|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us
|
|
|
The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control.
|
|
With UNIQLE, SCHÄFER is systematically implementing the principle of a cooling system integrated in the server rack. The decision for integration is a logical step.
Server space is not unlimited! And through the trend to higher and higher computer performance accompanied by a greater packaging density, server racks must assure a maximum of space efficiency. This enables
a maximum computer density per m2 floor space to be achieved.
|
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 ¾" x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment.
|
|
Computer & Documentation Stations
These stations are built to answer the ever increasing need for
documentation and I.T on the shop floor.
Document stations come a lockable drawer and full cupboard with
optional backpanel system.
Computer stations feature slide out keyboard drawers, full
cupboards, some with sliding shelves and a choice of open or
enclosed monitor areas.
Workstations
Perfect for supervisory or general workshop use, these units combine secure
storage with a sloping worksurface.
• Solid steel construction with reinforced doors
• Lockable cupboard with 2 adjustable shelves
• Lockable drawer
• Document retaining lip
All models are supplied with fronts in epoxy powder coat RAL5015
blue as standard. red, green, mid or light grey fronts are available as
a no cost option. Housing / shelves are RAL7035 light grey.
All prices include delivery to mainland U.K and are subject to V.A.T.
Delivery time in standard blue is 2-3 weeks
|
|
|
For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables.
|
|
Machine tool cabinets offer high storing capacity on a small footprint; they require little storage space and reduce installation costs.
Tools and operating materials are stored directly on location. Machine tool cabinets can ensure value conservation and effortless use of the valuable stored goods in the very best way. The cabinets are available with hinged or sliding doors
|
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Crash Cart Enclosures. The modularity of the DYNICS Crash Cart will allow you to essentially build your own "custom" box. Once the enclosure is specified with the Crash Cart Configurator, DYNICS will develop a drawing and then send for your approval ensuring that the appropriate solution has been created. Some of the Crash Cart features include:
- Painted Steel OR Stainless Steel Construction
- Rugged Modular Construction
- Configurable Cable Connections
- Gasketed Doors and Openings
- Lockable Front Doors and Keyboard Tray
- Swivel Touchscreen Display
- Non-Marking Caster Wheels
|
|
- dismountable aluminium cabinet frame
- passively ventilated viewing doors (side
perforations) with turning lever lock
- rear door with fitted perforated panel
(48% perforation) with turning lever lock
- two asymmetrically split side walls with
sash fastener locking mechanism
- two 19" levels depth adjustable assembly
options for the integrated
19" parts (see top view cabinet frame
page 2.3 "Technical information")
- 3-part bottom plate- closed
- closed top plate
- base with tilt prevention D=1150 mm
- earthing set 2.5 mm2, mounted
- 19" screw set M5, 50 pcs
Delivery:
fully assembled, base included
(with H=2000 mm)
|
|
SP54 Rack
- High-grade steel cabinet (light grey RAL 7035, black RAL 9005). Profi le technology guarantees maximum stability
- Fully assembled with basic accessories
- Flexible interior − designed to accommodate all currently available IT components
- Simple to assemble and disassemble − all cabinets can be dismantled
- Accessible from all sides (removable doors and panels)
- Can be used as stationary or mobile units
- 100% modular system, can be extended at any time
- Extremely strong frame with load bearing capacity of up to 1000 kg
- Protection rating: IP54, all-round sealing
|
|
- The most up-to-date cabinet solutions for all standard server and network components even for combinations of components from
different manufacturers
- Maximum assembly range: 900 mm deep, 600 mm wide
- Maximum security: side panels attachable/detachable with lock,
doors with pivoted handle and lock
- Optimum ventilation (active or passive)
- Simple to assemble and disassemble − all cabinets can be dismantled
- Mobile or stationary application possible
- In light grey RAL 7035 or black RAL 9005, inc. accessories in black
- Extremely strong frame with load bearing capacity of up to 1000 kg
|
|
|
|
|
|
Application
Designed deeper to house servers and manage power cables, PROLINE® FLOTEK™ Cabinets rely on optimized passive airflow for thermal management. The cabinets may be placed in data rooms randomly or in hot/cold aisle configurations.
Features
• Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability
• Fully perforated front and rear doors and fully perforated top allow maximum air movement around equipment; conforms to server manufacturer open space requirements
• Models without sides fit together quickly for easy installation in ganged applications
• Three-point locking pushbutton swing handle on front door provides easy but controlled access; two keys included
• Rear doors are split for easy access and include 3-point, low-profile, locking swing handle
• Two sets of 19-in. square-hole rack angles support both front and rear of equipment
• Rack angles are infinitely adjustable from front to rear for positioning flexibility
• Large gland plate in top allows easy routing of cable, pre-terminated cables and patch panels
• Mounting hardware (20 each of 10-32 screws and cage nuts) is included
Specifications
• 16 or 14 gauge steel doors, sides and cover
• Welded 12 gauge steel frame
• Rack angles have square holes with EIA 310-D spacing
• Open bottom with integral bolt-down brackets
Finish
Phosphatized steel coated with RAL 9005 black textured, low-gloss polyester powder paint. Other finishes available—contact Hoffman Customer Service.
Patents
|
|
Project and Effi ciency Range with low-cost
Complete Cabinets for networks
- Models for maximum market coverage with
43 U in heights of 2000, depths of 800 and
widths of 800 mm
- Extremely strong framework with a load
bearing capacity of up to 700 kg
- Frame can be "halved"
- High quality powder coating fi nish in light
grey RAL 7035 on all panelling components
- All panelling, such as side panels and doors,
can be removed in seconds
- Top and bottom modules prepared for brush
strips and/or ventilators
- Doors fi tted with T-handles and locks. Can be
exchanged for pivoted handles
- Plinths are always passively ventilated,
100 mm high
- Standard depth-adjustable 19" mounting
angles
- Extremely high savings on each baying solution
Material:
- Framework, vertical: 1mm steel sheet, multiply
profi led;
- Horizontal: 2 mm rectangular tube.
- Panelling: 1 mm steel sheet
|
|
The computer cabinet is designed for protecting
computers against dust, knocks and bumps in industrial environments. The top part has an opening of 590 x 650 mm with lockable door fitted with a Plexiglas window, lockable, pullout keyboard shelf and mouse mat and a shelf.
The bottom part has an opening measurement of 590mm x 855mm with a single lockable door
|
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee
|
|
PKM-400 e PKM-500
PKM series cabinets are made up of a main unit and tempered glass door.
Two product families belong to the PKM system, with different cabinet depths: PKM-400 and PKM-500.
The removable side walls allow the access to the rear cabling while at the same time guaranteeing securety since they can be removed only after the front door has been unlocked.
PKM-400
DEPTH 413 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0749 - h 360 mm - 6U
MAGN0750 - h 493 mm - 9U
MAGN0751 - h 626 mm - 12U
MAGN0752 - h 760 mm - 15U
MAGN0972 - h 1027mm - 21U
PKM-500
DEPTH 513 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0753 - h 360 mm - 6U
MAGN0754 - h 493 mm - 9U
MAGN0755 - h 626 mm - 12U
MAGN0756 - h 760 mm - 15U
MAGN0973 - h 1027 mm - 21U
|
|
AdvancedTCA Integrated Platforms
Kontron offers comprehensive pre-integration and pre-validation services for its AdvancedTCA open modular platforms. Available in different form factors, the line of Kontron OM platforms are reliable, scaleable and always the best configuration from the very start.
Please visit Kontron AdvancedTCA boards and review the Kontron portfolio of GbE and 10GbE AdvancedTCA platform elements including multi-core processor boards, switches and AdvancedMC carrier boards.
Please visit the Kontron AdvancedMC modules section for a complementary line of processor, I/O and storage AdvancedMC modules.
|
|
- Integrated Systems
14 slot dual star or full mesh system; AdvancedTCA systems available in Stock-2 week delivery!
- ATCA backplanes
- Front Panels & Accessories
Hot Swap AdvancedTCA handle and AdvancedTCA Sheet Metal front panels and air block filler panels
- Adapter Boards
- Shelf Management
|
|
Features:
- Using the features of AdvancedMC, MicroTCA provides high performance and high availability in one system. MicroTCA has the advantages and technology of AdvancedTCA but in a small form factor. This new technology is used in multiple industries with many different applications. In general, every application of AdvancedMC modules is also possible with MicroTCA modules. Schroff will supply development tools, standard applications and customised systems to further develop this new technology.
|
|
Monitor enclosures
Example/ applications
* Enclosures for touch panels
* Enclosures for light panels
* Enclosures for plasma screens
|
|
INNOVATIVE PRODUCTS
- Monobox structure
- Sections made from 19mm composite extruded material, self-coloured
(white) and complying with hygiene standards
- Smooth surface for easy cleaning
- No sharp corners to prevent accumulation of dirt
- M1 self-extinguishing fire classified
- High mechanical strength eliminating any risk of condensation
or bacterial development
- High modulus of elasticity guaranteeing high resistance to pressure
and knocks
- High resistance to abrasion
- Sealing to IP 65
Access from the front:
- Opening/closing with sliding curtain made from articulated thermoplastic
sections (food quality) guided by 2 PVC runners with seals
- 2 handles for easy manoeuvring
- Closed curtain, sealed compartments with directional water jet or foam
cannon projections
Access from the rear:
- Removable panel, sliding vertically, giving access to the rear of the IT
equipment (cables, maintenance)
- 2 height adjustable trays (on vertical runners)
|
|
Laser printer protection in hostile environment
(dust, freeze, deep freeze, washing...)
Made of composite material (thickness 10mm)
Thermoforming processed structure (rays sweetened)
Smooth aspect for easy cleaning and avoiding the accumulation of waste.
Plexiglas lid with actuator
Filtered air ventilation with extraction calories system
Front access for paper
|
|
PROTECTION & SECURITY: maintaining the best protection against dust, bumps, water, washing...
MODULARITY: large compatibility to fit every printer
Description:
Molded into one piece
Sliding tray: Printer placed on a tray, removable by means of the front shutter. Tray mounted on stainless steel runners
Smooth surface.
Acrylic sliding front panel with opening for printings and easy access to printer
Cable grommets through panel
Easy access to printer and labels
Easy access to front and back panels (2 doors)
|
|
|
|
|
|
ROTECTION OF LARGE FORMAT THERMAL
PRINTERS used in the processing industry.
DESCRIPTION:
• Sides made from 19mm-thick composite material, self-coloured (white),
complying with hygiene standards in force
• Heat-formed monobox structure (rounded edges)
• Smooth surface for easy cleaning and to prevent the accumulation
of dirt
• Fire rating M1 self-extinguishing
FEATURES:
ACCESS TO THE PRINTER:
• Complete side access
• 1 lid with handle, opening vertically
• 1 hatch
• Sealed housing
• KDL cable outlet device
FRONT
• Shutter in transparent, colourless acrylic glass (PMMA) or in composite,
opening vertically and mounted on positioning clips
• This shutter allows access to printer controls and labels to be collected
• A “light” for direct release of labels can be fitted to order
“DEEP FREEZE EQUIPMENT” (TO -30°C)
• Continuous heating within the hatch, by means of a convection
ventilation system with thermostat (maximum power 350 W)
• For an exterior temperature of -27°C (front shutter closed), the
temperature inside
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
Permanent availability of your IT systems is undoubtedly crucial.
This is your company's heartbeat. For this reason, it is important to ensure stable conditions for your complex server and software system architecture. With this in mind, Rittal combines the five key elementary infrastructure components to create an extremely variable, and above all secure system:
Rack, Power, Cooling, Security, Monitoring & Remote Management.
With Rittal, a high level of IT availability is guaranteed.
|
|
Elma offers AC and DC horizontal enclosures in 2U and 5U heights and a DC-only version in 4U height. They include a wide range of backplane, shelf management,and other options. Pluggable and redundant fan trays, PEMs and shelf managers provide the highest level of availability (99.999%). The units have been optimized via backplane signal integrity studies and chassis thermal simulation.
The 2nd Gen 19" rackmount vertical ATCA chassis is designed for carrier-grade applications. The 13U chassis features a 14 -slot Dual Star or Mesh backplane. The unit is fully pluggable, designed for NEBS compliance, and radial or bussed IPMB shelf management. The chassis has been optimized via thermal simulation studies.
|
|
Everyone talks about the future, but Rittal helps shape it – and that includes the field of climate control.
Development work focuses on the holistic protection of process control with the minimum possible energy consumption.
Modern cooling units with excellent efficiency and perfect interface technology, together with liquid cooling concepts, offer fresh new perspectives for the correct cooling of electronic components. This is crucial to the availability and reliability of machinery and IT technology.
For this reason, Rittal collaborates closely with you to develop customised climate control concepts.
|
|
 see the results for the following category : Labware |
|
|
