|
|
Manlight proposes a wide variety of Erbium (1,5µm) or Ytterbium (1µm) doped fiber amplifiers either using PM or non PM fiber.
Available in OEM module of different sizes depending on the power (with power up to 35dBm at 1,5µm and up to 43dBm at 1µm) as such as in benchtop 3U 1/2 19" (up to 40dBm at 1,5µm) or 3U 19" (up to 43dBm at 1µm), you will necessary find the product that you need for your application.
|
|
Main Features & Applications:
- 1529-1563 nm Bandwidth
- Fast Transient Gain Control Up to 12 dB
- Up to 12dB Mid-Stage Loss budget
- Compact Package
- Variable Gain
- Excellent Flatness APC, AGC, ACC modes
- For: Long-Haul and Ultra Long-Haul Applications
|
|
|
The EFA-series of benchtop EDFAs are repackagedversions of the high-performance optical amplifiers found in MPB's repeaterless-link telecom equipment. These wall-plug units include preamplifiers with high gain and near-quantum-limited noise figure, as well as power amplifier models with saturated output powers up to 23 dBm.
|
|
The Manlight High Power Amplifier for CATV and FTTx applications
offers a cost effective solution in bringing the bandwidth closer to the end users. With a unique design based on Manlights in-house pump combiner and optical know-how, the high power amplifiers are optimized to offer high power and low noise figure with proven reliability and quality. The output power can be distributed
between 1 to 16 output ports.
The use of efficient and reliable uncooled pump diodes allows the Manlight amplifiers to reach high output powers with low overall power consumption. The control electronics featuring alarms, automatic
shutdown, and RS-232 communication interface is driven by a 5 / 24 VDC power supply.
|
|
BaySpec's IntelliGain® and IntelliSense® Erbium-doped Fiber Amplifiers (EDFA) are designed and manufactured in the U.S.A. to meet stringent Telcordia GR-1312 requirements for reliability and performance.
A compete line of EDFA gain modules are available, designed to meet various amplification requirements for single-channel, narrowband, and DWDM transmission in metro, long-haul and ultra long-haul networks.
Features:
- Output power from 10 to 26 dBm
- Fast transient response
- Gain flatness
- Very low noise figure
- Variable gain
- Mid-stage access
- Selection of industry standard packages
- Ultra low power consumption
|
|
Optical Transceivers
Avago Technologies portfolio of optical transceivers include ATM/SONET, Ethernet, Storage, Parallel and WDM Transceivers.
Avago offers a broad portfolio from 10G parallel optics, Infiniband, parallel optic modules, pluggable optics, to QSFP, SFP+ and RoHS compliant transceivers
|
|
General description
The ZL60301 is a very high-speed transceiver for parallel fiber applications. This transceiver performs E/O and O/E conversions for data transmission over multimode fiber ribbon. The transmit section converts parallel electrical input signals via a laser driver and a VCSEL array into parallel optical output signals at a wavelength of 850 nm. The receive section converts parallel optical input signals via a PIN photodiode array and a transimpedance and limiting amplifier, into electrical output signals.
The module is fitted with a pluggable industry-standard MegArray® BGA connector. This provides ease of assembly on the host board and enables provisioning of bandwidth on demand.
|
|
| ... products without technical information |
| |
The Fiber Optic pH Sensor system consists of a fiber optic probe designed to hold immobilized colorimetric indicator dye materials, plus a light source, spectrometer and OOISensors Software. You can supply your own indicator material, or select from our line of transparent or reflective films. Calibration involves recording spectra in high and low pH samples, and in at least one pH standard such as a NIST-traceable buffer.
|
|
Optex FA Fiber Sensor BRF series
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of water and moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
- Cross talk prevention, IP66 protection
- 10 turn potentiometer for easy and fine adjustment
|
|
Optex FA Digital Fiber sensor D2RF series
- Digital display for easy setup and easy monitoring
- Two independent output with
- High speed 60 micro second response.
- Cross talk prevention up to 4 units
- APC Function (Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions.
|
|
|
The MTI-2100 Fotonic Sensor is a high-resoulution fiber optic based vibration/displacement sensor with extremely high frequency response. The system offers a bandwidth up to 500 kHz and resolution to 0.01 microinch (2.5 Angstrom).
|
|
|
|
|
|
Light barriers for optical fiber adaption
FL 70 R-..D
Informative display
The FL 70 R-..D is the high-end sensor for fibre optics with a 4 digit display.It is characterised by simple settings and many additional functions, e.g. fine adjustment of the switch point, inversion of the switch output, adjustment of accuracy and speed, window programming, time functions and tamperproof protection. The display is always clearly visible thanks to a 180° rotatable screen.
FL 70 RA-..D
Analogue output
The FL 70 RA-..D has an analogue output, which is of particular advantage for complex applications such as the connection of a socalled cross-section transformer. This enables e.g. checks with regard to object size and automatic edge control.
FL 70 R
The FL 70 R version operates without a display and is a cheap alternative for standard applications. An easy teach-in function is common to all of the sensor versions. Teach-in is carried out at the touch of a key and external teach-in is possible via a teach cable. The keys can also be locked.
Product advantages
» High user comfort – Teach-in
» High level of accuracy
» High switching frequency
» No mutual interference thanks to automatic communication
» Mode of operation selectable (types R-..D and RA-..D)
» Assembly on DIN rails
» Robust IP 64 protection system
» Top quality price/performance ratio
|
|
|
Fiber Optic sensors, photo lens eliminated amplifier combined with fiber optic cable, are ideal where small objects detection and quick response time is required. Moreover, the high flexibility of the optic cable allows easy installation fitting almost anywhere. Autonics fiber optic sensing amplifiers and cables of real compact body offer sophisticated part detection, quick response time and generous sensing range.
|
|
Dual digital display unit and the highest powered amplifier on the market. Monitor 2 features with one unit.
Over 80 sensor heads are available for the FS-V20 with applications in a wide range of industries.
|
|
|
|
|
|
FX-100 - top price-performance ratio powered by technological innovation
New possibilities with digital fibre sensors. SUNX has developed a new top price fibre sensor. The quick set mode allows inexperienced operators to use the sensor quickly. For experienced operators, the setting and PRO mode are still available. Other features, such as the ECO mode, copy and GETA function, enhance its practicality in the workplace. A total product range of 12 types will be available for all customers’ requirements.
Characteristics:
One 4-digit green, one 4-digit red LCD display
Copy settings via wiring as with DP-100
3-step setting hierarchy, from basic to advanced
External input for external adjustment
No need to connect amplifiers in case interference prevention is requested
Direct installation possible without bracket or DIN rail
Commercially available connector simplifies procurement
Key-lock function
Teaching, light-ON / dark-ON setting
Threshold values can automatically adjust to changes in incident light
Intensity of emitted light can be reduced automatically to ensure stable sensing
Accessories:
Various cable lengths: 1, 2, 3, 5m
End plates
Protection cover
|
|
MICRONOR optical products are based 100% on fiber optics. We make use of light in an innovative and elegant way to fulfill complex sensing requirements. These new sensors show themselves to be particularly advantageous and reliable under extremely tough and difficult environmental conditions. Areas of application such as in deep-drilling sites, wind generators, railway rolling stock, nuclear plants, aircraft braking systems and steelworks are where these products come into their own.
We offer two encoder versions and the appropriate analysis appliance:
|
|
General description :
Panasonic Electric Works Corporation of America is proud to introduce the brand new FX-100 Series from SUNX. Its ultra-slim design features a 9mm width and integrated mounting holes for installation in any application. The four chemical, visible red LED used for the emitter ensures long life operation and high-powered sensing.
This sensor incorporates a dual digital display for simple setup, along with automatic push-button teaching and external input capabilities. Advanced functions including threshold tracking, timers, LED attenuation, and interference prevention allow the FX-100 to compete with fiber optic units that are twice its price.
The connection options for the FX-100 series consist of an industry standard M8 quick disconnect along with an option that utilizes the same quick connect cable found in the SUNX DP-100 and PM series.
With list pricing starting at $75, the FX-100 series is primed to become the gold standard in fiber optic sensors.
|
|
|
|
|
|
SPECTRO-3 Series - Color Sensors "True Color"
Human vision and recognition - but a thousand times faster
With the SPECTRO-3 series there now is a family of color sensors that has been specifically designed for "true-color" detection ("human color reception") and high switching frequency. The sensors can be operated both in AC and in DC mode, with integrated or external light source. With the included SPECTRO3-Scope software illumination can also be turned off with a simple mouse-click, which then also allows the color and brightness inspection of self-luminous objects such as LEDs, automobile tail lights, halogen lamps, or fluorescent lamps. Up to 31 colors can be provided through the 5 digital outputs, the maximum switching frequency is 30 kHz.
Apart from a super-bright white-light source, a high-performance UV light source also is available, which allows a color and brightness differentiation of fluorescent colors without any problems. Different optical frontends make it possible to implement operating distances of almost 0 mm up to 500 mm, with detection areas of Ø 0.5 mm to approx. Ø 100 mm. The use of an optical fibre version allows applications in Ex areas.
In combination with a reflected-light optical fiber and a neutral-absorber attachment unit the SPECTRO-3-FIO (version for use with fiber optics) makes it possible to perform a color inspection of different self-luminous objects.
|
|
Referenos: AF CLARYS 2, 3, 4
Sensing distance with plastic fibre or glass fibre: see "Plaslic Optical Fibres' or "Glass Optcal Rbres
High resolution up to 5100th mm
2, 3, 4 channels + logical output AND/OR
Modeb: output P, output N
Optional: Analogical output
Smpfe feactvin: 1 or 2 thresholds
Timer OWOFF delay: 0 to 10s
Dimensions: 99x45x325 mm
Resolution 5/100th mm with 2000 points
Applications:
Level controls: high and bw
High precision detection of movement
Presence cdetection, up to 4 units simultaneously
Up to 4 beams barrier
Mark detection
|
|
|
|
|
|
These electronic devices, photoelectric sensors or photocells, use the light emission principle combined with the electronic and are made up
of an emitter or luminous source, the light rays of which are detected by a receiver. The variation in luminous signal, obtained when interrupting this ray, is converted into an electrical signal and is measured and used by
an electrical circuit. The light used is either infrared or red. By making use of this light various type of photoelectric sensors can be made. The AECO photoelectric sensors available in the FOTOSTAR range are the FT18M - FT18 -FTQ series in direct reflection, with reflector with polarized light and emitter-receiver versions. Due to their flexibility regarding the various
standard programmable versions these products offer the possibility of stocking reduction and are easily interchangeable with most of the units available on the market. They are used in the field of automation to check for the presence, counting, position control, etc., and they
are compatible with most logic programmers.
|
|
|
Plastic fiber optic cabel with outside diameters of 1 mm and 2.2 mm can be connected to this sensor. The easy to use Teach-In function allows for fine sensor adjustment, so that even transparent objects can be reliably recognized in barrier mode operation. Scanning width is automatically adapted to each individual application via external Teach-In. The devices can be easily mounted to standard DIN rails.
|
|
|
|
see the results for the following category : 
