|
|
LED-Arrays with red, green or yellow LEDs
Features:
- pre-mounted in single or double LED housings
- array blocks can be separated by hand
- exact orientation and correct polarity are guaranteed with the location pin
- high luminosity with low power consumption
LED-Arrays with blue or bi-color
Features:
- pre-mounted in single or double LED housings
- array blocks can be separated by hand
- exact orientation and correct polarity are guaranteed with the location pin
- convenient and economical protect pins 80-pieces tubes
- high luminosity with low power consumption
- reflow version available
|
|
|
CABLE ASSEMBLIES, CONNECTIONS FOR LEDs, FANS, SWITCHES, ETC.
|
|
FEATURES
- Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
- Accommodates round and rectangular shapes of LEDs with or without flanges.
- Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
- Mount forms LED leads which are locked into position by retaining tabs.
- Formed LED leads are staggered in their length permitting easier PCB insertion.
- Molded standoffs permit the easy cleaning of PCB after wave solding operation.
SPECIFICATIONS
MATERIALS: Housing - Thermoplastic (black) U.L. 94 V0.
MOUNTING: PCH 175 - Right angle thru-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.
When banded together with the PCH 175 the LEDs are on .250" centers.
LED: 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100" lead spacing. Tri-lead, either .050" or .100" lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another.
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
APPLICATION - P-C-LITEs are used as circuit board mounting sockets for status, logic and fault detection lights. Also used for back panel lighting, front panel function lights and mounting of photodetection type devices.
VERSATILITY - P-C-LITEs are relampable, no direct soldering to LED. PCH and SMD series mount horizontally, PCV series mounts vertically. The PCV can be installed on one side of the PCB while the LEDs are inserted from the reverse side of the board.
DESIGN - P-C-LITEs are manufactured from UL listed thermoplastics. Unique contact design permits automatic adjustment to the various sizes and shapes of LED leads. Also accommodate IR emitters, phototransistors and incandescent bi-pin lamps.
INSTALLATION - P-C-LITEs are wave soldered (PCH/PCV) or surface mounted (SMD) to PCB along with other components. Sockets are provided with polarity identification. Molded standoffs permit easy board cleaning. Lock-type security for component leads in high vibration and shock environments.
SPECIFICATIONS
MATERIAL: Housing - Thermoplastic, U.L. 94 V0 (black). Contacts - Phosphor bronze, 60/40 tin plated.
|
|
Vertical LED Assemblies
5mm Narrow Profile
3mm Standard Profile
5mm Standard Profile
3mm Narrow Profile
ELM7
3mm Universal 5-hole Mount
3mm Rectangular
Universal Black Self-Retaining
Universal Natural Self-Retaining
Variable Height Vertical
Right Angle LED Assemblies
Single 5mm LED Holders
Multi-Functional Assembly for 90 ° Display
Sub-Miniature (2mm) 90 °
Single-Level 90 °
Bi-Level 90 °
Tri-Level 90 °
Quad-Level 90 °
Rectangular 90 °
3mm SMD 90 °
5mm SMD 90 °
Panel Mount Assemblies
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
PANEL MOUNT INDICATOR LIGHTS
SloanLED has been a leader in panel mount indicator lights for over 40 years. Our products cover a broad range of indicator types; metal body, plastic body, front relampable, rear relampable, fixed lamp, wire leads, QC terminals, Incandescent lamps and LED lamps, etc. Voltages range from 2vdc to 120vac. We offer the brightest LEDs available in both our standard and custom indicator lights.
|
|
Features
- 1.8 mm sized LEDs save space
- Housing material meets UL94V-0
- Facilitates PCB mounting
- Fast turn on/off time I.C. compatible
- Colors can be mixed in a single housing
- Solid-State, high shock / vibration resistant
- Single color or Bicolor configurations
- Long life / 100,000+ hours (10 years)
- One piece housing
Options
- Sunlight Visible Ultrabrights
- Low Current (2mA) LEDs
- Special colors: Orange, Pure Green, Blue
- Infrareds 840nm, 880nm, 940nm
- Clear illuminator LEDs for backlighting
|
|
APEM, a comprehensive range of professional LED indicators
- LED indicators for panel mounting
- Seven different diameters: 6, 8, 12, 14, 16, 19 and 22 mm
- Three different bezel shapes: prominent, recessed and flush
- Bezel materials plated in bright chrome, black chrome and satin chrome
- Solder lug, quick-connect, pin or wire terminals
- Standard diffused red, green, yellow, blue and white LEDs, plus bi-colour, tri-colour and flashing LEDs
- Complementary range of super bright, water clear LEDs also available (sunlight visible)
- Optional panel sealing to IP67
Integral resistors permit direct connection to 12V, 24V,110V and 230V.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
• Filament lamp or neon illumination
• LED illumination, dc or ac ratings (mains 125/250V dual rating)
• Red, yellow, green, clear or blue colours (as standard)
• Panel mounting holes from 5.8mm to 25mm diameter
• Front of panel sealing to IP54
• Wide choice of profiles
• Circular and rectangular formats
• RoHS compliant
|
|
VCC's CMS 322 lens is designed to provide a means of protecting equipment from both drip or splash conditions while displaying panel or circuit board mounted LEDs.
The traditional methods of moisture sealing have been the use of bulky military style indicator lights requiring o-rings, nuts and washers. While these units are effective, they do not provide aesthetics desired in today's modern equipment designs. As a result, engineers faced with the problem of moisture sealing are forced to design elaborate display panel windows with special gaskets. When limited by design funds, engineers have attempted to seal standard panel lenses or indicator lights with adhesives such as RTV. These methods are very expensive in component hardware, extremely labor intensive and lack required aesthetics.
VCC's CMS 322 low-profile lens is equipped with a moisture sealing gasket. Tests by an independent environmental testing laboratory have shown that the lens provides an effective seal against splash and drip conditions. In addition to the water tests, the lens and retaining systems were tested up to 6Gs of shock and from 0 to 2000Hz of vibration. An operating temperature test from -40°C to +85°C and a UV test were also performed. The conclusions attained upon completion of these tests were that the CMS Series lens and the retaining systems used exceeded all test criteria.
|
|
The STD Series mounts have been developed to control or eliminate problems of mounting components on PCBs. These include difficulty in maintaining uniform component height currently requiring the use of mounting jigs and fixtures or tubular spacers. Another is the lack of a suitable method of mounting tri-lead devices. Additionally, ordinary tubular spacers used as standoffs do not provide the necessary vertical or lateral component stability, nor do they protect the leads from electrical shorting. All of these shortcomings are addressed by VCC's new bi-lead and tri-lead component standoffs.
Obtaining uniform LED height control on circuit boards is simplified with the use of these mounts that are available in varying lengths from one hundred thousandths of an inch in increments of ten thousandths of an inch.
The design of this standoff allows for the PCB-mounting of single, dual, and tri-lead devices with centers on standard spacing. The STD Series standoff has a cylindrical body with channels for both lead separation and lateral stability. Incorporated in the channels are tabs which retain the component and standoff as a package allowing for preassembly prior to board stuffing and wave soldering. The mounts' molded standoff pads allow for thorough removal of contaminants resulting from the PCB soldering process.
|
|
Bivar's "Award Winning" Optoelectronics Business Unit represents our fastest growing unit serving a wide-range of customers throughout the world. We Offer the industry's largest choice of Discrete and Surface Mount LEDs, LED Mounts / Spacers / Holders, and LED Assemblies, new products include Hi-Brite LED Modules, Flexible Light Pipes and Rigid Light Pipes, and Wedge-Based LEDs.
|
|
VERSATILITY - CLIPLITE, installed in display panel, is used with PCB mounted LEDs. Lenses remain attached to the display or panel door while the LEDs are fixed to the PCB. The lenses are ideal for use together with the CONXRITE connector assembly.
BRIGHTNESS - CLIPLITE utilizes fresnel rings to increase apparent brightness and viewing angle up to 180 degrees with either diffused or nondiffused LEDs.
PROTECTION - CLIPLITE helps prevent IC failures caused by electrostatic discharge (ESD). Introduction of EDS through an exposed panel mounted LED is capable of damaging or destroying a semiconductor. A CLIPLITE mounted LED helps guard components from ESD up to 16 kV while affording the LED physical protection.
INSTALLATION - CLIPLITE is inserted through panel opening, retaining ring is pressed into place. PCB mounted LEDs slide into lenses when the panel cover is closed or the PCB card is inserted into the case.
SPECIFICATIONS:
MATERIAL: Lense - Polycarbonate; Ring - Polypropylene (U.L. Listed Materials)
|
|
| ... products without technical information |
| |
|
|
