|
|
The M021P is a PID pump speed controller for accurate temperature regulation of hot water in a storage system.
It controls the temperature of the secondary water flow within a manufacturer of heat exchanger by regulating the hot water flow through the primary of the same heat exchanger.
A very accurate temperature control results and hot water can be obtained at mains pressure. |
|
At ITT Water & Wastewater we produce practical and easy to use monitoring and control systems for many different pump and industrial mixer applications. Our systems offer reduced operational costs, total overview, less report handling and better environmental control.
As well as supplying the hardware, such as pump regulation, sensors, electrical start equipment and cables, we also have professional software for running the system. The ITT Water & Wastewater AquaView SCADA system provides precise and effective monitoring and control.
Each control system comes with a host of well-thought-out functions. Good examples are comprehensive pump control functionality, advanced supervision of pump condition, accurate flow calculation and cleaning functionality. All functionalities are based on international experience in municipal wastewater. |
|
Automation of pumps and cocks helps to cut costs on a permanent basis and safeguards the reliable operation of your installations.
PumpDrive is the first variable speed control system that comes in a uniform housing design for three mounting methods and offers the user a comprehensive solution across a wide performance range. It allows quick, precise and continuously variable speed adjustment of a pumping's drive. Thanks to absolutely reliable rotational speed optimization in line with demand, energy savings to the tune of 50% can be achieved.
LevelControl is an intelligent level control unit for single or double pump systems in applications that require reliable level control. LevelControl professional monitors and documents switching cycles. It ensures even distribution of pumping hours and optimum pump operation. This reduces downtime, maintenance and servicing.
PumpExpert combines three elementary functions. It is the first diagnostic system capable of issuing clear recommendations for action in the event of a disturbance or malfunction.
|
|
The Universal Power Cell uses Hall effect sensors that are not affected by odd waveshapes or frequencies. Also, no Voltage or Current Transformers are used.
The UPC is field scalable to match your pump motor. Complete information at loadcontrols.com.
The PMP-25V Pump Load Control takes the 0-10 volt load signal from the UPC, professional displays the Pump Load, and has the Set Points, Timers and Relay and Analog Outputs. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
A range of cased manual control, variable speed peristaltic pumps manufacturers with flow rates up to 8.0l/min.
Each pump head in the range can be fitted with various tube sizes and materials for even greater flexability.
From the low flow EV045 through the EV500 (shown) to the impresive EV8000 pump all pumps offer high reliability and low maitainence costs. |
|
A range of cased, variable speed peristaltic pumps with professional remote control of 'start' , 'stop' , 'reverse' via analogue signals or volt free contacts and 4 - 20mA or 0 - 10vdc control of speed.
Each pump head in the range can be fitted with a variety of tube sizes and materials to give considerable flexability in terms of flow rate and chemicals that can be handled.
The new 'V025' ( shown ) features keypad control up to 260 ml/min and digital readout of speed.
All pumps in the range offer realiability and low maintainence costs. |
|
Verderflex Peristaltic Professional hose Pumps
GPM PUMPS, Inc. has partnered with VERDERFLEX in order to offer high quality, well designed peristaltic tube and hose pumps. The simple design concepts used by VERDERFLEX to create these pumps benefit the user by providing longer pump life and while minimizing downtime.
VERDERFLEX Peristaltic Hose Pump
The VERDERFLEX hose pump product group consists of a well-balanced high quality range of industrial hose pumps for heavy-duty applications. As with all series of VERDERFLEX pumps, current emphasis is on reduced downtime with minimal maintenance, easy operation and continuous quality improvement.
VERDERFLEX Tube Pump (SMART)
The Verder group's 25 years' experience in peristaltic pumps suppliers has led to a completely new design of low pressure tube pump: the Verderflex SMART series.
|
|
VERDERFLEX Tube Pump (SMART)
The Verder group's 25 years' experience in suppliers of peristaltic pumps has led to a completely new design of low pressure tube pump: the Verderflex SMART series.
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty measurement pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Industrial diaphragm
Mechanically Actuated Refill Cock (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in professional water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated industrial diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function cock allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
MacRoy D
Multi-function discharge cock for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double industrial diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Industrial diaphragm
Triple Diaphragm Design
Double Globe check valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675 |
|
GENERAL SPECIFICATIONS
Designed for continuous operation in industrial applications
Hydraulic "by-pass" mechanism actuates PTFE industrial diaphragm
Very compact package with small footprint
Capacity adjustment from 0 to 100% of rated flow with ±1% steady state accuracy over a 10:1 turndown ration
High performance single and double check valves manufacturer
Integral over-pressure safety faucet
AVAILABILITY Simplex and Duplex available (on most models)
Liquid end materials available: cast iron, 316 stainless steel, alloy 20, alloy C22, PVC, & PVDF (on most models)
Multiple stroking speeds available to cover intermediate flow ranges
Motor mountings available: various integrated motors; API & close coupled NEMA 56C, 48 can frame; API & close coupled IEC 71 B5; and, API 143/145 TC (on most models)
Manual, pneumatic, or electronic capacity control available (on most models)
Double diaphragm rupture detection available (on most models)
ANSI flanges available for suction & discharge connections
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball check valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
The Milroyal has been recognized as the most reliable and robust industrial duty measurement pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Industrial diaphragm
Mechanically Actuated Refill Cock (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in professional water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated industrial diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function cock allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
MacRoy D
Multi-function discharge cock for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double industrial diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Industrial diaphragm
Triple Diaphragm Design
Double Globe check valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675 |
|
|
|
see the results for the following category