|
|
The RPS-401A-80P analog ultrasonic sensor manufacturer is mounted in a PVC barrel housing and is completely self contained. It is powered by 20-30 VDC and is reverse polarity protected. It also has a narrow beam angle which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected. The RPS-401A-80P has 2 short circuit protected analog outputs, 4-20mA and 0-10 VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero (P1) and span control (P2). The (P1) manufacturer of potentiometer must be adjusted first. Both analog outputs can be used at the same time.
For set-up purposes an LED strength indicator is provided. This LED is Green when not detecting and changes to a bright Red as a target moves into place depending on how much reflected signal is coming back from the target. The frequency of operation for the RPS-401A-80P is 140kHz. The RPS-401A-80P is constructed of PVC. The barrel measures 30mm x 105mm. A standard 6' cable is provided.
|
|
The RPS-326 is a low frequency, sealed transducer sensor best suited for applications where harsh or hazardous environments are a problem. The transducer head is constructed of 316 grade stainless steel and has a CSA explosion-proof rating. The RPS-326 sensor head CSA rating is Class 1, Division 1, Group ABCD. The ranging and proximity modes provide the versatility of simple detection, or actual distance metering.
The isolated form C relay furnishes N.O. and N.C. outputs, and with the addition of the RPS-500 card various analog outputs are supplied. The RPS-326 sensor, which operates at a frequency of 37kHz, has a narrow sensing beam. Sensing ranges available for the RPS-326 include 24" to 72", and 24" to 240". Mounting flanges, Led indicator, ranging manufacturer of potentiometer and 30ft. transducer cable are included. Optional cable lengths are available.
|
|
The RPS-400-6 is a compact, high frequency sensor. It was introduced to the Migatron family of manufacturer of ultrasonic sensors to better meet the needs of the machine manufacturing industry.
This sensor has a wide array of application solutions not found in other proximity sensor manufacturers technologies. The RPS-400-6 has an adjustable two to six inch sensing range with background suppression (meaning any object within the desired range is detected, while objects out of the desired range are ignored).
It cannot be affected by changes in target color or material. The RPS-400-6 is capable of detecting vibrating and/or tilting targets. A response time of no more than 2.1 ms and an operating frequency of 300 kHz makes the RPS-400-6 a repeatable and accurate high velocity sensor.
The RPS-400-6 is a three wire NPN transistor output device. The transistor can switch 30VDC at 50 mA continuously. A six-foot cable comes standard with the RPS-400-6. Special cable lengths or professional connectors are also available for OEM applications.
.
|
|
The RPS-412A is a high accuracy analog ultrasonic sensor (+/- 0.002" or 0.05% of range, whichever is greater, at 25 degree C). The sensor has a built in temperature compensation target, that professional monitors and compensates for air temperature 50 times per second. The sensor also compensates for changes in relative humidity, changes in barometric pressure, and other factors that influence the speed of sound.
The RPS-412A has a 47mm stainless steel barrel housing. The stainless steel housing is electrically isolated from the sensor electronics.
The RPS-412A has a 0-10V analog output. Two measuring ranges are available: 3-10" and 3-16". |
|
The RPS-409A-IS is an intrinsically safe, UL Listed analog ultrasonic sensor manufacturers. It is a self-contained sensor in a 30mm PVC barrel housing. It is powered by 16-30VDC with reverse polarity protection. It also has a narrow beam angle, which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected.
The RPS-409A-IS has a short circuit protected analog 0-10VDC output. Example using the RPS-409A-80-IS: The output is a linear .125 volts per inch.
The RPS-409A-IS has built in temperature compensation to provide accurate readings throughout the entire operating temperature range.
An Led screen is provided. The LED is green when not detecting and changes to red when a target moves into place. The sensor is completely sealed and the connection is made by way of IP and NEMA rated cables.
There are four sensing ranges available: 4-40", 6-80", 10-144", and 12-216".
The RPS-409A-IS is designed to take advantage of today's PLC and computer analog input cards. The numerical values that are programmed into the PLC or computer will determine the zero and span.
|
|
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may effect the detection. Objects consisting of a variety of materials can be detected regardless of colour or shape to within millimetres.
The sensor uses very high frequencies that are outside of the human’s audible range, as a data carrier. The time it takes the ultrasonic wave to pass between the sensor and the object is the value for the distance or the position. Ultrasonic sensors have proven their reliability and precision especially in the wood and furniture industry, the construction materials industry, farming equipment, construction equipment and in level control applications.
Pepperl+Fuchs’ ultrasonic sensors currently encompass 8 series of mechanical designs for through-beam, direct detection and reflex operation with more than 40 designs and models. Customer and application specific custom solutions underscore our technological competence in this area of sensors.
|
|
The RPS-150A analog ultrasonic sensor is mounted in a limit switch housing and is completely self contained. It is powered by 20-30VDC and is reverse polarity protected. It also has a wide beam angle which enables it to detect a target that is not at right angles. A flat target can tilt up to 35 degrees and still be detected. The RPS-150A has 2 short circuit protected analog outputs, 4-20mA and 0-10VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero & span control. For set-up purposes an LED strength indicator is provided.
This LED is green when not detecting and fades to RED as a target moves into place, depending on how much reflected signal is coming back from the target. The frequency of operation is 38.5kHz. There are two ranges available in this model 2" to 40" or 5" to 80". It also features a quick disconnect receptacle. The housing is constructed of plastic valox and has standard 30mm X 60mm limit switch mounting dimensions as well as side holes for mounting the sensor on its side.
|
|
The great advantage of ultrasonic sensors is their independency of the surfaces' characteristics. Ultrasonic sensors from Pulsotronic work with an ultrasonic transducer for sending and receiving sound waves.
We provide a broad range of ultrasonic sensors, appropriate for applications in various fields. One- and two-piece, analog and programmable proximity sensors manufacturers as well as ultrasonic barriers. Our sensors ensure high resolution, optimum precision, little minimum distances and long range. They are conform to IP67.
Ultrasonic sensors
Available sensing ranges 25 - 8000mm
Available carrier frequency 65 - 400KHz
Response time 10ms - 600ms
Repeat accuracy digital max ± 0,4% / ± 0,2mm
Analog and digital outputs available
Adjustment: via potentiometer suppliers, teach-in or programmable
Operating temperature -15°C ... +70°C |
|
The great advantage of ultrasonic sensors is their independency of the surfaces' characteristics. Ultrasonic sensors from Pulsotronic work with an manufacturer of ultrasonic transducer for sending and receiving sound waves.
We provide a broad range of ultrasonic sensors, appropriate for applications in various fields. One- and two-piece, analog and programmable proximity sensors suppliers as well as ultrasonic barriers. Our sensors ensure high resolution, optimum precision, little minimum distances and long range. They are conform to IP67.
KURT250:
Sensing range 25 - 250mm
Response time 10msec
Digital switch point adjustment via Teach-In
Output voltage: characteristic line teachable (0 ... 10V)
Operating temperature -15°C ... +70°C
repeat accuracy ± 0,2mm / ± 0,2%
Carrier frequency 400KHz
|
|
Ultrasonic manufacturer of proximity switches are used wherever distances have to be measured in air. The targets to be detected can be in the solid, liquid, granular or powder state. The material may be transparent, or colored and of any shape, as well as having a polished or matt surface.
Contrinex ultrasonic proximity switches are available as diffuse and reflex sensors. The delivery program comprises M18 short devices adjustable with teach-in, as well as compact switches in sizes M18 and M30, programmable by means of a potentiometer and/or interface. The M18 compact devices are available with either switching or analog outputs. In addition, versions of the M30 execution are available with either one or two switching outputs, or with analog and switching outputs in the same device. Contrinex ultrasonic proximity switches are notable for their high excess gain as well as a small blind zone, and can achieve operating distances of up to 6000 mm. For optimum adjustment to the application conditions, the compact switch parameters can be programmed, visualized, checked and modified by means of a PC interface device and the accompanying CONPROG professional software. |
|
Sonar Proximity switches manufacturers SIMATIC PXS
From 3 cm to 10 m - They Hear Everything!
Our sonar proximity switches sense objects of varying materials, shapes, colors or consistencies with absolute precision, flexibility and reliability. The application potential is almost unlimited. Whether recording fill levels or heights, measuring distances or counting bottles, our switches recognize objects with a wide range of properties from a distance of 3 cm to 10 m, regardless whether they are liquid, solid, powdery or even transparent. Surface conditions are irrelevant as well - they can be rough or smooth, clean or dirty, wet or dry. Our proximity switches feature maximum ruggedness and resistance against dirt, vibration and extraneous light or sound.
|
|
| Ultrasonic sensors use ultrasonic waves for non-contact and wear-free detection of a large variety of objects. It does not matter whether the object is transparent or opaque, metallic or non-metallic, or of liquid, solid or powdery consistence. Environmental conditions such as professional spray, dust or rain hardly affect their function. |
|
The RPS-322 (model shown) has 2 sealed stainless steel multiplexed transducers, independent range control adjustments, Led monitors, and form C relay outputs.
The transducer head is constructed of 303 grade stainless steel with a 302 grade stainless steel sensing face, and is best suited for environments where dirt and moisture are a problem, as well as some chemical environments. This sensor also has a unique master and slave feature which enables many of the same units to be used within close proximity of one another without cross-talk interference. For example, if three sensors are needed in a close area, one sensor would be left as a master and the other two would be slaves.
The remote transducers allow for mounting of the sensor heads in cramped spaces while the controller is out of the way. The (2) independent and isolated form C relays furnish N.O. and N.C. outputs. This sensor operates at a frequency of 150kHz for the 72" range. This sensor has a narrow sensing beam. Mounting flanges, LED indicators, ranging potentiometers, and 6-ft. transducer cables are included. Optional cable lengths are available.
|
|
| The RPS-40-5 is a compact, high frequency sensor. It was introduced to the Migatron family of ultrasonic sensors to better meet the needs of the machine manufacturing industry. This sensor has a wide array of application solutions not found in other proximity sensor manufacturers technologies. The RPS-40-5 has a fixed 0.5-5" sensing range with background suppression (meaning any object with the range is detected, while objects out of the range are ignored). It cannot be affected by changes in target color or material. |
|
| Honeywell Sensing and Control ultrasonic distance sensors solve tough position sensing problems, detecting targets made of practically any material. They work in dry, dusty environments. Particularly useful where other sensing technologies have difficulty, such as: clear or shiny objects, foggy or particle laden air, splashing liquids, etc. Also where larger sensors or longer sensing distances are required. |
|
In the area of modern industrial sensors, Mayser offers you a tailor-made, intelligent solution: the efficient ultrasonic sensor USIE with extremely flat noise characteristics, which has a blind zone of just one centimetre and an operating range of 200 centimetres.
The new sensor series is based on an ultrasonic industrial converter with excellent adaptation to the medium of air. Interaction with a high gain analogue electronic system results in unique reception sensitivity, enabling scanning of small objects at great distances. For example, a wire with a diameter of one millimetre can be reliably detected at a distance of 1000 millimetres.
|
|
| Ultrasonic proximity detectors with automated switch from current to voltage output and increasing/decreasing output. |
|
Features:
Narrow, 7° sonic beam
High resolution 500 KHz ultrasonic frequency
Fast response - as fast as 1.5 ms industrial sampling rate
Self-contained, 18mm barrel or flat-profile housing styles
Field programmable capability in 18 mm and flat-profile models
DeviceNet capability available in flat-profile models
CE Certified |
|
Features:
Self contained
Meets NEMA 4X/IP67 standards
Survives harsh environments
No sensitivity adjustments
Sensing ranges up to 1829 mm (72") |
|
Features:
Self-contained, 12 mm, threaded barrel, or flat-profile housing styles
Extended sensing range of 102 mm (4.0")
Field Programmable capability
All-material, proximity sensing capability
CE Certified |
|
Features:
Sensing ranges of 1m (39"), 2m (79") and 8m (26')
Reliable detection with simple On/Off control of the output
Easy pushbutton setup or optional hand-held setup/display accessory available for all
Self-contained, 30 mm barrel, in either ULTEM® plastic or SS303 stainless steel housing
Resistant to caustic materials and harsh environments
Field programmable capability
DeviceNet capability
CE Certified |
|
Detection, the measurement and the removal of not easily detectable objects are carried out in a sure and reliable way by means of our detectors with ultrasounds until a distance of 3 meters with a high and constant resolution, in digital and analogical mode. They tolerate clogging, dust and moisture. They are especially ready to detect transparent, solid objects and in the form of granules. The electronic device Teach-in you makes it possible to adjust your detectors in a correct way in a dexterity. The solution when the other techniques do not give satisfaction.
- Recognizes also difficult surfaces
- High-resolution
- Fine Beam with ultrasounds
- Small cases
|
|
Range being composed of 5 series of detection
Measurement brackets of 10-100mm with 150-4000mm
Sonic angles of 5° with 50°
Threshold detection on exit PNP or NPN
Analogical exits 4-20 my or 0-10 increasing or decreasing VDC
Robust or metal PVC cases, diameter M 30
Classify protection IP 65 to IP 68 |
|
| ... products without technical information |
| |
|
|
