Pt100 temperature sensors

Temperature: -50 °C - 105 °C

Pt100 4-wire temperature probe, Temperature range -50 °C..+105 °C, DIN A, plastic material, cable length 5m Characteristics • Product type: Probe • Probe type: ...

Temperature: -70 °C - 260 °C

Pt100 4-wire temperature probe, Temperature range -90 °C..+260 °C, DIN A: -70 °C..+260 °C, cable length 4m Characteristics • Product type: Probe • Probe type: ...

Temperature: -200 °C - 500 °C

Pt100 4-wire ML-temperature probe, Ø 3 L= 350 mm, Temperature range -200 °C..+500 °C, class A -30 °C..+300 °C otherwise class B, bendable, silicon cable L=5m, without ...

Temperature: 70, 60, 80, 50 °C

... the temperature is too high. Besides the possibility of a thermostat, probe temperature can be combined with the PT100 / PT1000 have a signal for ...

Temperature: -30 °C - 150 °C

This sensor using platinum resistance thermometer for the detecting element is a sensor for gas temperature measurement. Its compact, light-weight, and fast response ...

Temperature: 0 °C - 160 °C
Probe diameter: 9 mm

Duct temperature sensor Measuring impedance Pt100 according to DIN EN 60751 Available as duct, room, outdoor and contact sensors Resistance thermometer ...

Temperature: -30 °C - 60 °C
Probe diameter: 9 mm

Outdoor temperature sensor • Measuring resistor Pt100 according to DIN EN 60751 • Sun protection and mounting clips for wall mounting Application area Resistance thermometer ...

Temperature: 0 °C - 50 °C
Probe diameter: 9 mm

Room temperature sensor Measuring impedance Pt100 according to DIN EN 60751 Room temperature sensor RF1 for dry rooms, wall mounting, ...

Temperature: -100 °C - 250 °C
Process pressure: 3 bar

Pt100 temperature sensors for special applications • Pt100 temperature probe for use in laboratory, • ...

Temperature: -50 °C - 400 °C
Response time: 5 s

Digital precision resistance sensor •Digital precision resistance sensor Pt100 up to 400 °C •Resolution of 0.001 K as reference sensor •With ALMEMO® ...

Temperature: -40 °C - 400 °C

... sheet Accuracy: Pt100 film resistor, class B* Measuring tip: Operative range -40...+400 °C Sheath element, stainless steel T90: * 8 s Handle: * 127 mm Cable: 1.5 m FEP/silicone L = 100 ...

... are temperature probes. They have PT100 and thermocouple J probes. The lengths of the units are based on needed specifications. They are designed with a Teflon® FEP sheath. The probes ...

Temperature: 100, 200, 90 °C

The PT 100 4 wires are available with 1/2/3 PTI100 sensors. It is available with flexible or rigid tubes on basis of various materials produced. The precise measurement ...

Temperature: -70 °C - 500 °C

... application -100°C up to 300 °C • Accuracy Class A within range -30°C… 300°C • Uncertainty Class A: U = ± (0.15 + 0.0021 *|T|) Rotronic offers a wide range of its own PT100 probes, ...

Temperature: -70 °C - 500 °C

Insertion probe with handle with 1 m cable • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature ...

Temperature: -70 °C - 500 °C

Cable probe 200 x 6 mm, not waterproof • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature change ...

Temperature: -200 °C - 1,600 °C

TH Temperature Sensors It is used by many factory because of its simple and convenient temperature measurement.

Temperature: -70 °C - 250 °C
Probe diameter: 10, 6, 8 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: ...

Temperature: -70 °C - 250 °C
Probe diameter: 6, 8, 10 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: ...

Temperature: -70 °C - 250 °C
Probe diameter: 6, 8, 10 mm

Temperature probe PT100 (RTD) with head with electric connection and stem in stainless steel AISI 316. It is normally installed in pipes or tanks. Applications: ...

Temperature: -60 °C - 200 °C

... soldering, welding and crimping. The nickel temperature sensors are vibration and temperature shock resistant with simple interchangeability and small dimensions. Furthermore, the ...

Temperature: -200 °C - 600 °C

The IST AG PW RTD sensor has been developed as an alternative to the traditional wire-wound sensors. The PW sensor combines the advantages of high accuracy and precision of the wire-wound ...

Temperature: -200 °C - 200 °C

... supplier providing ESCC qualified Pt temperature sensors. The RTDs are available with different resistances ranging from Pt100 to Pt2000. ...

Temperature: -40 °C - 1,700 °C

... and high voltage equipment. These sensors are made of platinum (Pt) and have a resistance value of 100 ohms at 0°C. There is also the Pt1000 sensor, ...

Temperature: -30 °C - 110 °C

... directly into a bearing housing. The sensors are equipped with grease zerk to lubricate the bearing without removing the sensor. he ADB series have NTC or PT100 type ...

Temperature: 80, 60, 70, 90, 50 °C

... NTC thermistor or Pt100 RTD type for continuous temperature monitoring, and a PTC thermistor model with the following trip points (specify when ordering): 60°C, 70°C, 80°C, 90°C for step ...

Temperature: 50 °C - 90 °C

... thermistor or platinum RTD (PT100) type for continuous temperature monitoring. It is designed to bolt directly onto a bearing housing, motor, gearbox, or machine casing. ...

Temperature: 0 °C - 80 °C
Probe diameter: 22 mm

Temperature Sensor (FL-TF 80 S/M) For usage in mixers, aggregate silos and cement weighing systems Usage and applications In the concrete and precast industry. For all common mixer types, aggregate ...

Temperature: -50 °C - 500 °C
Probe diameter: 4.5, 2, 3, 6 mm

Mineral insulated (MI) sub-assembly PT100 resistance thermometers provide a quick and low cost effective way for sensor manufacturers to produce complete assemblies. • The sensor ...

Temperature: -50 °C - 150 °C

Silicone rubber patch with self adhesive foil backing Pt100 class B, 4 wire sensor Dimensions L40 x W15 Good resistance to oils & chemicals Temperature range -50 ...

Temperature: -50 °C - 200 °C

Pt100 element to IEC 751 Class B 4 wire configuration Temperature range -50°C to + 200°C Pt100 element in a 3.0mm diameter 316 stainless steel probe 1 ...

Temperature: -50 °C - 250 °C

Pt100 thin film element housed in ceramic sheath Ceramic 5mm dia x 35mm long Class B, 2 wire 50mm or 4 wire 450mm available PTFE insulated wires, 7/0.2mm SPC Temperature range -50°C to 250°C

Temperature: -50 °C - 250 °C
Process pressure: 2, 5 bar

... transition piece has multiple oil barriers to ensure that the sensor is leak proof. Combining the sensor with the optional sealing gland makes the sensor fully oil-tight. Different ...

Temperature: -30 °C - 150 °C

The STD duct temperature sensor measures the duct temperature from -30 up to +150°C of air and liquid media.The range is available with all type of current sensor elements.

Temperature: -30 °C - 90 °C

The STS screw-in temperature sensor measures the temperature from -30 up to +90°C at a max. pressure of 16 bar of air and liquid media

Temperature: -30 °C - 60 °C

The STR temperature sensor are designed in a modern housing measures the temperature from -30 up to +60°C . The range is available with all type of current sensor elements ...

Temperature: -50 °C - 150 °C

The Steriprobe® range of autoclave load temperature probes is manufactured in the UK by Thermal Detection and is specified by steriliser manufacturers and end users across the world. ...

Temperature: -50 °C - 150 °C

The SL150 is an autoclave load temperature probe designed for use in pharmaceutical steam autoclaves. For measuring the temperature of either the inside of the autoclave or steriliser ...

Temperature: -50 °C - 150 °C

The SL160 is an autoclave load temperature probe designed for monitoring the temperature of liquid loads contained in bottles or similar containers. The SL160 has a 90° bend in the ...

Temperature: -30 °C - 90 °C
Probe diameter: 5, 6 mm

PT 100 ohm at 0°C class B sensing element, inside a 316L stainless steel sheath, with sealed end and 3 wire PVC insulated cable with connection thimbles, with or without shielding. Temperature ...

Temperature: -60 °C - 200 °C
Probe diameter: 6 mm

PT 100 ohm at 0°C dass B sensing element, inside a AISI316L/ Din 1.4404 stainless steel sheath, with sealed end and 3 wires FEP insulated cable with connection thimbles and shielding. Temperature ...

Temperature: -50 °C - 500 °C
Probe diameter: 4.5 mm

PT100 ohm at 0°C class B sensing element, Inside a 316L flexible stainless steel sheath, with sealed end and 3 wires PVC insulated cable with connection thimbles and shielding. A coiled spring protects ...

Temperature: -100 °C - 270 °C

... development with Indycar teams, Texys is proud to release its new brake caliper temperature sensor kit suitable for Brembo and AP Racing. The brake caliper temperature sensor ...

Temperature: -100 °C - 270 °C

The Texense PT-100-M4 brake caliper temperature sensing element is a 100 ohm RTD built in a M4 housing with a cable output at 90° to allow ease of installation. The M4 ...

... M8 and 1/8 NPT. This PT sensor measures the resistance of the platinum element. - Resistance of 100 ohms at 0°C and 138.5 ohms at 100°C. - Resistance ...

Temperature: -200 °C - 800 °C

Type: Pt 100, 200, 500, 1000 cu-50, 53 etc. Connection: 2, 3, 4 wire Element Dia: 1.5, 3, 4.5, 6, 8 mm Configuration: Simplex/Duplex/Others