|
|
Low cost and compact due to PMD technology:
- Non-contact distance measurement up to a range of 10 m.
- PMD Smart Pixel with integrated signal evaluation.
- Visible red light class II laser for easy alignment.
- 4-digit alphanumeric display.
- Simple set-up, installed and adjusted within seconds.
- 2 adjustable switch points, switching and analogue outputs.
- Robust and compact metal housing for industrial applications.
- Excellent price / performance ratio.
|
|
|
|
|
|
With our new Laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal.
|
|
|
The Microtrak II is a state of the art CMOS laser triangulation sensor for precise measurements of displacement, position, vibration and thickness. It is unaffected by surface texture, color or stray light. Measurement ranges are up to 40 mm at a standoff distance of 120 mm.
|
|
Reference: P 925 L1 AN S - P 925 L2 AN S - P 925 L3 AN S
Sensing distance :
P 925 L1 AN S : 40 to 60 mm
P 925 L2 AN S : 45 to 85 mm
P 925 L3 AN S :
Supply : 18 to 28 VDC
Output : analogical 0...10 V
Description
Detection indication by LED
Red pulsed visible light
Laser class 2
Minimum resolution : 0,01 mm
Analogical output 0...10 V
Antichock ABS Housing
Orientable M12 connector
Applications
Position control of an arm robot
Thickness measurement of thickness pieces
|
|
Distance sensor FT 92 ILA-PSL5
Large scanning distances and working
ranges (proximity version up to 6 m on
white objects, 30 m on refl ector)
High repeatability
High measuring rates
Very good cost-performance ratio
Optional red pilot laser
2 PNP signal outputs
1 analogue output 4 ... 20 mA
All outputs in the measuring range
freely adjustable
Standard M12 plug
laser protection class 2
|
|
The laser distance sensors of the L-LAS-LT and L-LAS-LT-MS series determine the distance or thickness of objects with highest accuracy. By way of a master/slave sensor arrangement, two laser distance sensors are evaluated by a controller that is integrated in the master sensor. A special version is available for optically transparent objects (flat glass, foils, wafers).
The laser distance sensor can be easily parameterised with the Windows® user interface L-LAS-LT-Scope or L-LAS-LT-MS-Scope.
|
|
Reference: PS1 L 965 S
Sensing distance adjustable from 50 to 300 mm
Supply : 10 / 30 VDC
Outputs : PNP / NPN
Time-delay of output signal
High accuracy
Description
Emission by visible red light
Spot size by adjustable focus
Distance adjustment by precision screw
Direct and inverse function
Programmable timer to 40 ms max
Class 2 LASER
On / Off function
Applications :
Control of small parts on a production machine
Detection of compenents on a printed circuit
Presence control of crack in a part
Level control
Elimination of background
|
|
World's First Datum Algorithm
• Stable Detection of Metal Targets
• Stable Detection of Black Targets (Rubber)
• Ultra-Long Range up to 1m (39.37")
• Tough, Rugged: IP-67 Enclosure Rating
The NEW GV Series Digital CMOS Laser Sensor provides unmatched performance, even on metal and black (rubber) targets. Multiple models available to meet all your laser sensing needs.
|
|
ODS Blue-line sensors is the price leader in high performance non-contact measuring.
The ODS Blue-line sensors is a very price competitive series of high quality optical laser sensors, especially designed to meet demands from machine builders worldwide. The result is unsurpassed value for money, based on a simple mechanical layout, but at the same time living up to the well known high ODS-standards of measuring accuracy and rugged durability.
The applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to everywhere a non-contact precision measurement is advantageous.
The ODS Blue-line is a good example of DSE’s efforts in customization. In addition to the competitive program of ODS sensors and O2DS scanners, DSE design and manufacture special sensors to customer defined specifications.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
Measuring sensors
Measuring optosensory technology offers an unusual performance spectrum. Depending on the field of application, modern optosensors make use of different measurement principles such as triangulation, phase shift or pulse propagation time to measure distances. Measurement takes place either directly to an object or to a reflector. Leuze electronic also offers positioning systems which determine positions using a barcode tape.
|
|
|
|
|
|
HL-C1 sensors
The laser displacement sensor HL-C1 has reached the highest level in its class. Even when sensing difficult objects such as black rubber or very shiny objects, the sensor has no problems maintaining stable and consistent results. Through the fusion of our unique newly developed optical system, linear image sensor methodology and high-speed sampling technology, a wide variety of objects can now be stably measured with great precision at ultra high speeds. This new sensor is developed for use in almost all fields of industry like tyre manufacturing or semiconductor production (wafers, printed circuit boards).
HL-C1 controller
The compact and multifunctional controller unit HL-C1CM again shows how powerful this new sensor series is. A flexible combination of controller and sensor heads allows cost-effective service and maintenance. Even in production changeovers, i.e. when the distance to be measured changes, only the head has to be exchanged. Another industry first is a compact touch panel that allows you to conveniently make settings and display data. Up to two sensor heads can communicate with one controller. Together with the touch panel, results can be calculated, e.g. for thickness or difference measurement. Moreover, all adjustments and results can be transmitted via RS232 to a normal PC.
|
|
|
|
|
|
If you will measure distances, profiles, form, surface, thickness online fast, non contactless and with a high precision, Eltrotec sensors offers a wide range of laser measure sensors for industrial process measurement.
More than 20 years experience quarantees the knowledge for a lot of different applications customers had to do every day (All the laser beam has protection class 2).
Several sensor types are available to solve specific problems as there are:
a.) shiny or glossy surfaces
b.) black, blank rubber and dark surfaces
c.) surfaces in variation of black and white (colours)
d.) hot metals where you need bigger distances and high temp. sensor.
e.) distance measuring where the machine creates vibration, shock or magnetic fields
range: 5, 10, 20, 50, 100, 200 mm (250 mm is shock protected)
resolution: 0,5 µm - 40 µm
interface: 4-20mA / 1-5VDC
RS232 included
princip: CCD-Chip with integrated signal prozessor
frequency: 1000Hz
(best results with this sensor if there are fast changing interfaces in reflection of surface)
Spot diameter: typ. 100-200 µm depends on distance
|
|
The laser distance-meter LMC-J-0310 is robustly engineered especially for industrial applications. It works at distances up to 3000 m. Up to 300m and more (depending on target reflectivity) no special reflector is needed. Measuring values are provided continuously via the integrated RS422/RS232 or analogue 4..20 mA interfaces. As option, ProfiBus and SSI interface is available. In this way the device is providing position and velocity information during the production process.
The LMC-J-0310 can be used in distance and speed measurement mode. All measuring parameters are adjustable. The high measuring speed allows the distance measurement of extremely fast moving objects.
The operation principle of the LMC-J-0310 is time delay measurement, the measuring time is adjustable between 0,5 and 1000 ms (a special version with 0,1ms is also available). Within a fraction of second one distance measurement is obtained by means of several hundreds or thousands of individual measures.
|
|
|
|
|
|
The LMC-J-0050-x is an opto-electronic distance measuring module for industrial application. The device uses a contact less measurement technique based on comparative phase measurement with amplitude modulation. The laser diode has a divergence of 0.6 mrad for measurement with pinpoint accuracy.
The measurement data is available through different interfaces for further processing. A digital switching output and an analogue output (4..20mA) are also available. The sensor alignment can easily be achieved using the red laser spot.
The sensor is built in a IP 66 housing which is made for heavy industry area. It includes a special dust protection chamber, which keeps the sensor window much longer clean. As ad on, water cooling and air purge nozzles are available. A heat filter is already built in.
- Multi-Bus
- Measuring distances with millimeter accuracy
- Accurate Positioning
- Motion detection / Contour detection
- Level gauging
- Measures surfaces up to 1250 °C
- Width measurement without additional equipment
|
|
| ... products without technical information |
| |
The COMET® sensors from Steinbichler Optotechnik - are designed based on many years of experience and expertise in optical coordinate measurement and on a continuous, customer-oriented further development. Established as the leading digitizing systems, they enjoy widespread use worldwide.
COMET® IV represents the fourth sensor generation: A completely new, technologically revolutionary concept which has crafted the optimum system solution for present and future measuring tasks and which meets all the requirements placed on an industry-compliant measuring system.
COMET® IV offers highest flexibility and modularity paired with an excellent data accuracy. Through the use of cutting edge optical technologies and materials the sensor, which can be used in all branches of industry, sets new standards in 3D digitizing.
|
|
Since more then 10 years, Konica Minolta Sensing offers a range of non-contact 3D Laser Scanners, which enable non-contact 3D measurements of a wide range of products.
Konica Minolta 3D Laser Scanners are transportable, fast and easy to use including many innovative features for rapid prototyping, reverse engineering and quality inspection in a broad field of industrial and non-idustrial applications.
|
|
|
|
|
|
O2DS Scanner measures where others give up - think of hot rolled steel.
The O2DS scanner is an optoelectronic unit for non-contact precision measurement in two dimensions, developed for 2D- / profile-measurement in all kinds of industrial applications.
The O2DS is a laser scanner of the Flying Spot type. The measurement is performed by oscillating the triangulation plane over an angel up to 50°. A fine focused/collimated laser beam is diffusely reflected from the surface of almost any kind of object, and a CCD-camera records the image through an objective.
The measuring frequency is 2 kHz. Different scanning angels can be combined with four different measuring ranges. The smallest range covers 80 to 180 mm and the largest 380 to 1080 mm. The smaller the measuring range is, the higher the resolution will be.
As well as the ODS sensors, the 02DS scanner can be delivered as HT (high temperature) models for measuring on objects with surface temperature up to about 1200°C. Used under such conditions, precautions must be taken to protect the scanner from the heat.
Scanners can furthermore be customized to other than standard scan angels and measuring ranges.
For more detailed information please study the PDF/datasheet on our website www.sensor.dk
|
|
| ... products without technical information |
| |
|
The Microtrak II is a state of the art CMOS laser triangulation sensor for precise measurements of displacement, position, vibration and thickness. It is unaffected by surface texture, color or stray light. Measurement ranges are up to 40 mm at a standoff distance of 120 mm.
|
|
Line through-beam sensors are applied where precise positioning is required or where the dimensions of an object have to be determined with high accuracy (e.g. diameter of a wire). The L-LAS-TB sensors (available in split shape or fork shape) offer various operating widths with a resolution of up to 1024 pixel (4098 subpixel).
An analog output (voltage output or current output) informs about position and size of the object. Furthermore, a digital output is available that offers information about quality and position of the object.
The laser through-beam sensor can be easily parameterised with the Windows® user interface L-LAS-TB-Scope.
|
|
M18-L series
The M18-L series offers all optical functions for a wide range of applications within an M18 housing. A visible laser light spot makes aligning the sensor easy. The M18-L is easy to install and requires very little space thanks to its ultra compact size. You can choose between thru-beam, reflective and retroreflective types.
Characteristics:
Visible red laser diode, laser class 1 (650nm)
Long-range type for up to 60m
Two transistor outputs (light ON / dark ON)
Axial and radial light emission types
M12 connector or cable connection
Metal or plastic housing
Accessories:
Cable
Reflectors
Mounting brackets
|
|
LC-120 series
The LC-120 series is suitable for high precision detection. Choose between versions with background suppression or polarised retroreflective types. This laser class 2 sensor with background suppression allows objects to be detected regardless of colour. The LC-120 features a very small laser spot and short response time with excellent repeatability, making it ideal to detect very small objects or slight movements.
Characteristics:
Trigonometric sensors with 150mm and 350mm rated sensing distance
Excellent price-performance ratio
Retroreflective types with polarising filter (20m)
Diffuse reflective type with background suppression available
Rotary connector available
Accessories:
Cable
Reflectors
Mounting brackets
|
|
|
|
|
|
Parallel laser light with homogeneous light distribution in round or rectangular cross-section is used for measuring, positioning, and detection of objects starting from a size of 0.01 mm.
Measuring principle: Partial covering of the laser beam leads to a voltage at the analog output that is proportional to the degree of covering.
The laser light beam that is emitted by a high-precision optical unit (aspherical surface made of glass) allows the detection of smallest objects (e.g. threads) even in case of a large transmitter/receiver distance (distances up to 100 m, depending on model and aperture). The use of high-precision apertures in the transmitters ensures optimum adaptation to the respective application. The aperture guarantees a homogeneous light distribution on the beam and a sharp beam limitation.
Apart from a large variety of standard apertures special apertures can also be realised.
The non-contacting measurement of fast-moving objects by means of analog laser light barriers of the A-LAS series now is further supported by the new A-LAS-CON1 control unit. Up to two A-LAS sensors can be connected to this control unit. The included A-LAS-CON1-Scope software allows a selection from several evaluation algorithms. Furthermore, an external signal for triggering also can be selected with the operating software, or one of the two analog light barriers functions as a trigger device, while the other laser sensor is used for measurement. This also makes it possible to measure larger objects while they are moving and, among others, allows the performing of measuring tasks such as the width of plug contacts, *gap-size* measurement of stamping parts, etc.
|
|
F NEPTUNE LASER
Spread : 2 to 120 mm
Depth : 42 to 95 mm
Supply : 10 to 30 VDC
Outputs : PNP et NPN independent
High sensitivity
Ultra high-speed detection : 10 kHz
Description :
LASER : modulated red Class I 670 nm
Potentiometric set-up type (green keyboard)
Teach-in set-up type background / object (yellow keyboard)
Keyboard locking
Direct / inverse (L/D)
Independent PNP and NPN outputs
Output indicator
Function indicator
M8 connector
Metal and polyamid/glass housing
Applications:
Detection of marks
Detection on a conveyor
Detection on a vibrating rail
Detection of transparent object
|
|
|
And' Sistem of Linear Calibration Compact for measures of mouvement and calibration of blots tools, CMM or tables XY. The Software allows the operator to collect automatically the data of linear positioning in agreement with the several international Standards comprised ISO, VDI and automatic B5.Compensazione ASTHMA of Temp. Material, Temp. and Pressio_ of Air. Field 15m (opzione50m). Precision 1ìm/m (1ppm)
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
