|
|
|
|
|
|
Wireless Remote I/O - Cable Replacement
Banner introduced a new product line called SureCross Wireless I/O.
The DX70 is point to point architecture based on a pair of emitter/receiver. Digital or analogue I/Os are directly linked based on the internal terminal chamber identification. Unlimited pairs can work together in the same area without any interference.
The DX80 is a point to multipoint with up to 56 Nodes linked to one Gateway. The possible high number of I/Os can be transferred to supervision by communication with Modbus RTU (RS485), EtherNet/IP or Modbus TCP. Some Nodes can be powered by 24 Vdc, battery box or solar panel with rechargeable battery. Special DX99 Nodes come with ATEX certification Zone 0 for gas.
The DataRadio DX80DR2M is used mainly for serial (RS232 or RS485) cable replacement. This can be configured with one master and numerous slaves.
SureCross products fit with many different types of Industries (Factory and Process Automation, Water Treatment...). The high performance, reliability and low cost of this product makes it a natural solution for renovation/revamping of existing installations.
Main features include:
Rugged industrial housing giving an IP67 rating
Reliable and secure data communication with FHSS
Accept up to 12 different analogue or digital signals on one module
Up to 56 Nodes per Gateway with extended address mode
Line of sight maximum distance of 3 Km between Node and Gateway
Built-in signal strength visualisation
Link loss output indicates communication status
Specific FlexSensors adapted for a longer lifetime when using a battery
Frequency band of 2,4 GHz and 900 MHz depending on country
|
|
Multi I/O Units
Typical Applications:
Wireless "junction-box" in a process plant to connect a large number of I/O points to other parts of the plant and to the plant control-center.
Simple RTU in a SCADA system, connecting I/O points in pump stations, sub-stations, pipeline regulator stations etc.
Machine-2-machine wireless connectivity in factories.
Features:
- Monitoring and control by wireless or twisted-pair wire
- Sensor signals connected at one module (input signals) are transmitted to another module where the signals are recreated as output signals, or passed via serial or Ethernet data bus to a host device such as a PLC or SCADA system.
- Short distance and long distance applications
- Four I/O versions available
- I/O expansion via RS485 multi-drop serial to I/O modules.
|
|
|
|
|
|
|
The TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switches to Rotating Machine Components. The Starter Kit is designed to showcase the capabilities of the TempTrackr™ Multipoint System. Each Kit includes three batteryless wireless temperature sensors that are capable of reading temperatures between 0°C and 120°C. The three sensors provide the ability to monitor temperature at multiple points of interest. The Surface Acoustic Wave (SAW) resonator within each sensor is powered by bursts of electromagnetic radiation emitted by a wireless reader (also known as a wireless interrogation unit). A feedback signal, conditioned by the temperature to which the resonator is exposed, is then electromagnetically transmitted to the wireless reader where it is processed for temperature measurement. The TempTrackr™ Multipoint System is capable of tracking up to six sensors and can provide temperature data via the CAN communication protocol. The number of sensors can be extended to 12 by making use of multiple interrogation antennae. The Starter Kit is an ideal technology evaluation tool3. SenGenuity will work closely with you to adapt the TempTrackr™ Multipoint System to meet the specific needs and requirements of your application.
|
|
High speed Data transceiver/ data radio/ FC-222
Technical specification:
Frequency band: VHF/UHF, default band: 220MHz
Modulation : 3FSK
Channel spacing 5KHz12.5KHz18.75KHz and 25KHz optional.
Three interface RS-232,RS-485 and TTL optional.
RF Data Rate: 1200bps,2400bps,4800bps,9600bps,19200bps optional.
Power supply :+10.5V +15.0V,Nominal voltage +13.8V
Standby current :¡Ü80MA
RX current :¡Ü100 MA
TX current :¡Ü1.6A
Operating temperature : -40+85
Channel spacing :5KHZ
Modulation : 3FSK
RF output power :5.5W¡À0.5W
Frequency deviation :¡À500HZ
RX sensitivity : ¡Ü-118dBm1200bps.
|
|
Data Transceiver /RF Radio FC-221AG
1) Comply with FCC&CE
2) PLL & TCXO
3) 25KHz /12.5KHz channel spacing
4) 19.2kpbs RF data rate
Application:
Wireless AMR system;
Wireless data collection;
Industrial control and telemetry;
Wireless queuing system;
wireless weighting scales;
Security monitor and alarm;
LED sign automatic display;
Specification :
1) Frequency band: 433MHz(default),868MHz,915MHz
2) 3FSK
3) Channel: 8, customized for more channels.
4) RF Power: <50mW
5) Receiver sensitivity: -118dBm@1200bps,-115dBm@2400bps
6) Transmit current:<45mA/TTL,<51mA/RS485,<52mA/RS232
7) Receive current:<30mA/TTL,<35mA/RS485,<35mA/RS232
8) Sleep current: 25uA
9) Cgannel spacing:25kHz
10) Interface: UART/TTL,RS-232,RS-485,Baud rate: 1200-19200bps.
11) RF data rate: 1200-19200bps
12) Power Supply: 5.0±0.5V DC(customzide for 12V)
13) Temperature: -30°C ~ 80°C
14 )Size:40mmx27mmx6mm
15) Weight: 10g
|
|
|
|
|
|
The widespread use of cellular phones and wireless network applications inside buildings has increased the need for antenna systems that can provide considerable gain over traditional dipole antennas.
Laird Technologies' In-building, Access Point (AP), and Client wireless antennas are particularly applicable in environments where aesthetics and wide angle coverage are necessary for successful wireless deployment. Their surprisingly small size allow the antennas to be hidden almost anywhere, providing an invisible solution for most applications.
These antennas are designed and optimized for special WLAN system requirements, with patterns that are uniform, well controlled, repeatable and predictable. Manufacturing is very consistent so each antenna performs as expected every time, and special beamshaping is implemented to enhance performance in indoor environments. Spatial and polarization antennas reduce the effect of multipath (reflections), with multi- and wide-band antennas available.
|
|
Net-Bee is a simple, but powerful controller for home or industrial wireless applications. The Net- Bee controller gives designers 2.4GHz ZigBee connectivity in a low-cost, high-performance single-board, rich with digital/analog I/O's, large data memory that designers need for embedded control and monitoring applications. Design your applications with an integrated BASIC, PASCAL or C compiler designed specifically for Net-Bee Wireless Controller.
Features:
- Small Size: 95x60x15mm.
- Microchip PIC16F88 controller at 8MHz.
- 8KB Flash for user memory applications.
- 32kB of EEPROM Memory.
- 2.4 GHz ZigBee RF Module.
- Free space range approx 300m for Net-Bee and 1km for Net-Bee Pro.
- Internal antenna for Net-Bee.
- Antenna connector for Net-Bee Pro.
- 4 Protected Digital Inputs.
- 4 10-bit Analog Inputs.
- SPDT Relay Output.
- USB communication - Optional.
- Real Time Clock backup.
- Normal and Sleep Mode operation.
|
|
|
TO-PASS, a complete telecontrol solution offered by WAGO consisting of stand-alone fault detectors with GSM connection, optional IP66 protection and a telecontrol PLC that can be linked to the WAGO-I/O-SYSTEM. This enables widely branched systems to be acquired in the same manner as remote stations. A GPS version is even available for locating vehicles using satellite signals. An Internet server with MySQL database rounds out the system features.
|
|
|
SATELLINK products makes constructing your wireless communication applications easier than ever. The first product in the SATELLINK line, SATEL I-LINK 100, is designed for transparent transfer of contact information or analogue signals from one location to another together with the SATELLINE radio modems.
|
|
|
Wireless I/Os are the solution for applications where cables are not suitable to be used, such as cranes, AGVs and robots. In those cases wireless I/Os are used to transfer status and control information.
|
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included
|
|
The Radio Printer is part of a wireless system for temperature monitoring and control. It is made up by one or more temperature sensor-transmitters, like the TempStick Radio, and a radio receiver, the Radio Printer itself. It has everything it needs to work and doesn't require any PC or software : the display allows to configure the acquisitions and the printer to store easily and quickly all the stored data.
- no need of a PC nor software;
- graphic and alphanumerical LCD display;
- LED and sound alarms for thresholds set by the operator;
- display values for each sensor and all data recorded;
- rechargeable batteries and external power supply.
Applications:
stock houses and warehouses monitoring;
fridges and fridge cells monitoring;
environment monitoring;
computer rooms control;
laboratories monitoring;
transport monitoring;
catering services;
HACCP compliance temperature monitoring;
ISO compliance temperature monitoring.
|
|
Smart Radio Modules
* Wireless Data Comms
* Onboard Encryption
* Smart Radio Prototcol
* Ideal for Rapid and Reliable System Design
|
|
|
|
|
|
AMC335
Intelligent Synchronous WAN Communications Module
HIGHLIGHTS:
* Multipurpose Intelligent WAN Communications Module for AdvancedTCA® and MicroTCA%u2122 Systems
* Mid-Size Single AMC Module
* Full Compliance with AMC.0 R2.0, AMC.1 R1.0, and AMC.2 R1.0 Specifications
* Four High-speed Channels Capable of Sustaining 2 Mbps per Port
* Freescale%u2122 MPC8270 PowerQUICC II%u2122 Processor
* 128 MB Dedicated Processor SDRAM Memory
- Handles Extensive Onboard Traffic and Protocol Requirements
* 32 MB Application Flash
* NexusWare® WAN Protocol Software:
- Radar Receiver
- TADIL-B
- HDLC
- X.25
- Frame Relay
- ASYNC
* NexusWare® CGL OS and Development Environment
* Broad Operating System Support Includes Solaris%u2122, Windows®, and Linux®
The use of AdvancedTCA® and MicroTCA%u2122 systems for the aerospace and defense markets, as well as for telecom OEMs, will require high-density, highly advanced I/O solutions for use in these new environments. As a long-time contributor to industry standards and emerging technologies, Performance Technologies provides a combination of powerful hardware and advanced software that enables its customers to fully leverage AdvancedTCA and MicroTCA capabilities for the creation of high-density, high-performance solutions.
The AMC335 Intelligent Synchronous WAN Communications module provides four high performance synchronous/serial channels for WAN connectivity. This module is ideally suited for use in creating flexible and efficient radar gateways, radar recorders, protocol convertors, serial gateways, and front-end I/O elements as well as many other high-speed communications devices that require RS232, RS422 (RS449/EIA530), and V.35 connectivity. The AMC335 is part of Performance Technologies' industry-leading family of AMC solutions that include compute, storage, and video supported by powerful enabling software for embedded applications.
|
|
ARF44 - Multi-channel transceiver with µC - 863/870MHz - 8mW
* Two-way digital link over 300 m
* 863-870MHz – multicanal- Wideband
* Module-Modem including a RF transceiver + µC + dedicated firmware
* On-board standard mode : Transparent
* Serial link: UART TTL
* Configuration and Set-up through Hayes commands
* Pin code
* Received signal strength indicator (RSSI)
* Consumer market, tertiary and industrial applications
o Short-distance communication
o Payment terminal
o Home applications
o Thermal regulation
o Traceability
o 'Consumer market' intercom
o Automotive
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product.
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77
|
|
|
|
|
|
455U-D Radio Modem (Serial Data)
Suitable for licensed channels world-wide (FCC and CE approvals) & license-free channels in Europe, Africa, Asia & Australia and New Zealand.
Typical Applications
Water and waste water - wireless links PLC's in a SCADA system. Electricity - wireless links to substation RTU's.
Accessing field data loggers units in oil & gas.
Features
- Licensed and License-free radio channels, 380 - 520 MHz, 10mW- 5 W, 12.5/20/25 KHz
- Wireless data rate up to 19.2 Kb/s (25kHz channels)
- Line-of-sight distance 30 - 100 km dependant on terrain and local radio regulations
- Diagnostics and Configuration via dedicated RS232 port with Remote access to all units via the wireless channel
- Military-grade security encryption - 128 bit AES
- Multiple device connectivity (MDC) - two independent serial applications in one modem
- Hot redundant standby functionality
Multiple operating modes
- OPR Functionality ... Optimum Path Routing for Modbus, DF1, Profibus and DNP3 networks, to ensure peak network communications efficiency
- Broadcast "multidrop" mode, configurable error-checking
- On-line and remote configuration by Windows software or Hayes AT commands
|
|
|
|
|
|
245U-E-G/A Wireless Ethernet Modem & Serial Device Server
Typical Applications
The 245U-E-G (2.4GHz, 400mW) provides 54Mbps, encrypted, repeatable, meshed Ethernet connectivity to link industrial process and automation applications.
NB: 245U-E-A will be released first quarter 2009.
Features
- Uses Global 2.4GHz ISM band
- 802.11 a, b, g (2.412 - 2.462GHz: 5.20 - 5.825GHz) option availability
- 54Mbps for large data transfer applications (1 - 54Mbps configurable)
- Configurable transmit power (15mW - 400mW) for superior radio range
- WDS (AP - AP) multi-hop repeater function to extend radio coverage
- Spanning Tree functionality enabling self healing of network
- Bridge /Router, Access Point /Client in one reducing inventory costs
- Serial client /server /multicast functionality (point-point; point-multipoint)
- Modbus TCP to Modbus RTU Gateway /Modbus Master for I/O transfer
- Hardware encryption ensuring no reduction in data throughput
- Security to WPA2 PSK /802.11i - 802.1x military grade encryption
- MAC address and IP filtering to reduce unnecessary network traffic
- Online diagnostics and configuration throughout the network.
|
|
605M-D1 GSM / GPRS Modem
Typical Applications
The ELPRO 605M-D1 is a quad-band GSM/GPRS modem that utitlises GSM/GPRS mobile networks to transmit and recieve data.
Teamed with the ELPRO 605M-R1 Router, the modem becomes a powerful, easily installed communication link between data loggers, PLC's, and other ELPRO products.
Features
- Quad-band GSM 850/900/1800/1900
- Supports the GSM standard AT command set
- GPRS class 10 device (carrier throughput up to 54.2 Kbps)
- On board SIM holder
- Embedded TCP/IP stack
- Easy to use configuration software
- Standard SMA antenna connector
- RS-232 serial interface
- Circuit switched data up to 14.4Kbps, V.110
- Embedded Python Interpretor
Easy configuration & Powerful diagnostics
- Easy to use configuration software
- Easily save config data on to HDD and upload to multiple units
- Built in terminal functionality
|
|
The Micro-Cell Module gives designers GSM/GPRS connectivity in a low-cost, high-performance single-board, it can be used as a standalone and powerful GPRS modem with its intrinsic TCP/IP stack. Its plug-and-play functionality and GPRS features make the Micro-Cell Module ideal for use in a wide range of M2M business fields, such as metering and remote maintenance, traffic systems, transportation and logistics, security, vending machines and facility management.
Features:
- Small Size: 82x66x32mm
- Low-Cost GSM/GPRS Modem.
- Dual Band EGSM 900/1800 MHz.
- Intrinsic TCP/IP protocol stack
- Data and SMS communications.
- RS232 serial communication.
- Up to 256kb of EEPROM Memory
|
|
For telemetry applications that do not have an adequate supply of electricity, the T-BOX line of low power and ultra-low power systems offers new capabilities for the remote monitoring of technical equipment.
T-BOX LP models can be powered by small lithium batteries or by a battery charged by solar panel, small wind generator, or any other external source. With unique standby/active algorithms for the processor, the T-BOX LP offers unrivalled operating performance on low power sources.
The system uses the infrastructure of the switched telephone network, GSM, or radio frequency, depending on the models and options.
|
|
Wireless M-Bus Radio Module
AMB8425-M
* Low-cost radio module 868 MHz
* Embedded Wireless M-Bus according to EN13757-4:2005 standard
* OMS (Open Metering System) - standard supported
* Range up to 700 m line of sight
* Small form factor: 16 x 27 x 3.5 mm
* Low-power functions (Wake-On-Radio)
* Easy switching between operating modes S1, S1m, S2, T1, T2, R2
* Operating modes S, T: 868.3 und 868.95 MHz and operating mode R: 868.03 MHz + k • 0.06 MHz k=[0,9]
* Adjustable RF data rates for S, T, R modes
* Communication/Configuration via UART/SPI Interface
* AES128 data encryption
* Conforms with EU R&TTE 1999/5/EC directive
* Available on Tape & Reel for SMD mounting
|
|
Bluetooth Module Class2
AMB2300 - BlueNicecom IV
* Bluetooth radio module (Class 2)
* Bluetooth 2.0 specification
* Digital AUDIO interface (PCM interface)
* Integrated profiles: SPP, GAP, SDAP
* Supported profiles: DUN, FAX, FTP, HSP, HFP, OPP, SYNC, BIP, BPP
* Small form factor
* Integrated chip antenna
* UART interface with programmable baud rate
* Quick-Start Evaluation Kit available
* EN 300 328 com
|
|
| ... products without technical information |
| |
|
|
