|
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Are you looking for a file cabinet that offers greater flexibility? Are you thinking of a lateral file cabinet for extra storage space? What would you say about a file cabinet that offers even more? The multi-purpose cabinet is your solution.
Montel offers a complete range of storage and file cabinets for all types of material. The cabinets include accessories making various configurations possible, sure to satisfy your most particular needs.
The cabinet may be purchased with a lock providing a secure storage solution for your personal items or confidential documents (client files, patient records, accounting statements, etc.).
Ideal for office, institutional and industrial applications, Montels multi-purpose cabinets are indeed multi-purpose and practical.
|
|
The handling and conservation of rolls of textiles require flexible, large capacity storage systems.
The cantilever shelving system from Montel is designed to store various lengths of rolls, maximize the use of available space and facilitate handling.
Montel can also provide cabinets that recreate the microclimate needed for storing fragile items and valuable collections (ventilation slots, trays and windows on the doors).
|
|
|
|
|
|
APPLICATION
The 2-Post Open Frame Rack is a key element in a structured cabling system. With models sized to fit either 19 in. or 23 in. equipment, this floor mounted unit is particularly well suited for networking and data transmission applications.
FEATURES
Range of heights from 4 ft. to 9 ft. (24U to 58U) to match capacity requirements; 19 in. Rack Packages are 7 ft. high
Side rails are tapped on both sides with 12-24UNC threads for quick installation
EIA Universal 5/8 in. - 5/8 in. - 1/2 in. vertical mounting hole pattern matches industry standards
RU markings on both front and back of uprights make it easier to mount equipment
Packed unassembled in individual cartons; assembly hardware (including twenty 12-24 mounting screws) is furnished for convenient storage and installation
Can be shipped via FedEx or UPS
Convenient rack and cable manager packages offered with either one or two 6 in. cable managers
Each cable manager in the package includes a two-piece
snap-on cover
Packages are available in black or mill finish
CONSTRUCTION
Frame is a strong and lightweight aluminum (6063-T6 alloy) extrusion with RU markings on both front and back of uprights
FINISH
RAL 9005 black polyester powder paint or milled aluminum
INDUSTRY STANDARDS
UL 1863 listed, File No. E230874
cUL CSA22.2 No. 182.4, File No. E230874
EIA 310-D
|
|
one cabling solution for your equipment
- Ten sizes of cable ducting plus associated accessories.
- Optimal ducting sizes for maximum cabling capacity.
- Simplified installation:
- snap-off tongues for cable entry,
- 4 types of fixing accessories to suit the application: screw, clip-in, door mounting and chassis mounting.
- Important: no metal component parts enter the inside of the trunking, thus maintaining electrical insulation.
|
|
|
Two frames with different stability but identical outer appearance. Two colour combinations for immediate selection on ServicePLUS. Large variety of versions and dimensions (up to 1200 mm depth). Unique profile with many assembly possibilities and new ways for cable management.
|
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
- dismountable aluminium cabinet frame
- passively ventilated viewing doors (side
perforations) with turning lever lock
- rear door with fitted perforated panel
(48% perforation) with turning lever lock
- two asymmetrically split side walls with
sash fastener locking mechanism
- two 19" levels depth adjustable assembly
options for the integrated
19" parts (see top view cabinet frame
page 2.3 "Technical information")
- 3-part bottom plate- closed
- closed top plate
- base with tilt prevention D=1150 mm
- earthing set 2.5 mm2, mounted
- 19" screw set M5, 50 pcs
Delivery:
fully assembled, base included
(with H=2000 mm)
|
|
|
RapidNet is a patented, high performance, pre-terminated system that utilizes a proprietary bundled cable cut to customer specified lengths. Combined with our patented cassettes, which protect the terminations, installation is a snap - literally. The cassettes snap easily into the RapidNet modular panel which fits into a standard 19" rack. RapidNet, manufactured in a stringent, quality controlled environment, arrives pre-labeled and pre-tested which contributes to higher quality and lower installation times. Because it can be installed so quickly and carries a high degree of performance and reliability, RapidNet is the ideal solution for mission critical data centers, temporary networks, and disaster recovery planning.
|
|
|
HellermannTyton’s rack mount fiber enclosures are the ideal direct termination and splice solution of LAN applications capable of supporting up to 192 fibers. While offering easy-to-use front slide-out trays for easy access to connections, enclosures are equipped with cable management and cable routing accessories to limit bend radius and add strain relief control. HellermannTyton’s Rack Mount Fiber Enclosures easily fit into 19” or 23” racks.
|
|
europacPRO
- 19 subrack
- With high flexibility
- EMC shielding can be retrofitted
- Fully IEEE 1101.1 compatible
europac integral
- Subrack with integrated functions
- Simple assembly
- Cost effective alternative for high quantities
multipacPRO
- 19" chassis for horizontal board installation and non-standardized components
- Versions in aluminium or sheet steel
inpac
- 19" chassis with high mechanical stability
- Modular design for standardised board formats
- Front and rear frame Al die cast frame Al die cast
|
|
Dimensions acc. to IEC 60297 or IEEE 1101.1, Aluminum or sheet steel versions, up to superior EMC level. Large selection of assembly options.
|
|
- high-quality design
- aluminium circular extrusions
- colour specified by customer
- Symmetrical
- all pieces can be mounted on all sides (4 doors possible)
- all parts mounted on the aluminium extrusions can be installed
on the front and sides
- Installation advantages
- side panels can be plugged into place and locked with a
sash fastener
- sliding roof and floor pieces for cable entry with integrated
tension relief
- 19" mount, adjustable mounting depth (right and left)
- can be dismantled
- high stability
- 19" and metric system solutions
|
|
|
|
|
|
PROLINE Voice and Data Cabinet
APPLICATION
This pre-assembled package meets all of the most common voice and data requirements and is available in two colors and five sizes.
Optional PROLINE components and DataCom accessories may be added to your original package or ordered separately.
FEATURES
Mounting channels (4) provide infinite front to back adjustment of rack angles
Rack angles are coated with black polyester powder paint
Front acrylic window door with key lock offers unobstructed visibility
Fully louvered rear door provides excellent ventilation, keeping equipment cool and extending its life
Quick release latches on side panels provide easy service access
Fan ready top with two cable entry ports for easy access and service
Open base for easy access and service
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
CONSTRUCTION
Fully welded heavy gauge steel frame
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
Both front and rear doors have lockable handles
Mounting hardware (20 10-32 screws) is included
FINISH
Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service.
INDUSTRY STANDARDS
EIA 310-D
LOAD RATING
Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman.
|
|
A complete offer of chassis will cover all needs:
Industrial Rack Mount Chassis 4, 8, 14 or 20 slots with different combinations ISA/PCI.
Industrial Rack Mount Chassis with different height: 1U, 2U, 4U, 5U, 6U or 8U. Available with LCD screen
POwer supply 150W in 500W AT / ATX / AT-
Function PFC - verbose power supply- Power supply " hot-swappable ",... Chassis with tolerance of breakdown,control of machines, control of temperature, indicators of states in front panel, management of aeration,...
|
|
|
The KM6 family of subracks has evolved over many years as the demands of the electronics industry have changed with advances in technology. It sets the standard against which other systems are measured: the KM6 range offers an unrivalled combination of strength, versatility and configurability at cost-effective prices: additional features such as RFI protection, shock and vibration protection can easily be specified. Whether used to house equipment meeting the requirements of open architecture bus structures such as CompactPCI or VMEbus or for broadcast, medical, test or general purpose applications, one of the three main variants of KM6, supported by a huge and comprehensive range of accessories, will fit the bill. All relevant international specifications are met.
|
|
Vitaro 195
ZENITH 160
BERLIN 150
apra Line 140
Tamago 185
apraTek 180
19" enclosure system 179
|
|
3 U subrack 245
6 U subrack 245
2 U subrack 245
4 U subrack 245
7 U subrack 245
Individual Configuration 245
3 U subrack 270/271
|
|
- 4U 19'' Rackmount Industrial Chassis for IPC or Mainboard :
- Rugged design constructed in 1.2mm Heavy duty steel and
it's a cost effective solution
- One 12cm lntake cooling for excellent cooling cycle and
comes with washable air filter
- Design for various industrial computer for networking,
communication applications and related solutions
|
|
|
|
|
|
PERMANENT PROTECTION for workstations with a 14"
to 17" screen, data capture tray and keyboard.
DESCRIPTION:
- Sides in 10mm-thick composite material, self-coloured (white), complying
with hygiene standards in force
- Thermoformed monobox structure (rounded edges)
- Smooth surface for easy cleaning and to prevent accumulation of dirt
- Model also available for LCD screen: AGRO EC LCD
- Self-supporting structure for optional wall mounting
- Sloping top
- Sealed to IP 65
- Fire rating M1 self-extinguishing
FEATURES:
SCREEN COMPARTMENT
- Front protected by opening panel in 6mm-thick transparent, colourless
acrylic glass
- Sealed with compression bolts and peripheral joints in the housing,
in stained wood
- Closure with two compression bolts
KEYBOARD COMPARTMENT
- Independent of the screen compartment
- Compartment with white foldaway polyethylene tray with two runners
in the same material, and safety stops
- Thermoplastic hatch (10mm thick) sealing the compartment
- Cable sleeve for link between the two compartments
|
|
Driver Bays 2 x 5.25ff Bay, 2 x 3.5ff Bay
System Control Power Switch button, Reset button, Keyboard-Lock button
System Cooling Fan 1 x cooling fan(optional)
Power Supply Support ATX/PS/2 Power supply
Vibration 0.5g rms/5`500Hz/random operation
EMC CE/FCC Class B
Construction 1.2mm galvanized Heavy duty steel
Operating Temperature 0`50
Operation Humidity 5%`95%, 40, no condensing
Dimensions 482mm ~ 450mm ~ 177mm (W~D~H)
|
|
The new dimension at the interface between man and machine for enhanced
- workspace
- safety
- ergonomics.
Industrial Workstations are more than just combinations of individual components. Individual customer requirements are achieved cost-effectively and to perfection.
Examples include compact solutions for scanner or laboratory workstations, individual worktops, combinations with the AP console system or Command Panel - there are virtually no limits to your creativity.
The concept is convincing because it is so simple: IW modules are equipped with climate control and electronic components, centralised security controlling, plus an extensive range of accessories, for a complete solution.
Perfect solutions from a single source. We develop and manufacture according to the principles of ergonomics and safety engineering.
|
|
|
The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control.
|
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Crash Cart Enclosures. The modularity of the DYNICS Crash Cart will allow you to essentially build your own "custom" box. Once the enclosure is specified with the Crash Cart Configurator, DYNICS will develop a drawing and then send for your approval ensuring that the appropriate solution has been created. Some of the Crash Cart features include:
- Painted Steel OR Stainless Steel Construction
- Rugged Modular Construction
- Configurable Cable Connections
- Gasketed Doors and Openings
- Lockable Front Doors and Keyboard Tray
- Swivel Touchscreen Display
- Non-Marking Caster Wheels
|
|
|
|
