|
|
J1800 - Format DIN 96x96
J2000 - J2400 (J2100 / J2200 / J2300) - Format DIN 144x144.
The most basic models.
They are intended to replace filament indicator lights on cabinet front panels.
- 8, 12 or 24 "high luminosity" leds.
- Light up on closing of the input contact.
- "Test led" buttons on the front panel.
- Labels are easy to make (on PC).
- Economical and strong.
Option:
Remote carry "synthesis" relay, selection is channel by channel. No reset possible.
(See also the J1900 / J3000 / J3500 range of alarm sequence panels)
|
|
EZ-LIGHTTM Operator Indicator Lights
- Displays multiple colors of highly visible LEDs in each unit
- Offers five housing styles for easy integration
- Replaces post or stack lights with a single compact unit
- Installs without certified personnel, near the operator
- Several configurations for a variety of applications
- Displays one to five colors, depending on model
- Eliminates bulb replacement with long-lasting LEDs
- Compatible with PLC or other logic-level control outputs
- IP67 for direct machine mounting
|
|
This range of panel mounting LED indicators consists of many different bezel styles, types of LED’s and colours. The range has developed to meet the many different needs of panel design including IP67 environmentally sealed versions for use where a front panel seal is needed.
The vandal resistant LED indicators are designed to complement the vandal resistant switches (see the Switch Section, page 177), they have similar profiles with stainless steel bodies, sealing to IP66 & 68 and are built to withstand harsh environments.
|
|
|
EAO indicators / pilot lights with protection up to IP 67 and different coloured lenses and LED illumination. The indicator / pilot light can be modified with bezels for raised or flush mounting.
|
|
KRN - Pilot Light Head
description:
Body: LMN -
Pilot Light Head 24 x 18 mm
description:
with labelling option
LXJL5 - Pilot Light 54 x 27 mm
description:
T5.5K socket
LXJN - Pilot Light Head 54 x 27 mm
description:
with labelling option
LXJNN - Pilot Light Head 54 x 57 mm- IP40
description:
accepts 2 separate lampholders, with labelling option
LXL5 - Pilot Light 25 x 50 mm
description:
with labelling option
|
|
APEM, a comprehensive range of professional LED indicators
- LED indicators for panel mounting
- Seven different diameters: 6, 8, 12, 14, 16, 19 and 22 mm
- Three different bezel shapes: prominent, recessed and flush
- Bezel materials plated in bright chrome, black chrome and satin chrome
- Solder lug, quick-connect, pin or wire terminals
- Standard diffused red, green, yellow, blue and white LEDs, plus bi-colour, tri-colour and flashing LEDs
- Complementary range of super bright, water clear LEDs also available (sunlight visible)
- Optional panel sealing to IP67
Integral resistors permit direct connection to 12V, 24V,110V and 230V.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks.
|
|
• Filament lamp or neon illumination
• LED illumination, dc or ac ratings (mains 125/250V dual rating)
• Red, yellow, green, clear or blue colours (as standard)
• Panel mounting holes from 5.8mm to 25mm diameter
• Front of panel sealing to IP54
• Wide choice of profiles
• Circular and rectangular formats
• RoHS compliant
|
|
VCC's CMS 322 lens is designed to provide a means of protecting equipment from both drip or splash conditions while displaying panel or circuit board mounted LEDs.
The traditional methods of moisture sealing have been the use of bulky military style indicator lights requiring o-rings, nuts and washers. While these units are effective, they do not provide aesthetics desired in today's modern equipment designs. As a result, engineers faced with the problem of moisture sealing are forced to design elaborate display panel windows with special gaskets. When limited by design funds, engineers have attempted to seal standard panel lenses or indicator lights with adhesives such as RTV. These methods are very expensive in component hardware, extremely labor intensive and lack required aesthetics.
VCC's CMS 322 low-profile lens is equipped with a moisture sealing gasket. Tests by an independent environmental testing laboratory have shown that the lens provides an effective seal against splash and drip conditions. In addition to the water tests, the lens and retaining systems were tested up to 6Gs of shock and from 0 to 2000Hz of vibration. An operating temperature test from -40°C to +85°C and a UV test were also performed. The conclusions attained upon completion of these tests were that the CMS Series lens and the retaining systems used exceeded all test criteria.
|
|
|
The ET-16 (Incandescent) and ET-17 (Neon) indicating lamps are designed for application on switchboard panels up to and including 1/4-inch thickness. The lamps economize on space and permit easy replacement of bulb and resistor.
|
|
| ... products without technical information |
| |
Analog Input Flow Indicator - Series FIV
Flow Rate and Totalization
Sight Flow Indicator - Series SF2
1/4 to 1" Connection Size, SPDT or Pulse Output, Window Style
Sight Flow Indicator/Transmitter - Series SFI-800
1/2 or 3/4" Connection Size, Optional Output Sensor Package
Sight Flow Indicator/Transmitter - Series SFI-100T
1/2 or 3/4" Connection Size, Optional Output Sensor Package
|
|
Visoflow WR1-...GM/GK
Mechanical Flow Indicator for liquids, with a rotor for quantitative flow indication in a special tube-shaped glass housing. A signal-red rotor provides a directly flow-proportional indication of the momentary flow-rate. Rugged design in brass or stainless steel.
cleaning mechanism of the internal surface of the glass
visibility of rotor 360°
floating bearing for liquids
grease-free ball bearing for gaseous media
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAA
Flow Indicator with Rotor DAH
Rotating Vane Flow Indicator DAF
Rotating Vane Flow Indicator DIH
Rotating Vane Flow Indicator DIG
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
|
|
|
Flow Indicator, Paddlewheel. This polystyrene, bright red paddlewheel indicates liquid or gas flow from 5 ml/sec to 95 ml/sec. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. Not for use with corrosive fluids or temperature over 122° F (50° C). Can be used to connect tubing I.D. of 3/8" to 9/16" (10-14 mm) I.D.
|
|
|
Designed with body in aluminium, nickel-plated brass or 304 stainless steel. Execution with visual indication only, graduated scale on the glass tube, max. pressure 15 bar and 0,1 to 60 LPM flow rate; electric execution with visual indication, 1 or 2 adjustable alarm points, max. pressure 15 bar and 0,1 to 60 LPM flow rate; simple electric execution with 1 or 2 adjustable alarm points, max. pressure 150 bar, 0,1 to 140 LPM flow rate. All these models can be supplied with specific springs depending on the fluid viscosity up to 200 Cst. Electric execution for water application with 1 or 2 adjustable alarm points, 0,3 to 60 LPM flow rate, max. pressure 50 bar.
|
|
- Piston type
- Fluid : Water , oil , other liquid available
- Flow range : 15 ~ 24000 l/h (at Water)
- Accuracy : ± 3 % F.S , On request : ± 2.5 % F.S
- Size : 1/4" to 2-1/2"
- Connection Size : NPT , Flange Type on Request
- Working Limits : Temperature : -10°C to +150°C
- Max. Pressure : 30 kg/cm²
- Housing enclosure : IP 65
- Housing material :
NS,CS,MS types-Aluminum Alloy
ES type-316SS
- Lens material:Safety glass
- Mounting:Vertical,horizontal available
- Materials : Brass , 316SS wetted parts
- Alarm switch : Micro switch,inductive switch available
|
|
|
Pointers of passage who come used for the visual control of the flow of liquids in the pipages, realized or in the flangiata version that in the threaded version, to single and double crystal, realized in grey cast iron, brass, carbon steel, stainless steel until to series PN 25.
|
|
-Large operating temperature range
-Small size
-Variable fitting position
-Simple to mount
The airflow monitor (NC/NO) is designed to indicate the loss of air movement of a fan or filter fan.
The contact detects the loss of air movement caused by fan failure or blocked filter media regardless of direction of air.
Its simple mechanical operation makes it a viable alternative to
electronic monitoring systems.
Approvals: UL File Nr. E 250507
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
