|
|
Landoll Corporation offers a model FL EX Explosion Proof Truck.
Four-wheel configuration - front wheel drive; rear wheel steering
High visibility mast, 2 or 3 stage
36 volt electrical system
Adjustable driver's seat
Safety seat switch, cuts power
Seat belts
4-wheel brakes - dual system
Automatic return- to-neutral
Independent hand and seat actuated parking brake
GE "SCR" controls
Quartz hour meter
Hydrostatic power steering
UL "EX" labeling
Designed for ANSI-UL 583, Type EX (Class 1, Division 1, Group D and
Class 2, Division 1, Group G)
Emergency power disconnect switch
Type N-150, 3-contact charging receptacle, Type EX
RFI suppressed to MIL-SDT-461 (Class 3 C)
EX rated motors
Static ground steer tires
Cushion rubber drive tires
Static ground straps
Brass clad forks and load backrest
Overhead guard
Fire extinguisher
Electric horn
Recessed rear tow pin
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. ** |
|
Capacity (kg): 2000 - 4000
Fork Length (mm): 1000/1200/1400
Load Center (mm): 500/600/700
The new AC electronic multidirectional lift truck "mini-lift" is designed for handling goods in narrow/limited inside spaces.
Silent and ecological, such truck is conceived with an electronic three-phase system.
Completely controlled by a computer on board by the use of can - bus technology, is equipped of two driving wheels and four steering wheels assuring a very good maneuvrability and enabling it to move in all directions. |
|
The SLT 30/40 is a very narrow aisle forklift truck that can increase your warehouse size by 50%. It enables you to be more efficient in product storage without adding on to your warehouse. Landoll Corporation also offers cold storage solutions.
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. Verry Narrow 64" Aisles versus Wide 144" Aisles = 12 warehouse rows vs 8 rows = 50% increase in storage. Landoll Corporation has been in business since 1963 offering Quality Products to Quality People** |
|
TMX 13/15s/15/18/20x
100 % AC 36/48V
Tri-Wheel Multi-Tire Lift Truck
TMX13 2,500 lbs 1300 kg
TMX 15S 3,000 lbs 1500 kg
TMX 15 3,000 lbs 1500 kg
TMX 18 3,500 lbs 1800 kg
TMX 20x 4,000 lbs 1815 kg
Features & Options:
100% AC System
Compact maneuverability allows tight turning radius for use in narrow aisles and confined areas
Non-polluting, quiet operation
Responsive, pre-reduction disc brakes
Hydrostatic power steering Variety of lights, alarms and other options are available
Applications:
Manufacturing, Bottling, Warehousing and Shipping |
|
| Based on a vision that focuses on your real-world challenges, the Crown RC 5500 Series offers best-in-class comfort and ergonomics, intelligent technology and practical innovations. It is designed to give the operator unmatched visibility, ultimate ergonomics and revolutionary ride control. The RC 5500 Series is a highly manoeuvrable and productive stand-up c/b truck which allows for easy driver entry and exit especially designed for applications where the operator is required to constantly be on and off the truck. |
|
ATF
Capacity: 1600, 1800, 2000kg
- Supercushion tyres
- Long and short wheel base options
- Yale AC technology
- Yalestop (electromagnetic brake) and auto regenerative braking
- Counter rotational drive wheels enable compact turning circles
- On board diagnostics
- Oil immersed brakes
- 4 pre-set performance settings
- 48 volt system |
|
| Toyota's 7FBEU Series 3-wheel electric elevates the idea of energy conservation to an entirely new level. Each subsystem is specifically designed to either conserve or regenerate power, maximizing productivity between battery charges. Furthermore, Toyota's Active Mast Control (AMC) system enhances lift truck load stability, assuring you that safety in your workplace comes first, with productivity coming in a very close second. Check out some of the features below to learn more about these great trucks |
|
Features:
- 3 Wheels construction, compact design, rear-wheel drive.
- Drive motor: Asynchronous motor 8.0kW, S2, 60 min rating
- Lift motor : Asynchronous motor 5,0kW, S2, 60min rating
- Service brake and hand brake enclosed in a pressure-proof housing. |
|
Offers excellent utilization of space. Pallets are often stored and retrieved more quickly than in conventional pallet racking, thanks to the design and method of working of the narrow-aisle trucks.
Cost-effective solution when the price per m2 is high or the available area limited.
Aisle width required 1.5 - 1.8 metres. |
|
ALF
Capacity: 2000, 2500, 3000, 3200kg
- Drop battery box design
- Supercushion tyres
- Yale AC technology
- 4 performance and extended shift settings
- 72 or 80V systems
- Oil immersed brakes
- Accutouch minilevers and PalmTech joystick available |
|
The Drive is the difference
Counterbalanced trucks are the workhorses of the industry, driven hard every day. Crown's range of counterbalanced trucks – two series of sit-down trucks and one stand-up version – are built to satisfy the demands of both the application and the operator. The SC 4200 is a highly maneuverable three-wheel design ideal for precision load placement in tight spaces. The FC 4500 is a higher capacity, attachment-friendly four-wheel forklift truck. The RC 5500 is a highly productive stand-up series which allows for easy driver entry and exit especially designed for applications where the operator is required to constantly be on and off the truck. |
|
FBC35-55N Series
Electric Counterbalance | 4 wheel %u2013 cushion tyres %u2013 48V
3.5 - 5.5 tonnes
With cushion tyres helping to minimise truck dimensions, and powered by a highly efficient 48 volt battery, these models are perfect for applications in which space is tight but extra strength and speed are needed.
FB10-15KRT PAC Series
Electric Counterbalance | 3 Wheel Pneumatic Tyres
24 Volt AC Power
1.0 - 1.5 tonnes
With its ultra-compact design and incredible manoeuvrability, the remarkable FBKRT PAC series is unbeatable in confined working areas such as narrow warehouse aisle and containers. Equipped with a 24 volt battery and efficient AC motors, it%u2019s the perfect choice if you need an economical but productive truck for a few hours each day.
|
|
Bring out the best in your operators. Give them more comfort and confidence with the new 4700 Series four-wheel electric lift trucks from Raymond.
Fits your operator and your operation
Packed with special features to boost operating efficiency, the 4700 Series is simple to learn and use, more maneuverable and more responsive than any truck in its class.
Controls have an intuitive, tactile, natural feel making operation easy and comfortable.
Raymond's exclusive ACR System™ helps lower costs through fewer parts and repairs, and increases productivity with better acceleration, and less downtime.
An open view mast and smooth hydraulics make load handling easier than ever.
Six preprogrammed performance speeds match individual applications and operator skill levels. |
|
Brand new GenEX
1985 was the most meaningful year for the world’s forklift industry since the development of the first forklift in 1917 by Clark. In 1985, Clark’s Genesis series’ customer oriented concept truck was more than an evolution in the industry, it became the standard for what is now a common sense design for every forklift truck.
20 years later, another meaningful evolution is to be realized by GenEX.
GenEX… more than standard.
Driving with remarkable acceleration, gradeability, and stability is always available with GenEX’s dual drive motors, which provide added traction, especially on wet or uneven surfaces. Each motors’ speed and direction is proportionally regulated by steer tire position, and along with a sharp-turn steer axle enables 110% perfect turning radius over any similar range trucks. Fully enclosed wet disc brakes also always provide constant brake performance even in humid, abrasive or corrosive environments., GenEX reacts precisely and dynamically to the operator’s lift and tilt requirements through its standard AC pump motor and controls. |
|
Linde E-forklifts - powerful with all-round capability
Linde counterbalance forklifts are renowned for good traction on all surfaces and excellent manoeuvrability, thus gaining a quicker turnaround. As with all Linde equipment, they set the standards for ergonomic comfort and efficiency.
The Linde advantages:
- performance
- flexibility and versatility
- high manoeuvrability
- superb operator comfort and ease of use
- reliability |
|
GO HIGH, REAL HIGH, WITH HYUNDAI
Ready for a good stretch? The Hyundai Forklift Trucks are rugged,
productive, lean-and-mean lifting machines.
Designed for the European market, it delivers optimum
productivity, reliability and comfort in a robust, user-friendly
package. The first thing you will notice is its simplicity:
nowhere will you find a machine that’s easier to operate.
Easy to maintain, and versatile in usage, it’s the field partner that
will never let you down.
Bigger cabin space ensures your easy and swift operation.
Join the winning team and feel the power, with the Hyundai
Forklift Trucks.
Prepare to go high, real high!
Electric Forklift Trucks :
HBF15T-5, HBF18T-5, HBF15-III, HBF18-III, HBF20-7, HBF25-7, HBF30-7, HBF32-7, HBF20H-7, HBF25H-7, HBF30H-7, HBF32-7 |
|
Toyota innovation and engineering come together to create a revolution in the electric forklift industry. The Toyota 7FB is the world%u2019s first electric forklift to combine the benefits of AC power with Toyota%u2019s exclusive System of Active Stability%u2122 (SAS). This system actually senses and counteracts instability to help reduce the risk of forklift tipovers. SAS combines with Toyota%u2019s reputation for quality, durability and dependability to raise standards for forklift safety and productivity.
3,000-5,000 lb. Lifting Capacity |
|
The MOFFETT M1 range, is now stronger than ever before! Thanks to the new 26 Hp Kubota engine complete with an inline pump, this replaces the existing 18Hp Kubota engine. The new M1 offers a newly improved ergonomic design as well as a range of features that can be tailored to meet your needs.
The M1 with a lift-capacity of 1500 Kg and the New M4 with a lift-capacity of 2000 Kg for this application, provides the solution to transferring loads upto 2000 Kg to hard to reach destinations, for example, city distribution. The M1 has the ability to work on paved surfaces and firm, off-road conditions like gravel and grass, where the M4 goes even further than that! Our innovative design means that all MOFFETT Forklifts can be carried on the rear of a truck or trailer with no loss of load space. There is no waiting for local off-loading equipment which means faster, safer and more cost effective deliveries. |
|
Ergo ATF
Stacking two-deep means that two pallets can be handled from the same side of an aisle. An idea which saves a lot of space.
The truck has telescopic forks. Can take all kinds of pallets. Driver standard as for the Rider Stacker models.
|
|
The Moffett M8, available in four different versions is able to work in the worst off-road conditions, it is the most advanced machine of its kind. Our MOFFETT M8 25.3 provides the solution to transferring loads up to 2,5 tons and helps you to reduce your annual transport costs.
The M8 25.3 is also available with Moffett's patented Lift Assist and one sided off-loading package, a combination which enables one man and one machine to load and unload from just one side of the truck or trailer. The use of this system allows the Moffett to operate at full load capacity thus minimising time on site and boosting productivity. |
|
Optimised Warehouse Solutions
When your warehousing challenges require more efficient use of space, equipment and labor, the Crown Turret Trucks deliver maximum flexibility and productivity. Compact design, excellent maneuverability and precise control help you optimize your warehouse, maximizing cube utilization and providing superior performance at heights. Designed for full pallet handling or a combination of case picking and pallet handling, Crown’s TSP 6000, 1.5 TSP and 1.8 TS turret trucks work in aisles only slightly wider than the truck itself. |
|
MTC10, MTC13, MTC15
Capacity: 1000, 1300, 1500kg
- Man up turret truck
- Integrated pantograph
- Sealed AC Motors
- High Performance
- Ergonomic seating and controls
- Simultaneous controls, patented hydraulic system
- Rail or wire guide options |
|
Forte UFS
The four-way truck is a reach truck which can also be driven sideways thanks to the fact that all 3 wheels can swivel.
It therefore gives a very space-saving and flexible handling of long goods and other bulky goods such as building boards.
|
|
Our MOFFETT M8 25.4 is a multi-directional (4-way) machine that can be switched from a normal forklift to a reach-truck in a split second! It provides the solution to transferring loads up to 2,5 tons and with the ability to work in the worst off-road conditions, it is the most advanced machine of its kind.
The M8 25.4 is also available with Moffett's patented Lift Assist and one sided off-loading package, a combination which enables one man and one machine to load and unload from just one side of the truck or trailer. The use of this system allows the Moffett to operate at full load capacity thus minimising time on site and boosting productivity. |
|
Omni DCT
Narrow aisle stackers which lift the driver together with the load, giving a very good view and control of load and handling.
Used mainly in rail-guided aisles, but also free-ranging across the whole warehouse. The combi truck is suitable for both stacking and picking.
|
|
| 1985 was the most meaningful year for the world’s forklift industry since the development of the first forklift in 1917 by Clark. In 1985, Clark’s Genesis series’ customer oriented concept truck was more than an evolution in the industry, it became the standard for what is now a common sense design for every forklift truck. |
|
TB Series
Turret Trucks |
- 1.2 tonnes
If working in narrow aisles %u2013 and shifting/storing goods at great heights %u2013 is part of your operation, our turret trucks will prove to be valuable allies. Their robust turret head design is complemented by all the comfort, performance and productivity you would expect from any Mitsubishi truck.
Special design ensures maximum cube utilisation.
Works in particularly narrow aisles (1700mm) and lifts to 9000mm, optimising storage density.
Ergonomic control allows operator to work quickly yet safely.
Truck is totally programmable to match your individual application.
Large capacity 876Ah battery available for extra-long shift life. |
|
As the largest selling reach-fork truck in North America, Raymond offers the 7000 Series and Easi Reach-Fork Truck. They help operators work with maximum efficiency in narrow aisles; store and retrieve loads with precision and at unprecedented heights; and make your operations more productive than ever.
Optimize Productivity
Quicker acceleration
Universal or Bidirectional Stance for operator to face direction of work
Open view mast gives unprecedented visibility
ACR System™ a combination of AC technology and exceptional ergonomics |
|
ONES CABIN
For comfort in cold room. Many versions exist. Comfortable cabin (heated to 20 °), even in the warehouses with - 30 °C. Very good visibility, heated panes, etc... Lifting up to 10 meters. Capacity: 1400/1600/2000 kg |
|
|
