|
|
Combine The Positive Timing Action of Gears With the Flexibility, Speed and Low Noise Level of Belts
The Browning HPT® Synchronous Belt Drive line offers a wide range of HP and speeds, from very low speeds - 10 RPM or less - to speed well over 5,000 RPM, with horsepower ratings from fractional to more than 200 HP.
Belt Drive Features and Benefits include:
Significantly Quieter Operation
New Parabolic Tooth Profile
Glass Fiber Cord Tension Member
Neoprene Rubber Body
Nylon Facing Fabric
Positive Drive, No Slip
Lower Belt Tensions
No Lubrication Required
Fully Interchangeable With Competitive Types
|
|
Synchronous components ensure an engaged drive that does not slip. Compared with chain drives, the speed range is more than twice as high while retaining high belt efficiency.
Synchronous belts are most suitable for areas when proper maintenance is difficult or where downtime could prove to be extremely expensive.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
| ... products without technical information |
| |
... see all the products in the category
Pulleys
|
MODEL SERIES - GEARED MOTORISED POTENTIOMETERS
DC MOTORS WITH POT ASSEMBLY
Design -
Mech-Tex offer various assemblies in which a potentiometer with different gear ratios can be mounted in series of the gear train. Thus the geared DC motor operation can be convert in to a close loop one. Suitable mounting arrangement to mount the potentiometer on the gearhead is provided. Use of suitable reduction gear ratios can make the potentiometer rotate more or less (as per requirement) number of rotations with respect to the output shaft. Thus the reading provided by the potentiometer can be more accurate.
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
|
|
|
|
FAULHABER BX4 Series 2232 - Brushless DC Servomotors
New developed compact- design
Reliable and long-lived
With the introduction of the BX4 series of brushless DC servomotors, FAULHABER once again underscores its position as an innovative market leader in highly integrated miniature drive systems. Using the latest production methods, some specially developed by FAULHABER, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints. Despite the compact dimensions, the new four-pole concept of the series ensures a high continuous torque of up to 12 mNm, with a flat gradient of the n/M characteristic curve.
Notable features are the smooth running characteristics and the particularly low noise level. Thanks to its electronic commutation, the brushless servo motor series is characterised by a much longer service life than mechanically commutated drives. Whilst in the basic version the commutation is provided by an external control, the flexible motor concept of the BX4 series also offers versions with integrated speed controller or integrated encoder. The encoder version is available in four different preset resolutions: 32, 64, 128, or 256 quadrature impulses per revolution. It is available with an optional line driver and differential output signal. In addition to mechanical speed adjustment, the new planetary gearheads of the 22F series also allow a temporary torque increase up to 1500 mNm. Designed with one to four stages, the precision gearhead in steel 21 offers finely graduated reduction ratios, and the diameters can be combined in conformity with the BX4 drives.
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery.
|
|
DC-Motors Series 5/6/7
True values last forever! The same applies to DC motors from Siemens. Even if it has been forecast long ago that the end is nigh for them, we shall retain this technology. After all, in daily use the DC motors have for decades proved their worth; it is therefore not necessary to consider an alternative.
Together with the SIMOREG DC-MASTER drive converter units they form the ideal drive set wherever competitive prices and high availability are required.
|
|
|
Compact drives consist of flywheel, planetary gear and clutch brake combination (pneumatically/hydraulically) and by our experienced engineers with the specific requirements of your press are co-ordinated. Address us.
|
|
Intelligence and high power density in a tiny space
maxon's compact drives feature controllers, sensors and motors in a modern aluminium casing, which, when combined with existing compatible maxon products, produce robust, space-saving and high power density drive solutions. The new MCD EPOS is a highly dynamic, maintenance-free positioning drive with a fieldbus connection and a maximum 60 watt output.
maxon's compact drives are ideal, in that they take up very little space yet provide excellent functionality. They are also extremely flexible and can be used, for example, in automation, robotics or even for laboratory applications. The MCD EPOS combines a brushless maxon EC motor, a digital encoder MR and a fully digital EPOS positioning controller. Cost-savings have been made thanks to the careful optimisation of components, creating an unrivalled and competitively priced drive that works out slightly cheaper than the price of the individual parts.
|
|
Series M21R 80T to 132T
M21R 132 to 180 VS
Output range 0.55 to 7.5 kW (M21... T)
7.5 to 22 kW (M21... VS)
Frequency setting range 0 to 132 Hz (M21... T)
0 to 100 Hz (M21... VS)
Features Modular design, VS: vector-controlled,
sensorless, superior operating standard, DC link reactors, PID controller, temperature monitoring, simple start-up, degree of protection IP 54/55 and higher, class F insulation, energy-efficient and environment-friendly, series are compliant with standards EN 61800-3, VDE 0160, EN 50081, EN 50082
|
|
| ... products without technical information |
| |
|
... see all the products in the category
Clutches
|
Combine The Positive Timing Action of Gears With the Flexibility, Speed and Low Noise Level of Belts
The Browning HPT® Synchronous Belt Drive line offers a wide range of HP and speeds, from very low speeds - 10 RPM or less - to speed well over 5,000 RPM, with horsepower ratings from fractional to more than 200 HP.
Belt Drive Features and Benefits include:
Significantly Quieter Operation
New Parabolic Tooth Profile
Glass Fiber Cord Tension Member
Neoprene Rubber Body
Nylon Facing Fabric
Positive Drive, No Slip
Lower Belt Tensions
No Lubrication Required
Fully Interchangeable With Competitive Types
|
|
Synchronous components ensure an engaged drive that does not slip. Compared with chain drives, the speed range is more than twice as high while retaining high belt efficiency.
Synchronous belts are most suitable for areas when proper maintenance is difficult or where downtime could prove to be extremely expensive.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
AC induction hoist and traction motors offer higher efficiency and smaller size than DC sepex or series wound motors with the same output and thermal performance.
They are without commutator and brushes and require no maintenance. With this type of motor, acceleration and braking torque at higher speeds are not limited by the commutator, which results in shorter stopping distances without the use of a mechanical brake. They also offer longer battery life and more precise control.
Main features of Iskra AC Induction motors:
* High efficiency.
* High specific power.
* Small size.
* Low noise operation.
* Long life without maintenance.
* Precise control.
|
|
| ... products without technical information |
| |
|
|
|
|
AGIMAG - Magnetically driven agitation - for ultimate leak tightness
Designed to be cleaned and sterilized (in place or in autoclave) and build with FDA components, the AGIMAG® agitators from MIXEL are optimized for all the pharmaceutical, cosmetics and food processing.
INDUSTRIES CONCERNED
Pharmaceuticals, food processing,
light chemicals, cosmetics
APPLICATIONS
* storage
* mixing low viscosity products
* fermentation
PERFORMANCE
From 10 litres to 10,000 litres (enquire for higher
capacities)
High pressure (up to 16 bar)
Up to 150°C
FDA approved MATERIALS
316 L stainless steel polished to Ra < 0.2µm electrolytic
polishing
Bearing blocks made from silicon carbide with no free
silica (other configurations please enquire)
POWER
0.18 to 2.2kW
Transmission by magnetic coupling
MAJOR INNOVATIONS
- tachometer built into agitation head (cleanness,
control, safety by instant stopping of drive)
- clutch device for the magnetic coupling
(maintenance operations made easier)
- compliant with EHEDG cleanability criteria.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
