|
|
Manlight proposes a wide variety of Erbium (1,5µm) or Ytterbium (1µm) doped fiber amplifiers either using PM or non PM fiber.
Available in OEM module of different sizes depending on the power (with power up to 35dBm at 1,5µm and up to 43dBm at 1µm) as such as in benchtop 3U 1/2 19" (up to 40dBm at 1,5µm) or 3U 19" (up to 43dBm at 1µm), you will necessary find the product that you need for your application.
|
|
Main Features & Applications:
- 1529-1563 nm Bandwidth
- Fast Transient Gain Control Up to 12 dB
- Up to 12dB Mid-Stage Loss budget
- Compact Package
- Variable Gain
- Excellent Flatness APC, AGC, ACC modes
- For: Long-Haul and Ultra Long-Haul Applications
|
|
|
The EFA-series of benchtop EDFAs are repackagedversions of the high-performance optical amplifiers found in MPB's repeaterless-link telecom equipment. These wall-plug units include preamplifiers with high gain and near-quantum-limited noise figure, as well as power amplifier models with saturated output powers up to 23 dBm.
|
|
The Manlight High Power Amplifier for CATV and FTTx applications
offers a cost effective solution in bringing the bandwidth closer to the end users. With a unique design based on Manlights in-house pump combiner and optical know-how, the high power amplifiers are optimized to offer high power and low noise figure with proven reliability and quality. The output power can be distributed
between 1 to 16 output ports.
The use of efficient and reliable uncooled pump diodes allows the Manlight amplifiers to reach high output powers with low overall power consumption. The control electronics featuring alarms, automatic
shutdown, and RS-232 communication interface is driven by a 5 / 24 VDC power supply.
|
|
BaySpec's IntelliGain® and IntelliSense® Erbium-doped Fiber Amplifiers (EDFA) are designed and manufactured in the U.S.A. to meet stringent Telcordia GR-1312 requirements for reliability and performance.
A compete line of EDFA gain modules are available, designed to meet various amplification requirements for single-channel, narrowband, and DWDM transmission in metro, long-haul and ultra long-haul networks.
Features:
- Output power from 10 to 26 dBm
- Fast transient response
- Gain flatness
- Very low noise figure
- Variable gain
- Mid-stage access
- Selection of industry standard packages
- Ultra low power consumption
|
|
| ... products without technical information |
| |
|
The DSP Lock-In Amplifier provide high performance at a reasonable cost. The SR830 simultaneously displays the magnitude and phase of a signal, while the SR810 displays magnitude only. Both instruments use digital signal processing (DSP) to replace the demodulators, output filters, and amplifiers found in conventional lock-ins. The SR810 and SR830 provide uncompromised performance with an operating range of 1 mHz to 102 kHz and 100 dB of drift-free dynamic reserve.
|
|
|
The widest bandwidth lock-in amplifier available. It provides uncompromised performance with a frequency range of 25 kHz to 200 MHz and up to 80 dB of drift-free dynamic reserve. The SR844 includes the many features, ease of operation, and programmability that you've come to expect from SRS DSP lock-in amplifiers
|
|
BROADBAND AMPLIFIER
10 - 3000 MHz, 20 dB Gain, 13 dBm P1dB
Product ID: PE1513
FREQUENCY RANGE: 10 MHZ TO 3 GHz
GAIN: 14 dB (Min)
NOISE FIGURE: 2.7 dB (Min)
OUTPUT P1dB: 9 dBm (Min)
OPERATING VOLTAGE: 9 TO 15 VDC
|
|
Our fully digital 20 MHz Lock-In amplifier is an optimal extension to our AFM systems. It is specially optimized for electrical AFM measurements and provides nth harmonic detection and an integrated feedback loop for kelvin probe force (KFPM) measurements and many other features. It can of course also be used for other applications, independent of an AFM system.
This device also acts as a digital storage oscilloscope. It is controlled via a small java front end running on a PC. The connection between the amplifier and the front end is made via ethernet which results in extremely fast update rates for the displayed oscilloscope data. The front end runs on all standard operating systems where a Java runtime environment can be installed (e.g. Windows / MAC / Linux).
|
|
Product Description:
Utilizing state-of-the-art digital signal processing (DSP) techniques, the OL 730D delivers outstanding performance in all applications requiring lock-in amplification techniques. It features several modes of operation depending on the type of amplification desired, is completely microprocessor controlled and can be programmed to read directly in any radiometric or photometric optical quantity. Though designed primarily for use with optical radiation detectors, the OL 730D is a highly versatile instrument that can replace many types of amplifiers in one compact, easy-to-use unit.
Application Type:
Luminous flux, radiant flux (power), transmittance, luminance, radiance, luminous intensity, illuminance, irradiance, radiant intensity
|
|
|
Power amplifiers are a must in applications requiring both complex signals as well as high voltage throughput. Such a combination is rare in high performance instrumentation and therefore external amplification devices must be used to achieve this task. The Tabor line of wideband amplifiers was designed to operate in conjunction with its series of waveform generators thus providing the ultimate solution for high-voltage, wideband applications.
|
|
| ... products without technical information |
| |
Features
* Improved rejection for Bluetooth/GPS operation
* Usable bandwidth of 25 MHz (each band)
* No matching required for operation at 50O
* Hermetic Ceramic Surface Mount Package (SMP)
* High Tx-Rx isolation
* RoHS compliant (2002/95/EC), Pb-free
Typical Applications
* For CDMA and WCDMA applications
|
|
| ... products without technical information |
| |
Multi channel charge amplifier and thermocouple amplifier in an industrial housing. Consult data sheet for selecting the appropriate charge amplifier.
Applications
Integration into injection molding maschines for connecting piezoelectric cavity pressure sensors and temperature sensors for visualization and control.
|
|
| ... products without technical information |
| |
The Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch, and check valve, and supplies smooth flow from tricke to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.
Features::
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
| ... products without technical information |
| |
|
The BOGE Booster Compressor takes in pre-compressed and pre-treated compressed air from an existing network or from a low-pressure compressor and compresses it to the required final pressure.
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
|