|
|
The STD Series mounts have been developed to control or eliminate problems of mounting components on PCBs. These include difficulty in maintaining uniform component height currently requiring the use of mounting jigs and fixtures or tubular spacers. Another is the lack of a suitable method of mounting tri-lead devices. Additionally, ordinary tubular spacers used as standoffs do not provide the necessary vertical or lateral component stability, nor do they protect the leads from electrical shorting. All of these shortcomings are addressed by VCC's new bi-lead and tri-lead component standoffs.
Obtaining uniform LED height control on circuit boards is simplified with the use of these mounts that are available in varying lengths from one hundred thousandths of an inch in increments of ten thousandths of an inch.
The design of this standoff allows for the PCB-mounting of single, dual, and tri-lead devices with centers on standard spacing. The STD Series standoff has a cylindrical body with channels for both lead separation and lateral stability. Incorporated in the channels are tabs which retain the component and standoff as a package allowing for preassembly prior to board stuffing and wave soldering. The mounts' molded standoff pads allow for thorough removal of contaminants resulting from the PCB soldering process.
|
|
Bivar's "Award Winning" Optoelectronics Business Unit represents our fastest growing unit serving a wide-range of customers throughout the world. We Offer the industry's largest choice of Discrete and Surface Mount LEDs, LED Mounts / Spacers / Holders, and LED Assemblies, new products include Hi-Brite LED Modules, Flexible Light Pipes and Rigid Light Pipes, and Wedge-Based LEDs.
|
|
FEATURES
- Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
- Accommodates round and rectangular shapes of LEDs with or without flanges.
- Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
- Mount forms LED leads which are locked into position by retaining tabs.
- Formed LED leads are staggered in their length permitting easier PCB insertion.
- Molded standoffs permit the easy cleaning of PCB after wave solding operation.
SPECIFICATIONS
MATERIALS: Housing - Thermoplastic (black) U.L. 94 V0.
MOUNTING: PCH 175 - Right angle thru-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.
When banded together with the PCH 175 the LEDs are on .250" centers.
LED: 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100" lead spacing. Tri-lead, either .050" or .100" lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another. |
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials) |
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED |
|
PANEL MOUNT INDICATOR LIGHTS
SloanLED has been a leader in panel mount indicator lights for over 40 years. Our products cover a broad range of indicator types; metal body, plastic body, front relampable, rear relampable, fixed lamp, wire leads, QC terminals, Incandescent lamps and LED lamps, etc. Voltages range from 2vdc to 120vac. We offer the brightest LEDs available in both our standard and custom indicator lights. |
|
| ... products without technical information |
| |
In addition to 16 standard sizes for each type, Alupla and Aluplan 100 give yu the option of low-cost manufacture of special dimensiona for variable use.
Thanks to its stability, this aluminium enclosure is ideal for use as a wall, desktop or mobile unit.
The intelligent designof the side profiles makes it possible to insert PCBs on different levels.
Seals specially designed to the match the enclosure offer protection category IP 65 for dimensions up to 1 m x 1x m. |
|
The new concept for applications in measurement, control and automatic control technology.
The design-orientated BOCARD enclosure system is available in 3 basic sizes.
For each size, 2 bases with different heights can be combined with 5 different lid variants. This range of combinations ensures that the enclosure is suitable for an extremely wide range of applications. An additional important feature of BOCARD is the variable terminal compartment, which is an integral part of the design. The terminal compartment can be kept separate from the electronics compartment by means of dividing panels. High parts such as double-deck terminals can also easily be incorporated.
The enclosure with a clear hinged lid or membrane lid provides ingress protection IP 65; all other types provide ingress protection IP 40.
A wide variety of accessories completes the range of products.
As a professional and competent partner in the field of system solutions, in addition to mechanical processing, BOPLA also offers customer-specific membrane keypads or the assembly of complete enclosures including electronic components.
|
|
- Internal separation from Form 1 to Form 4B
- Fixed units (FFF)
- Removable units (WFD)
- Withdrawable units (WWW)
Different types of functional units can be mixed within the same assembly or section, in order to efficiently meet requirements regarding continuity of supply, service conditions or budgetary constraints. |
|
BOTEGO, BOPLA´s enclosure system, sets new standards in enclosure technology.
Thanks to its design, the enclosure, consisting of two plastic half-shells, can be inserted either horizontally or vertically.
Extension sets permit optimal adaptation to the relevant space requirements.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
The ergonomically shaped operating front permits user-friendly operation of the equipment.
In order to achieve natural convection everywhere in the enclosure, the system was developed in such a way that sections with air vents can be mounted directly over each other or also staggered.
The snap-lock technology, which considerably reduces the amount of mounting time and work needed, is a new technological development.
With BOTEGO, every user can create his or her own individual design. Different design elements and caps in 6 different colours can modify the basic neutral enclosure to create an individual touch.
All the elements which vary the design are available ex works.
For enclosure surface designs, BOPLA offers both standard decor foils and customer-specific foils-shape, colour or embossing can be selected individually. |
|
QUICK
QUICK wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are equipped with quick screw covers. Transparent cover options allow easy viewing of installed equipment and indicators.
Dimensions range from 300*200*170 mm to 600*400*270 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
ATEX
EX enclosures are specially made for use in hazardous environments. They are designed, manufactured and tested to international standards. All certificates, such as ATEX, are issued by the manufacturer under license from a test authority. EX enclosures are made of either aluminium, polycarbonate or polyester.
- Aluminium from 45*50*32 to 600*310*180 mm
- Polycarbonate from 188*188*130 to 558*378*180 mm
- Polyester from 75*80*55 to 405*400*120 mm
AL: (ALX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13
PC: (FEX) IP 66; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
PE: (PEX) IP 66/67; IK 08; NEMA Typ 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
|
|
HI-BOX's Wall mounting enclosures are manufacured by HI-resistance polycarbonate, polyester, and ABS. These wall mounting enclosures are suitable for fire-fighting and environment facilities. (good for outdoor) There are two kinds of enclosures: one is hinge type. The other one is screw cover type. We provide working for hole on enclosure by request. Also, we serve for supplying HI quality products with wide color tone and various colors in accordance with your requirement.The dimension of HIBOX's NICE BOX is from 100x130x70 mm to 500x700x 250 mm. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67, NEMA 4X)
Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com |
|
Features:
- Basic structure of the box by two side aluminium extrusion profiles, steel lid/base covers and plastic brackets, to which are fixed both panels.
- Side profiles include rails for mounting PCB's or other components.
- Front brackets include handles in 5, 6, 7 sizes, with lids that can be customized with corporative colour.
- Lid and base cover can be dismounted independently.
- Ventilation slots are provided on rear part of lid and base covers.
- The four small-profile sizes has four non-slip feet. The three larger sizes are supplied with tilt-feet.
- Resistant to temperatures up to 85ºC (plastic pieces ). |
|
We supply 43 different dimensions of enclosures. We are able to deliver the main dimensions needed but also with some specificities like the inversed dimensions (400x600, 600x800, 800x1000).
Our main advantages are the reversible doors, reinforced doors, very wide glande plate for several cable glands, polyurethane gasket injected continuously by the most advanced technology.
This range is completed by a full list of accessories : internal door, depth adjustable bracket, roof, supporting pole, a wide range of locking, modular chassis, ... |
|
| ... products without technical information |
| |
Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin’s battery holder range caters for battery sizes 1/2AA, AAA(R03), AA(R6), C(R14), D(R20) and PP3(6R61), accommodating 1, 2, 3 or 4 cells.
There’s a choice of fixing styles including screw and flange panel fixing, PCB and base mounting versions.
The panel mounting versions are now available in two styles; standard fixing and front panel sealed to IP67, extending the applications into harsher external environments where dust or water would inhibit equipment operation.
The open frame styles are designed to be either PCB or base mounted and most have an interlocking facility to join adjacent holders together.
Principle applications include portable equipment and memory back-up.
|
|
... see all the products in the category
Batteries
|
|
|
see the results for the following category
