|
|
|
We offer an extensive range of products for industrial PCs to the ATX standard, from 482.6 mm (19") rack-mount versions in 1, 2 and 4 U, through to solutions for direct mounting on mounting plates.
|
|
BMX-R10 System
The BMX-R10 Mini-ITX System supports the Avalue EMX-M6901G Mini-ITX motherboard. The system features an onboard AMD 200U 1GHz processor, a 2.5 HDD drive bay, and supports up to 4GB of DDR2 SODIMM memories. The rear panel I/O ports include USB, VGA, DVI, COM, KB/MS, LAN, Audio and a DC-in jack. The front panel has a power status LED indicator. The BMX-R10 system has a metal, seamless, black chassis that can be wall mounted or stand on a desktop. It measures only 260mm in width, 186mm in depth, and 58.5mm in height. It uses a 60-watt power adaptor.
MBX-R10 Features:
Cost Effective Industrial Design
Rigid Metal Chassis
2.5 HDD Drive Bay
System Fan Inside
Design for Compact but Easy to System Configure
60W AC Adapter / 12 Vdc in
Mounting Bracket for Wall/Desk Mount Applications
|
|
|
MicroTCA is complementary to PICMG3.0 ATCA. Where AdvancedTCA is optimized for very high capacity and high performance applications, MicroTCA is designed to address cost sensitive and physically smaller applications with lower capacity, performance, and perhaps less stringent availability requirements. MicroTCA preserves many of the important philosophies of AdvancedTCA, including basic interconnect topologies and management structure.
|
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
- high-quality design
- aluminium circular extrusions
- colour specified by customer
- Symmetrical
- all pieces can be mounted on all sides (4 doors possible)
- all parts mounted on the aluminium extrusions can be installed
on the front and sides
- Installation advantages
- side panels can be plugged into place and locked with a
sash fastener
- sliding roof and floor pieces for cable entry with integrated
tension relief
- 19" mount, adjustable mounting depth (right and left)
- can be dismantled
- high stability
- 19" and metric system solutions
|
|
|
|
|
|
The market-leading Diplomat enclosure has been the informed experts choice for many years. Available as a 19 desktop enclosure for direct mounting of subracks, a 19 caseframe for direct mounting of boards and modules and a vertical tower unit, the elegant enclosure is at home in any environment from the development laboratory to the office. A full range of accessories enables the Diplomat to be tailored to the application.
19 cases
The flagship 19 case is a stylish, robust and economical enclosure for housing subrack mounted electronic systems. Available in horizontal and vertical configurations, the Diplomat case can provide a thermally managed, EMC capable enclosure suitable for stand-alone systems; it can be used as a housing for development work in the laboratory or as a server or router housing for small networks. The vertical units can be positioned under the desk to save space.
* 3U, 4U, 6U and 9U heights
* 2 widths and 3 depths
* Plain or ventilated options
* Fan plinth option provides forced cooling
* Customisation service to suit specific applications.
|
|
Vitaro 195
ZENITH 160
BERLIN 150
apra Line 140
Tamago 185
apraTek 180
19" enclosure system 179
|
|
|
|
|
|
PROLINE Voice and Data Cabinet
APPLICATION
This pre-assembled package meets all of the most common voice and data requirements and is available in two colors and five sizes.
Optional PROLINE components and DataCom accessories may be added to your original package or ordered separately.
FEATURES
Mounting channels (4) provide infinite front to back adjustment of rack angles
Rack angles are coated with black polyester powder paint
Front acrylic window door with key lock offers unobstructed visibility
Fully louvered rear door provides excellent ventilation, keeping equipment cool and extending its life
Quick release latches on side panels provide easy service access
Fan ready top with two cable entry ports for easy access and service
Open base for easy access and service
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
CONSTRUCTION
Fully welded heavy gauge steel frame
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
Both front and rear doors have lockable handles
Mounting hardware (20 10-32 screws) is included
FINISH
Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service.
INDUSTRY STANDARDS
EIA 310-D
LOAD RATING
Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman.
|
|
|
|
|
|
NT Box 3-part Wall Cabinets - For optimal accessibility from 4 sides
High-grade steel housing (light grey RAL 7035) complete with basic
equipment.
-Hinged centre section, 500 mm, with a twoway ock
-Optimum accessibility for fast installation: once the door is open, the side
panels can be drawn forward
-Mounted ready for installation, glass door at front, inc. lock, central swivel
mounting frame,19 mounting angles at front, cable entry apertures in top
and bottom .
-Transportable packaging for single units
-Overall depth of 650 mm, from 6 - 18 adjustable
shelf height units.
The wall-mounted 3-part NT Box was specially
developed for small networks, sub-distributors
and fl oor distributors.
The major practical problem of accessibility is
solved by the fact that the door can be very
quickly removed once opened, allowing the side
panels of the centre section to be slid out forwards.
In addition, the entire centre of the box can
be swung out to one side.
This way, the housing is easily accessible from
all four sides and allows all components to be
installed easily.
To change the doors from left to right-hand
opening, simply lift out the hinge pin and replace
them in the fi xings provided.
|
|
|
|
|
|
Intel Server Chassis are designed and validated for easy, cost-effective integration with Intel Server Boards. A full line-up of pedestal and rack-optimized chassis are available to meet your customers' diverse needs.
Intel Server Chassis SR1500 is a performance 1U rack-mount chassis. Feature set supports the high-density server market
with: improved serviceability, accessory kits allowing
for configuration options and Intel Cable Reduction Technology that simplifies server infrastructure by eliminating cables to support up to three hot-swappable SAS (Serial Attach-SCSI) or SATA (Serial ATA) hard drives and one slim-line optical device.
The Intel Server Chassis SR2500 features integrated manageability with upgrade options including flexible drive configurations - up to 6 SAS or SATA HDDs or 5 drives plus tape and SAS RAID options which increases data protection and HDD I/O performance. Intel Server Chassis SR2500 is designed for increased uptime and tool free serviceability.
The Intel Server Chassis SC5400 offers an ideal solution for a variety of business environments. With great reliability, wide-ranging scalability, strong manageability, the SC5400 is a solid, cost-effective solution for a range of environments, from small businesses to database servers. The SC5400 chassis family supports SAS, SATA and SCSI drives for configuration and application flexibility. Applications needing maximum reliability, serviceability and uptime can benefit from the SC5400LXI SKU, which integrates fully redundant hot-swap power supplies and fans, and support for 6-drive hot-swap SAS/SATA drives.
|
|
Are you looking for a file cabinet that offers greater flexibility? Are you thinking of a lateral file cabinet for extra storage space? What would you say about a file cabinet that offers even more? The multi-purpose cabinet is your solution.
Montel offers a complete range of storage and file cabinets for all types of material. The cabinets include accessories making various configurations possible, sure to satisfy your most particular needs.
The cabinet may be purchased with a lock providing a secure storage solution for your personal items or confidential documents (client files, patient records, accounting statements, etc.).
Ideal for office, institutional and industrial applications, Montels multi-purpose cabinets are indeed multi-purpose and practical.
|
|
The handling and conservation of rolls of textiles require flexible, large capacity storage systems.
The cantilever shelving system from Montel is designed to store various lengths of rolls, maximize the use of available space and facilitate handling.
Montel can also provide cabinets that recreate the microclimate needed for storing fragile items and valuable collections (ventilation slots, trays and windows on the doors).
|
|
|
A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front.
|
|
1U Industrial Rackmount
Model PRS-1174
19" 1U Height rack-mount micro-ATX based server with four drives
2U Industrial Rackmount
Model PRC-2193
19" 2U industrial rack-mount chassis for M/B version
3U Industrial Rackmount
Model AREMO-3194E
19'' 3U rack-mount chassis for ATX M/B platform(adopt PS/2 Power supply)
4U Industrial Rackmount
Model AREMO-4196
The Best Cost-Performance 19" 4U Height Pentium 4 Processor Based Rack-mount Computer
5U Industrial Rackmount
Model IRC-750
19" 5U rack-mount CTI chassis with 6 drive bays
6U Industrial Rackmount
Model IRC-860
19" 6U rack-mount CTI chassis
Industrial Node Chassis
Model AREMO-6163
6-slot full-sized industrial node chassis (Shoe-box)
|
|
Description
The GX7600 Series mainframes are compact, 9-slot PXI chassis that can accommodate up to 8 instruments as well as an embedded single slot PXI Express controller such as the GX7940 or a PXI Express external bus controller such as the x1 or x4 MXI - PXI Express interface. The GX7600s compact 3U form-factor occupies only 9x18 inches of bench space, making it ideal for benchtop or space constrained applications. And when combined with 8 peripheral slots, integral Smart functions, and the bandwidth of PXI Express, the GX7600 represents a new level of performance, capabilities and value for PXI mainframes.
|
|
PAC-Xscale-12 The PAC-Xscale-12, industrial PC, includes a 12.1" display for applications requiring a larger, higher resolution display than our original industrial PC, the PAC-Xscale. It carries UL; Class 1 Div 2 (A, B, C, D); ATEX Class 1 Zone 2; and CE Mark approvals.
PAC-Xscale The PAC-Xscale, our smallest flat panel computer, offers versatility and durability to meet application requirements in any environment. With a 5.7" color TFT display, this industrial PC requires a minimum amount of space to perform.
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
Highlights
1Gb PICMG 2.16 platforms
Easier integration - bring solutions to market faster
Comprehensive shelf management throughout platforms
Flexibility and scalability, maximizing reuse
Targeted at high availability and standard applications
Wide range of interoperable blade functionality
- Single Board Computers
- I/O & Communication
- Media & Voice Processing
- Storage
- Embedded SS7 & SS7/IP
- Carrier Blades
|
|
Driver Bays 3 x 5.25ff Bay, 1 x 3.5ff Bay, 6 x 3.5ff removable sata HDD Bay
System Control Power Switch button, Host Power Switch button, Reset button, Keyboard-Lock button, DC Input
System Cooling Fan 6 x cooling fan
Power Supply Support ATX/PS/2 Power supply
Vibration 0.5g rms/5`500Hz/random operation
EMC CE/FCC Class B
Construction Heavy duty steel
Operating Temperature 0`50
Operation Humidity 5%`95%, 40, no condensing
Dimensions 482mm~540mm~177mm (W~D~H)
|
|
one cabling solution for your equipment
- Ten sizes of cable ducting plus associated accessories.
- Optimal ducting sizes for maximum cabling capacity.
- Simplified installation:
- snap-off tongues for cable entry,
- 4 types of fixing accessories to suit the application: screw, clip-in, door mounting and chassis mounting.
- Important: no metal component parts enter the inside of the trunking, thus maintaining electrical insulation.
|
|
PCI enclosures
Internal and end enclosures with knock outs
Plastic enclosure system withIngress protection IP 66
Version with coloured cover
Classified product range with 13 enclosure variants from 65 x 65 x 57 mm to 254 x 355 x 111 mm
Easy to modify
Extensive range of accessories from installation plates to insulating stoppers
|
|
| ... products without technical information |
| |
 see the results for the following category : Labware |
|
|
