|
|
Combine The Positive Timing Action of Gears With the Flexibility, Speed and Low Noise Level of Belts
The Browning HPT® Synchronous Belt Drive line offers a wide range of HP and speeds, from very low speeds - 10 RPM or less - to speed well over 5,000 RPM, with horsepower ratings from fractional to more than 200 HP.
Belt Drive Features and Benefits include:
Significantly Quieter Operation
New Parabolic Tooth Profile
Glass Fiber Cord Tension Member
Neoprene Rubber Body
Nylon Facing Fabric
Positive Drive, No Slip
Lower Belt Tensions
No Lubrication Required
Fully Interchangeable With Competitive Types
|
|
Synchronous components ensure an engaged drive that does not slip. Compared with chain drives, the speed range is more than twice as high while retaining high belt efficiency.
Synchronous belts are most suitable for areas when proper maintenance is difficult or where downtime could prove to be extremely expensive.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
Poly-V® & Micro-V® Multi-Ribbed Pulleys:
- Precise Power Per Rib - power can range from a few hundredths of a horsepower up to 1.7 hp per rib
- More ribs mean more power
- Pulley size puts precision in the power
- Drives with 4, 6 or 10 ribs - popular industry standards
- Several belts can ride on a single custom sized pulley
- New belt designs improve performance on partial turns - as small as 1/4 or 1/8 rotation
- Made in USA
Poly-V® & Micro-V® Multi-Ribbed Pulley Applications:
Applications exist for nylon pulleys, including high-speed machine tools, polishers, fans, dryers, pumps, mixers, dispensers, atomizers, compressors, microwave ovens, office equipment, display components, chair lifts and more.
|
|
Adjustable Light Duty (HVAC)
MVL Series
- Designed for up to 5 HP
- Pitch diameter easily changed
- Bore range 1/2" to 1-3/8"
- Bulk packaged 20 per carton
|
|
OLEOSTATIC: Z - A - B - C - D - E - 20 - 25 - 45 - 50
SP: SPZ - SPA - SPB - SPC - 19
KOMPATTEX: 3V - 5V - 8V
ESAFLEX: AA - BB - CC
XDV: XDV38 - XDV48 - XDV58
LINEA X: XPZ - XPA - XPB - XPC
GOLD LABEL COG BELT: AX - BX - CX
KOMPATTEX COG-BELT: 3VX - 5VX - 8VX
VARISECT: 17x5 - 21x6,5 - 26x8 - 33x10
42x13 - 52x16 - 65x20 - 13x6 - 22x8 - 28x8
30x10 - 36x12 - 37x10 - 47x13 - 55x16 - 70x20
PLURIBAND: B - C - 3V - 5V - 8V - 3VX - 5VX
|
|
optibelt KS V-grooved pulleys for
taper bushes
optibelt KS V-grooved pulleys for
cylindrical bore
optibelt RE Variable speed pulleys
|
|
- Classical QD
High-quality cast iron heavy duty pulleys
for classical (A, B, C, D) V-Belts.
Standardized QD bushings
- Power-Wedge QD
High-capacity cast iron pulleys
for use with narrow (3V, 5V, 8V)
V-Belts. Standardized QD
bushings.
QD is a registered trademark - Emerson Electric o Neoprene is a registered trademark - DuPont Dow Corp.
- QD Bushings
Standardized for interchangeability.
Tapered and fully split through
bore length for equivalent of
interference fit.
|
|
Available in all pitches, standard and customized.
A wide range of materials and special treatments.
We can deal with orders of any size, from large to small ones.
VISION-TECH pulleys are supplied together with our cog belts
to guarantee the accuracy demanded by customers and the quality
that has always distinguished VISION-TECH products.
All pulleys are marked on the side with the VISION-TECH logo.
|
|
Timing Belt Pulleys are available in the following types:
- XL 1/5" pitch
- L 3/8" pitch
- HTD 3mm, 5mm, 8mm pitch
- Custom Design Pulleys
- Molded high strength, glass reinforced nylon
- All nylon or with aluminum hubs
- Strong, accurate, lightweight, quiet running
- Single or double flange
- Set screw(s) and keyway(s)
|
|
Timing belt pulleys and V-belt pulleys
Walther Flender Antriebstechnik GmbH is one of Germany major suppliers of timing belt pulleys and V-belt pulleys. We have a wide variety of belts and standard pulleys in stock.
Toothed belt and V-groove pulleys are manufactured by Walther Flender based on customer drawings and, if necessary, are processed with special surface treatments, balancing or grinding, according to your requirements.
WF timing belt and V-belt pulleys are available in various aluminium alloys and synthetic materials. We also offer pulleys made of steel and grey cast iron.
In coordination with our product managers, specially adapted hub cutters are used to reduce the stress on the timing belt and to optimised positioning accuracy.
|
|
|
The capped tube pulley design is used in applications with pulley face widths in excess of 6 inches. Two end caps are welded to tube stock of proper diameter, surface finish, and hardness. They are usually fixed to a shaft via QD bushings attached to the end caps via a bolt hole diameter.
|
|
|
Belt Technologies patented Independently Steerable Pulley, or ISP, has been designed for an effective method of compensating for camber, which is inherent in the metal strip used to manufacture metal belts. Using either of two methods, the rotated shaft method, or rotated collar method, the steering collar of the ISP is easily actuated to provide movement left or right across the face of the pulley. This removes the need for pillow blocks, jack screws, or other alignment methods. The system can be adjusted while in motion as well.
|
|
Timing pulleys are used when a system needs to deliver precise positioning accuracy or repeatability. Timing elements help to control belt creep in a typical belt system.
Belt Technologies, Inc. features two types of timing pulleys.
Type I Timing features a timing element which protrudes from the surface of the pulley, and engages in a belt perforation.
Type II Timing incorporates a timing pocket into the pulley, which engages with a physical component on the inner circumference of the metal belt.
Design Considerations for timing pulleys include material type, tape support diameter, and pulley type.
|
|
| ... products without technical information |
| |
... see all the products in the category
Pulleys
|
|
|
see the results for the following category : 
