
• Tough, Rugged: IP-67 Enclosure Rating
The NEW GV Series Digital CMOS Laser Sensor provides unmatched performance, even on metal and black (rubber) targets. Multiple models available to meet all your laser sensing needs.
|
|
ODS Blue-line sensors is the price leader in high performance non-contact measuring.
The ODS Blue-line sensors is a very price competitive series of high quality optical laser sensors, especially designed to meet demands from machine builders worldwide. The result is unsurpassed value for money, based on a simple mechanical layout, but at the same time living up to the well known high ODS-standards of measuring accuracy and rugged durability.
The applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to everywhere a non-contact precision measurement is advantageous.
The ODS Blue-line is a good example of DSE’s efforts in customization. In addition to the competitive program of ODS sensors and O2DS scanners, DSE design and manufacture special sensors to customer defined specifications.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
Measuring sensors
Measuring optosensory technology offers an unusual performance spectrum. Depending on the field of application, modern optosensors make use of different measurement principles such as triangulation, phase shift or pulse propagation time to measure distances. Measurement takes place either directly to an object or to a reflector. Leuze electronic also offers positioning systems which determine positions using a barcode tape.
|
|
|
|
|
|
HL-C1 sensors
The laser displacement sensor HL-C1 has reached the highest level in its class. Even when sensing difficult objects such as black rubber or very shiny objects, the sensor has no problems maintaining stable and consistent results. Through the fusion of our unique newly developed optical system, linear image sensor methodology and high-speed sampling technology, a wide variety of objects can now be stably measured with great precision at ultra high speeds. This new sensor is developed for use in almost all fields of industry like tyre manufacturing or semiconductor production (wafers, printed circuit boards).
HL-C1 controller
The compact and multifunctional controller unit HL-C1CM again shows how powerful this new sensor series is. A flexible combination of controller and sensor heads allows cost-effective service and maintenance. Even in production changeovers, i.e. when the distance to be measured changes, only the head has to be exchanged. Another industry first is a compact touch panel that allows you to conveniently make settings and display data. Up to two sensor heads can communicate with one controller. Together with the touch panel, results can be calculated, e.g. for thickness or difference measurement. Moreover, all adjustments and results can be transmitted via RS232 to a normal PC.
|
|
|
|
|
|
If you will measure distances, profiles, form, surface, thickness online fast, non contactless and with a high precision, Eltrotec sensors offers a wide range of laser measure sensors for industrial process measurement.
More than 20 years experience quarantees the knowledge for a lot of different applications customers had to do every day (All the laser beam has protection class 2).
Several sensor types are available to solve specific problems as there are:
a.) shiny or glossy surfaces
b.) black, blank rubber and dark surfaces
c.) surfaces in variation of black and white (colours)
d.) hot metals where you need bigger distances and high temp. sensor.
e.) distance measuring where the machine creates vibration, shock or magnetic fields
range: 5, 10, 20, 50, 100, 200 mm (250 mm is shock protected)
resolution: 0,5 µm - 40 µm
interface: 4-20mA / 1-5VDC
RS232 included
princip: CCD-Chip with integrated signal prozessor
frequency: 1000Hz
(best results with this sensor if there are fast changing interfaces in reflection of surface)
Spot diameter: typ. 100-200 µm depends on distance
|
|
The laser distance-meter LMC-J-0310 is robustly engineered especially for industrial applications. It works at distances up to 3000 m. Up to 300m and more (depending on target reflectivity) no special reflector is needed. Measuring values are provided continuously via the integrated RS422/RS232 or analogue 4..20 mA interfaces. As option, ProfiBus and SSI interface is available. In this way the device is providing position and velocity information during the production process.
The LMC-J-0310 can be used in distance and speed measurement mode. All measuring parameters are adjustable. The high measuring speed allows the distance measurement of extremely fast moving objects.
The operation principle of the LMC-J-0310 is time delay measurement, the measuring time is adjustable between 0,5 and 1000 ms (a special version with 0,1ms is also available). Within a fraction of second one distance measurement is obtained by means of several hundreds or thousands of individual measures.
|
|
|
|
|
|
The LMC-J-0050-x is an opto-electronic distance measuring module for industrial application. The device uses a contact less measurement technique based on comparative phase measurement with amplitude modulation. The laser diode has a divergence of 0.6 mrad for measurement with pinpoint accuracy.
The measurement data is available through different interfaces for further processing. A digital switching output and an analogue output (4..20mA) are also available. The sensor alignment can easily be achieved using the red laser spot.
The sensor is built in a IP 66 housing which is made for heavy industry area. It includes a special dust protection chamber, which keeps the sensor window much longer clean. As ad on, water cooling and air purge nozzles are available. A heat filter is already built in.
- Multi-Bus
- Measuring distances with millimeter accuracy
- Accurate Positioning
- Motion detection / Contour detection
- Level gauging
- Measures surfaces up to 1250 °C
- Width measurement without additional equipment
|
|
| ... products without technical information |
| |
EOSINT M 270 builds metal parts using Direct Metal Laser-Sintering (DMLS). The technology fuses metal powder into a solid part by melting it locally using a focussed laser beam. The parts are built up additively layer by layer. Even highly complex geometries are created directly from 3D CAD data, fully automatically, in just a few hours and without any tooling. It is a net-shape process, producing parts with high accuracy and detail resolution, good surface quality and excellent mechanical properties.
|
|
The EOSINT P 730 is an advancement of the EOSINT P 700, the world-wide first double-laser system for laser-sintering of plastics. It is one of the largest plastic laser-sintering systems available on the market. The EOSINT P 730 is up to 40 percent more productive compared to the EOSINT P 700 and combines increased productivity with highest part quality. IntelliScan 20, a digital scanner of the latest generation, exposes the respective layers in a so-far unknown speed and stands for highest precision. The system is ideally suited for the economic production of small series and individualised products, especially with complex geometries. At the same time it provides capacity for the fast and flexible creation of prototypes or patterns for investment and vacuum casting. Within a very short time, the machine also produces large and complex plastic products or castings. These often occur in the automotive, medical and aerospace industry.
|
|
The EOSINT S 750 is the only double laser-sintering system world-wide for the processing of Croning moulding material. Using the DirectCast method, the system builds cores and moulds for sand casting. Directly from CAD data, fully automatically, with a building speed of up to 2,500 cm3/h (0.09 ft3/h.) and without any tooling. Sand parts of any complexity are built layer by layer, with high accuracy, detail resolution and surface quality. The maximum part size adds up to 720 mm x 380 mm x 380 mm (28.4 x 15 x 15 in.). The resulting cores or core packages are realized with significant savings in time and costs compared to conventional technologies. Usually they also consist of less parts which are thus assembled faster and more precisely.
|
|
PXS Dental puts forward a rapid manufacturing solution for fixed prostheses using laser sintering directly usable by dental laboratories.
This new system enables dental laboratories to access to a technology until now restricted to production centers.
|
|
PM100T Dental is the first rapid manufacturing system using laser sintering of powder developped for production centers of dental prostheses.
It enables to produce directly by addition of material and without tooling crowns, capes and bridges up to 16 elements.
|
|
EOSINT M 270 builds metal parts using Direct Metal Laser-Sintering (DMLS). The technology fuses metal powder into a solid part by melting it locally using a focussed laser beam. The parts are built up additively layer by layer. Even highly complex geometries are created directly from 3D CAD data, fully automatically, in just a few hours and without any tooling. It is a net-shape process, producing parts with high accuracy and detail resolution, good surface quality and excellent mechanical properties.
|
|
|
LENS is an inherently more efficient approach that reduces production costs and speeds time to market for high-value components. In addition to economic advantages, the LENS system enables the fabrication of novel shapes, hollow structures, and material gradients that are not otherwise feasible. LENS can even be used to add features to cast or forged parts.
|
|
PM250 is a prototyping and rapid manufacturing system using laser sintering adjustable metal-ceramics.
It makes available to the users a parametrable system with multiple setting ranges tapping into the full potential of metallurgy.
|
|
The PM100T system is the first laser sintering equipment adapted for the industrialists who mainly manufacture small parts.
- Use of standard fine powders
- Customizable layering system
- High reliable fiber laser
- Integrated CAD/CAM
|
|
|
Specially dedicated to rapid manufacturing of metal parts, PXL system represents a new step of development of « Phenix » laser sintering process. This new equipment is focusing on productivity, liability, ergonomics and safety to be perfectly adapted to an industrial environment.
|
|
|
|
|
|
Choose the solid imaging solution trusted the world over. Leading manufacturers - BMW, Boeing, NASA, Reebok - and service bureaus throughout the world count on our SLS® systems to quickly produce three-dimensional prototypes, parts, molds, tools, and casting patterns.
Create parts and physical prototypes fast - by skipping the tooling step. The SLS system and materials enable you to create durable, metal, plastic, or rubber-like parts directly from any solid CAD model in as little as one day - and without dependence on costly tooling or skilled labor.
Beat your competition to market. With the SLS system your product development team can create better products in less time. Create complex tooling inserts that are ready to use in days, not weeks. Test parts for form, fit, and function off working prototypes - and identify errors early in the design process, prior to manufacturing. And count on 3D Systems for the training, support, and solid imaging solutions you need to tackle any application.
|
|
EOSINT P 390 offers economical solutions for a broad range of applications. It is a highly productive system for processing thermoplastics. The machine manufactures plastic products of any complexity from polyamide or polystyrene materials directly from CAD data and within a very short time. Especially for individualized products or for products with complex geometries the machine unleashes its full potential. IntelliScan 20, a digital scanner of the latest generation, exposes the respective layers in a so-far unknown speed and stands for highest precision.
|
|
|
LENS 750 system is designed for rapid manufacturing of metal components in state-of-the-art materials such as titanium, stainless steel, and Inconel®. The LENS 750 system offers a 300 mm cubed work envelope, making it ideal for the manufacture or repair of smaller components. LENS systems use energy from a high-power laser to build up structures one layer at a time directly from powdered metals. The resulting fully functional three-dimensional components have mechanical properties that can be equivalent or even superior to wrought materials. LENS systems can be used throughout the entire product lifecycle for applications ranging from functional prototyping to rapid manufacturing or repair.
|
|
|
|
see the results for the following category : 
