|
|
Combine The Positive Timing Action of Gears With the Flexibility, Speed and Low Noise Level of Belts
The Browning HPT® Synchronous Belt Drive line offers a wide range of HP and speeds, from very low speeds - 10 RPM or less - to speed well over 5,000 RPM, with horsepower ratings from fractional to more than 200 HP.
Belt Drive Features and Benefits include:
Significantly Quieter Operation
New Parabolic Tooth Profile
Glass Fiber Cord Tension Member
Neoprene Rubber Body
Nylon Facing Fabric
Positive Drive, No Slip
Lower Belt Tensions
No Lubrication Required
Fully Interchangeable With Competitive Types
|
|
Synchronous components ensure an engaged drive that does not slip. Compared with chain drives, the speed range is more than twice as high while retaining high belt efficiency.
Synchronous belts are most suitable for areas when proper maintenance is difficult or where downtime could prove to be extremely expensive.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
| ... products without technical information |
| |
... see all the products in the category
Pulleys
|
Intelligence and high power density in a tiny space
maxon's compact drives feature controllers, sensors and motors in a modern aluminium casing, which, when combined with existing compatible maxon products, produce robust, space-saving and high power density drive solutions. The new MCD EPOS is a highly dynamic, maintenance-free positioning drive with a fieldbus connection and a maximum 60 watt output.
maxon's compact drives are ideal, in that they take up very little space yet provide excellent functionality. They are also extremely flexible and can be used, for example, in automation, robotics or even for laboratory applications. The MCD EPOS combines a brushless maxon EC motor, a digital encoder MR and a fully digital EPOS positioning controller. Cost-savings have been made thanks to the careful optimisation of components, creating an unrivalled and competitively priced drive that works out slightly cheaper than the price of the individual parts.
|
|
|
Compact drives consist of flywheel, planetary gear and clutch brake combination (pneumatically/hydraulically) and by our experienced engineers with the specific requirements of your press are co-ordinated. Address us.
|
|
Series M21R 80T to 132T
M21R 132 to 180 VS
Output range 0.55 to 7.5 kW (M21... T)
7.5 to 22 kW (M21... VS)
Frequency setting range 0 to 132 Hz (M21... T)
0 to 100 Hz (M21... VS)
Features Modular design, VS: vector-controlled,
sensorless, superior operating standard, DC link reactors, PID controller, temperature monitoring, simple start-up, degree of protection IP 54/55 and higher, class F insulation, energy-efficient and environment-friendly, series are compliant with standards EN 61800-3, VDE 0160, EN 50081, EN 50082
|
|
| ... products without technical information |
| |
|
... see all the products in the category
Clutches
|
|
The Blancett Frequency-to-Current (F-to-I) and Frequency-to-Voltage (F-to-V) converters are microprocessor-based devices designed to provide an analog output directly from a Blancett turbine flow meter. The converters measure and calculate the flow rate of a turbine flow meter and produce an analog output representative of that flow rate, in the form of a 4-20 mA or 0-5 VDC signal.
|
|
|
The LTF sensor performs the functions of light sensing, signal conditioning, and A/D conversion in a single monolithic IC. The LTF device converts light intensity to a digital format for a direct interface to a microcontroller. The output of this device is a square wave or pulse train whose frequency is linearly proportional to light intensity and features a dynamic range of 120dB.
|
|
|
|
|
|
The TSL237 light-to-frequency converter combines a silicon photodiode and a current-to-frequency converter on a single monolithic CMOS integrated circuit. The output is a square wave (50% duty cycle) with frequency directly proportional to light intensity. Because it is TTL compatible, the output allows direct interface to a microcontroller or other logic circuitry. The TSL237 has been temperature compensated for the ultraviolet-to-visible range of 320 nm to 700 nm and responds over the light range of 320 nm to 1050 nm. The device is characterized for operation over the temperature range of -25 degrees C to 70 degrees C and supplied in a 3-lead clear plastic side-looker package with an integral lens
* High-Resolution Conversion of Light Intensity to Frequency With No External Components
* Communicates Directly With a Microcontroller
* High Irradiance Responsivity (2.3 kHz/(uW/cm²) at 524 nm)
* Low Dark Frequency (<2 Hz at 50° C)
* Single-Supply Operation (2.7V to 5.5V)
* Stable 200 ppm/°C Temperature Coefficient
* RoHS Compliant (-LF Package Only)
|
|
Combine The Positive Timing Action of Gears With the Flexibility, Speed and Low Noise Level of Belts
The Browning HPT® Synchronous Belt Drive line offers a wide range of HP and speeds, from very low speeds - 10 RPM or less - to speed well over 5,000 RPM, with horsepower ratings from fractional to more than 200 HP.
Belt Drive Features and Benefits include:
Significantly Quieter Operation
New Parabolic Tooth Profile
Glass Fiber Cord Tension Member
Neoprene Rubber Body
Nylon Facing Fabric
Positive Drive, No Slip
Lower Belt Tensions
No Lubrication Required
Fully Interchangeable With Competitive Types
|
|
Synchronous components ensure an engaged drive that does not slip. Compared with chain drives, the speed range is more than twice as high while retaining high belt efficiency.
Synchronous belts are most suitable for areas when proper maintenance is difficult or where downtime could prove to be extremely expensive.
|
|
A Complete Selection Of BROWNING Products Leads To The Right V-Belt Drive For Every Application
The extensive BROWNING V-drive line means maximum economy, versatility and prompt availability for your every application - truly the right drive every time...for every service.
With the introduction of the revolutionary B5V Line, Browning brings up-to-the-minute technology to drive design, operation and inventory control. Now - more than ever - when you specify Browning, you select from the most extensive V-belt drive line in the world. New Combination Groove B5V - with 120 components covering 10-75 HP range. Mix and match with conventional A, B and 5V components
|
|
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
| ... products without technical information |
| |
AC induction hoist and traction motors offer higher efficiency and smaller size than DC sepex or series wound motors with the same output and thermal performance.
They are without commutator and brushes and require no maintenance. With this type of motor, acceleration and braking torque at higher speeds are not limited by the commutator, which results in shorter stopping distances without the use of a mechanical brake. They also offer longer battery life and more precise control.
Main features of Iskra AC Induction motors:
* High efficiency.
* High specific power.
* Small size.
* Low noise operation.
* Long life without maintenance.
* Precise control.
|
|
| ... products without technical information |
| |
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
| ... products without technical information |
| |
|
|
|
|
AGIMAG - Magnetically driven agitation - for ultimate leak tightness
Designed to be cleaned and sterilized (in place or in autoclave) and build with FDA components, the AGIMAG® agitators from MIXEL are optimized for all the pharmaceutical, cosmetics and food processing.
INDUSTRIES CONCERNED
Pharmaceuticals, food processing,
light chemicals, cosmetics
APPLICATIONS
* storage
* mixing low viscosity products
* fermentation
PERFORMANCE
From 10 litres to 10,000 litres (enquire for higher
capacities)
High pressure (up to 16 bar)
Up to 150°C
FDA approved MATERIALS
316 L stainless steel polished to Ra < 0.2µm electrolytic
polishing
Bearing blocks made from silicon carbide with no free
silica (other configurations please enquire)
POWER
0.18 to 2.2kW
Transmission by magnetic coupling
MAJOR INNOVATIONS
- tachometer built into agitation head (cleanness,
control, safety by instant stopping of drive)
- clutch device for the magnetic coupling
(maintenance operations made easier)
- compliant with EHEDG cleanability criteria.
|
|
| ... products without technical information |
| |
Advanced Control Features:
- Displacement and force monitoring
- Force control
- Envelope function
- Combo mode
- Energy and time limits
The HF27 High Frequency Inverter precisely controls and monitors electrical AND mechanical weld parameters. Miniature welds are highly sensitive to small heat profile fluctuations in the resistance welding process. Overheating deforms and destroys parts, while under heating results in a weak, unacceptable bond. To achieve consistent, reliable welds of small to microminiature parts, precisely controlled heating is required. This necessitates superior control of the energy output.
|
|
IT251: Frequency Divider, Level Converter and Direction Translator for Encoder Signals
Impulse and frequency divider for incremental encoder signals
Error-free division of quadrature encoder signals, with adjustable ratio from 1:1 to 1:4096,
with separately adjustable divider for marker pulse
Level converter for incremental encoder signals A/B/Z to both directions
(TTL / RS422 to HTL and HTL to TTL / RS422, see drawing)
Includes also translation between various modes of indication of the direction of rotation
Max. input frequency 300 kHz
Power supply 18 - 30 VDC
Compact housing for DIN rail mounting
|
|
FemtoPower1060-x-s are passively mode-locked 300 fs fibre lasers operating in the 1060 nm spectral range and delivering up to 5 W of average power.
The lasers consist of a master source, high power fibre amplifier and optical pulse compressor. The lasers are air-cooled, maintenance free and do not require any adjustments.
APPLICATIONS
Fundamental study
Micromachining
Bio-medical
Metrology
|
|
|
|
see the results for the following category : 
